The most singular characteristic of pervious concrete is its interconnected porosity that allows water to flow through at high rates. The objective of this paper is to develop and validate an advanced DEM-CFD model to assess the permeability of pervious concrete numerically, taking into account the influence of the composition and of the compaction process. An extensive experimental program with 1 aggregate grading size, 4 paste contents and 3 degrees of compaction was conducted to validate the numerical approach. Results show that the DEM-CFD model is capable of predicting the permeability depending on the variables considered here. Moreover, flow parameters derived from the numerical simulations help understand the experimental results. The study confirms that, instead of relying on trial and error experiments, it is possible to use advanced numerical models to accelerate the definition of mixes and the production process, reducing the time, efforts and costs required.Peer ReviewedPostprint (author's final draft
The objective of this paper is to propose a novel numerical approach to evaluate the fresh state behavior of pervious concrete (PC). A new constitutive law applied to Discrete Element Method was developed for the simulation of the interaction between aggregates connected by fresh cement paste. Several innovative aspects regarding the type of contact model, the consideration of the contact bridge and the inclusion of the rheology coefficients were proposed. A calibration was performed with data from the literature. Furthermore, an extensive experimental program considering different shapes of aggregates, grading curves and aggregate-to-cement paste ratios was conducted to evaluate the fresh state behavior and validate the numerical models. The good fit obtained between numerical and experimental results confirm the model and the constitutive law reproduce the under uniaxial compaction, thus representing a step forward in the design and application of pervious concrete mixes.Peer ReviewedPostprint (author's final draft
This study aims to investigate the properties of pervious concrete focusing on characterization tests by the Ultrasound Method. For this, three mixtures were produced with the paste/aggregate (P/Ag) ratio ranging from 0.45 to 0.65, water to cement ratio (w/c) of 0.3, and all the specimens were compacted with a steel rod. The application of the ultrasound method deserves special attention for the characterization of pervious concrete, due to a lack of research and the potential to develop analytical models for predicting properties from ultrasonic pulse velocity (UPV) as an independent variable. The UPV obtained in this study ranged from 3642 to 4262 m/s for an approximately 12% reduction in porosity, with a correlation (R²) of 0.91. It is noteworthy that the high porosity of pervious concrete causes attenuation of the ultrasonic wave. The measurements of UPV had higher values for specimens with higher densities (R²=0.87), higher compressive and tensile strengths (R² of 0.79 and 0.84, resp.), and lower permeability (R² = 0.91).
1 November 2015 in Construction and Building Materials
This paper presents a simplified model for the simulation of the compaction of deformable granular materials such as pervious concrete in the fresh state. The strategy is to use an evolutionary lattice system with local instability to simulate the intensive internal rearrangement expected during compaction. This is associated with a bar layout and material properties that vary with the time steps. Furthermore, a biphasic particle composed by a rigid inner core involved by a deformable exterior layer is considered. This versatile approach allows a simplified representation of complex granular media made of very deformable particles or of rigid particles covered by a flexible binder. Numerical and experimental comparisons were conducted to evaluate the capacity of the method to predict the behavior of different materials. The results indicate that the model may provide an estimation of the forces applied during the compaction, being suitable for a wide range of applications.Peer ReviewedPostprint (author's final draft