Matthew Southgate

Dr. Matthew Southgate


Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 January 2012 in IEEE Microwave Magazine
Verified
Journal Article
Closed access
SHStuart Harmer
Stuart Harmer
NBNicholas Bowring
Nicholas Bowring
DADavid Andrews
David Andrews
NRNacer Rezgui
Nacer Rezgui
MSMatthew Southgate
Matthew Southgate
SSSarah Smith
Sarah Smith
There is now, more than ever before, a need for technologies that enable the screening of people from a distance. A wide variety of weapons can be easily concealed under clothing and carried into crowded public sites to target national infrastructure, spread fear, and inflict mass murder and casualties. The most feared and devastating terrorist weapon is the suicide bomb or person borne improvised explosive device (PBIED). Such devices are relatively simple to conceal on the body, and successful detection is required at considerable distance or stand-off range before the bomber reaches the target area.

16 July 2013 in IEEE Sensors Journal
Verified
Journal Article
Closed access
DADavid A. Andrews
David A. Andrews
SHStuart William Harmer
Stuart William Harmer
NBNicholas J. Bowring
Nicholas J. Bowring
NRNacer D. Rezgui
Nacer D. Rezgui
MSMatthew Southgate
Matthew Southgate
We present a millimeter radar for threat level evaluation developed for the detection concealed threats, such as guns and person borne improvised explosive devices (PBIED). The system uses a Gaussian optic lens antenna to achieve stand-off ranges up to 25 m. Ultra-wideband swept frequency radar, using direct detection receivers, is implemented to achieve short radar range resolution . The system is capable of detecting a wide range of objects positioned in front of the body by interpretation of the scattered waveform. Threat detection is rendered autonomously by a neural network that processes the scattered polarimetric, depth domain radar waveforms. The system may be configured to alarm or reject certain classes of objects, allowing for the detection of specific or broad spectrum threats. The radar system is portable and manually steered by the operator to enable standoff monitoring of walking human targets in real time. A video feed provides the operator with a wide field of view that allows tracking of persons and greatly facilitates aiming of the sensor. Rapid (1 ms) radar sweep times and fast signal acquisition and processing are implemented to provide threat detection at video frame rates (30 fps). Performance parameters for the detection of hand-guns and simulated PBIED are presented for ranges up to 25 m.

1 November 2019 in Royal Society Open Science
Verified
Journal Article
Open access
RCRyan Cunnigham
Ryan Cunnigham
MSMaría B. Sánchez
María B. Sánchez
PBPenelope B. Butler
Penelope B. Butler
MSMatthew Southgate
Matthew Southgate
ILIan Loram
Ian Loram
The aim of this study was to provide automated identification of postural point-features required to estimate the location and orientation of the head, multi-segmented trunk and arms from videos of the clinical test ‘Segmental Assessment of Trunk Control’ (SATCo). Three expert operators manually annotated 13 point-features in every fourth image of 177 short (5–10 s) videos (25 Hz) of 12 children with cerebral palsy (aged: 4.52 ± 2.4 years), participating in SATCo testing. Linear interpolation for the remaining images resulted in 30 825 annotated images. Convolutional neural networks were trained with cross-validation, giving held-out test results for all children. The point-features were estimated with error 4.4 ± 3.8 pixels at approximately 100 images per second. Truncal segment angles (head, neck and six thoraco-lumbar–pelvic segments) were estimated with error 6.4 ± 2.8°, allowing accurate classification (F1 > 80%) of deviation from a reference posture at thresholds up to 3°, 3° and 2°, respectively. Contact between arm point-features (elbow and wrist) and supporting surface was classified at F1 = 80.5%. This study demonstrates, for the first time, technical feasibility to automate the identification of (i) a sitting segmental posture including individual trunk segments, (ii) changes away from that posture, and (iii) support from the upper limb, required for the clinical SATCo.

