Geocell reinforcement (GR) improves load-deformation behavior of shallow foundations. A series of instrumented large-scale plate load tests was performed to ascertain such improvements and to correlate that to the relative density (Dr) of geocell-reinforced sand (GRS). Variable effects on stiffness, bearing capacity (BC), load dispersion and strain-stress behaviors are discussed. The extensive tests made it possible to arrive at a simplified analytical procedure for predicting the BC of circular footings on GRS, taking into account probable shear failure mechanisms and monitored GR deformation. These results allowed the validation and generalization of the procedure reduced from an equivalent-layer BC model considering ‘confinement’ and ‘stress dispersion’ effects on the failure mechanism. Load dispersion angle and strains increase with increasing the sand Dr resulted in significant stress reduction below the GR. This was found most beneficial for the higher densities ranges. The proposed analytical approach can confidently be used for practical design purposes.
The soil stratum is heterogeneous and may be tilted with significant influence on the footing bearing capacity (BC). In this paper, a combination of influence of the anisotropy orientation and thickness of soil layer and rock stratum inclination on the BC of strip footings was evaluated using a random finite-difference method (RFDM). The Monte Carlo simulation (MCS) approach was used to elucidate the effect of spatial variability, and soil strength characteristics were assumed as log-normal and bounded random fields. The failure mechanism and produced shear strain in probabilistic method were compared to those obtained from deterministic analysis. The results showed that the soil stratum inclination has a significant effect on the footing BC magnitude, which reaches a minimum value when the deposition orientation is 45°−ϕ/2 with the horizontal direction (ϕ = soil friction angle). Parametric studies were performed on the variability level of strength parameters, the correlation coefficient of strength characteristics, correlation length, soil layer thickness, and stratification orientation.
Bearing capacity (BC) test results are presented for bounded and unbounded twin circular footings on unreinforced and geocell-reinforced (GCR) sand. Analysis of the results demonstrate material, scale and size effects on the BC for a given combination in materials (sand-GCR), footing (single-twin) and the problem geometric dimensions. The significance of these combinations on BC and settlements is used to arrive at suitably modified BC factors for design that could be generalized. Plots given relative to reference cases for which BC design solutions are available provide correction factors to modify classical BC equations. Values of the BC and BC factors represent the lumped effect of all or separate problem variables including scale and any experimental limitations. Compared with previous works, these results give deeper critical depths for twin footings on unreinforced and GCR sand and BC higher than 4 times the reference case.
29 July 2025 in Iranian Journal of Science and Technology, Transactions of Civil Engineering