Chalcogenide glasses have attracted growing interest for their potential to meet the demands of photonic applications in the Mid-Wavelength InfraRed (MWIR) and Long-Wavelength InfraRed (LWIR) transmission windows. In this work, we investigated the photosensitivity to femtosecond laser irradiation of a dedicated chalcogenide glass, along with its possible applications in micro-optics. In order to address the SWaP problem (Size, Weight and Power), this work took advantage of recent techniques in femtosecond laser direct writing to imprint flat and integrated optical systems. Here, we wanted to simplify an infrared multispectral imaging system which combines a lens array and a filter array. Each channel has a focal length of 7 mm and an f-number of 4. We show in this paper that the chosen GeS2-based chalcogenide glass is very promising for the fabrication of graded index optics by fs-laser writing, and particularly for the fabrication of Fresnel lenses. We note a very important phase variation capacity in this infrared material corresponding to refractive index variations up to +0.055. A prototype of Fresnel GRIN lens with a refractive index gradient was fabricated and optically characterized in the Vis range.
Chalcogenide glasses are increasingly being developed for photonic applications, particularly in the field of mid-infrared optical imaging. In this paper, we study the photosensitivity of one chalcogenide to direct femtosecond laser writing and its possible applications to micro-optics. Particular attention has been paid to the creation of phase changes and related refractive index variations. This chalcogenide glass was compared with two commercial heavy oxide glasses: Schott SF10 and Corning 9754. We observed different types of permanent modifications depending on the writing speed and the laser pulse energy. Index variations were measured at in the chalcogenide glass while maintaining spectral transmission similar to the pristine materials before irradiation. This provides a good candidate to design optical components for infrared application and helps to unlock the potential of the femtosecond laser direct writing technique to implement at high writing speed and high index changes with low optical losses.
De nombreuses recherches sont aujourd'hui menées afin de miniaturiser et simplifier les caméras infrarouges dans le but de les intégrer à de petits porteurs tels que des micro drones. L'objectif est de fonctionnaliser des composants habituellement inutilisables en conception optique tels que les filtres ainsi que de mieux corriger les aberrations optiques. Dans ce cadre, la texturation par laser femtoseconde permet de créer des gradients d'indice de réfraction à l'intérieur de la matière. La flexibilité de la technique pourrait permettre la fabrication de composants optiques non-conventionnels. Dans ce contexte, nous avons étudié la méthode de la texturation par laser femtoseconde afin de créer des lentilles à gradient d'indice dans quatre matériaux spécifiques et dans le but de simplifier des caméras infrarouges. Trois types de lentilles à gradient d'indice ont été modélisées : une lentille boule à gradient d'indice sphérique permettant de corriger les aberrations optiques, une lentille plate à gradient d'indice de petit diamètre permettant de simplifier une caméra dans le LWIR et une lentille de Fresnel plate à gradient d'indice permettant de simplifier une caméra cryogénique dans le MWIR. Les lentilles plates ont ensuite été fabriquées et partiellement caractérisées. Cette étude a ainsi permis de montrer la capacité de la texturation par laser femtoseconde à fabriquer des optiques à gradient d'indice.