9 July 2020 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Verified
Journal Article
Open access
PDF file
MFMuhammad Asad Bilal Fayyaz
Muhammad Asad Bilal Fayyaz
AAAris C Alexoulis-Chrysovergis
Aris C Alexoulis-Chrysovergis
MSMatthew Southgate
Matthew Southgate
CJChristopher Johnson
Christopher Johnson
A Level Crossing remains as one of the highest risk assets within the railway system often depending on the unpredictable behaviour of road and footpath users. For this purpose, interlocking through automated safety systems remains a key area for investigation. Within Europe, 2015–2016, 469 accidents at crossings were recorded of which 288 lead to fatalities and 264 lead to injuries. The European Union’s Agency for Railways has reported that Level Crossing fatalities account for just under 28% of all railway fatalities. This paper identifies suitable obstacle detection technologies and their associated algorithms that can be used to support risk reduction and management of Level Crossings. Furthermore, assessment and decision methods are presented to support their application. Finally state of the art and synergistic opportunity of which a combination of obstacle detection sensors with intelligent decisions layers such as Deep Learning are discussed which can provide robust interlocking decisions for rail applications. The sensor fusion of video camera and RADAR is a promising solution for Level Crossings. By applying additional sensing techniques such as RADAR imaging, further capabilities are added to the system, which can lead to a more robust approach.

Verified
Journal Article
Open access
PDF file
Peyman AmiriPeyman Amiri
Peyman Amiri
MMMarcus Müller
Marcus Müller
MSMatthew Southgate
Matthew Southgate
TTTHEODOROS THEODORIDIS
THEODOROS THEODORIDIS
Guowu WeiGuowu Wei
Guowu Wei
William HolderbaumWilliam Holderbaum
William Holderbaum
This paper aims to elucidate the state-of-the-art, prevailing priorities, and the focus of the industry, and identify both limitations and potential gaps regarding industrial robots and collaborative robots (cobots). Additionally, it outlines the advantages and disadvantages of cobots compared to traditional industrial robots. Furthermore, three novel factors are introduced in this survey as metrics to evaluate the efficiency and performance of industrial robots and cobots. To achieve these purposes, a statistical analysis and review of commercial articulated industrial robots and cobots are conducted based on their documented specifications, such as maximum payload, weight, reach, repeatability, average maximum angular speed, and degrees of freedom (DOF). Additionally, the statistical distributions of the efficiency factors are investigated to develop a systematic method for robot selection. Finally, specifications exhibiting strong correlations are compared in pairs using regressions to find out trends and relations between them, within each company and across them all. The investigation of the distribution of specifications demonstrates that the focus of the industry and robot makers is mostly on articulated industrial robots and cobots with higher reach, lower payload capacity, lower weight, better repeatability, lower angular speed, and six degrees of freedom. The regressions reveal that the weight of robots increases exponentially as the reach increases, primarily due to the added weight and torque resulting from the extended reach. They also indicate that the angular speed of robots linearly decreases with increasing reach, as robot manufacturers intentionally reduce the angular speed through reductive gearboxes to compensate for the additional torque required as the reach extends. The trends obtained from the regressions explain the reasons behind these interrelationships, the design purpose of robot makers, and the limitations of industrial robots and cobots. Additionally, they help industries predict the dependent specifications of articulated robots based on the specifications they require. Moreover, an accompanying program has been developed and uploaded on to GitHub, taking the required specifications and returning a list of proper and efficient robots sourced from different companies according to the aforementioned selection method.

27 April 2007
Verified
Conference Paper
Closed access
PDF file
NBN. J. Bowring
N. J. Bowring
JBJ. G. Baker
J. G. Baker
NRN. D. Rezgui
N. D. Rezgui
MSMatthew Southgate
Matthew Southgate
JAJ. F. Alder
J. F. Alder
Extensive work has been published on millimetre wave active and passive detection and imaging of metallic objects concealed under clothing. We propose and demonstrate a technique for revealing the depth as well as the outline of partially transparent objects, which is especially suited to imaging layer materials such as explosives and drugs. The technique uses a focussed and scanned FMCW source, swept through many GHz to reveal this structure. The principle involved is that a parallel sided dielectric slab produces reflections at both its upper and lower surfaces, acting as a Fabry-Perot interferometer. This produces a pattern of alternating reflected peaks and troughs in frequency space. Fourier or Burg transforming this pattern into z-space generates a peak at the thickness of the irradiated sample. It could be argued that though such a technique may work for single uniform slabs of dielectric material, it will give results of little or no significance when the sample both scatters the incident radiation and gives erratic reflectivities due to its non-uniform thickness and permittivity . We show results for a variety of materials such as explosive simulants, powder and drugs, both alone and concealed under clothing or in a rucksack, which display strongly directional reflectivities at millimeter wavelengths, and whose location is well displayed by a varying thickness parameter as the millimetre beam is scanned across the target. With this system we find that samples can easily be detected at standoff distances of at least 4.6m.