Synthetic aperture radar (SAR) systems have the capacity for day-and-night and all-weather surveillance, which has become increasingly indispensable for military surveillance and global comprehensive environmental monitoring. With the development of the high-resolution SAR imaging technique, studies on SAR jamming have also received much interest. Traditional jamming methods are based on linear-frequency-modulated (LFM) signals, and this method can achieve high main-lobe jamming gain. However, its sidelobe jamming energy is very low. To solve this issue, a novel nonlinear frequency modulation (NLFM) waveform design method for SAR jamming is proposed in this paper. Compared with LFM waveforms, the designed waveforms have the same main-lobe jamming gain and very high sidelobes, which can significantly improve jamming performance. Moreover, detailed simulation experiments were carried out to verify the effectiveness of the newly proposed jamming scheme.

Synthetic Aperture Ladar (SAL) is a sensor that combines laser detection technology with synthetic aperture technology to achieve ultra-high-resolution imaging. Due to its extremely short wavelength, SAL is more sensitive to motion errors. The micrometer-level motion will affect the target’s azimuth focus. This article proposes an SAL motion compensation method based on Symmetric Triangular Linear Frequency Modulation Continuous Wave (STLFMCW) segmented interference, utilizing the characteristics of a triangular wave, to solve the problem of target azimuth defocusing. This article first establishes an STLFMCW echo signal model based on the SAL system under the influence of motion errors. Secondly, the radial velocity gradient along the azimuth direction is extracted using the triangular-wave-positive and -negative frequency modulation signals segmented interference method. Then, for the initial phase wrapping problem, the frequency spectral cross-correlation method is used to accurately estimate the initial radial velocity error. The radial velocity gradient is integrated along the azimuth to obtain the platform motion trajectory. Finally, the compensation functions are constructed to complete the echo Range Cell Migration (RCM) correction and residual phase compensation, resulting in a focused SAL image. This article verifies the practical effect of this method in eliminating motion errors using only one-period STLFMCW signal through simulation and real experiments. The quantitative results show that compared with the traditional method, the proposed method reduces the azimuth Peak Sidelobe Ratio (PSLR) by 8dB and the Integrated Sidelobe Ratio (ISLR) by 9 dB. This method has significant improvements and is of great significance for high-resolution FMCW SAL imaging.

This paper proposes an improved multi-frame coherent integration algorithm to improve the detection performance of weak targets in heterogeneous radar. In the detection of weak targets, integration within a single frame may fail to provide sufficient signal-to-noise ratio (SNR) gain. In this case, multi-frame coherent integration is an effective solution. However, radar parameters may be different across frames (i.e., heterogeneous radar) in some practical situations, leading to a mismatch of Doppler frequencies and the fixed phases, which poses difficulties to multi-frame coherent integration. To calibrate the ranges and Doppler frequencies of heterogenous multi-frame echoes, this paper firstly employs an improved Keystone Transform (KT). Compared to conventional KT, the improved KT aligns inter-frame carrier frequencies by applying varying degrees of slow-time rescaling based on the carrier frequencies of each frame, and aligns inter-frame Pulse Repetition Frequencies (PRF) through a unified global slow-time resampling. Secondly, this paper derives the explicit expressions of the fixed-phase terms and adopts a method based on fractional range bins, thus achieving explicit compensation for mismatched phases. Finally, heterogenous multi-frame coherent integration is achieved through slow-time fast Fourier transform. The effectiveness of the proposed algorithm is validated by simulation analyses. Compared to existing entropy-based methods, the proposed algorithm demonstrates higher robustness and lower computational complexity, making it more effective in detecting weak targets under low SNR conditions.

Deploying Passive Multistatic Radar (PMR) on mobile platforms provides covert and cost-effective monitoring over a large area, offering certain advantages in countermeasure. However, mobile PMR faces significant challenges, such as Doppler distortion and phase deviations. A multi-parameter space target detection method is proposed for mobile PMR to achieve target detection in three-dimensional environments. By estimating the Doppler Frequency Rate (DFR), applying bistatic range phase compensation, and implementing azimuth time integration, frame division, and data fusion, the detection accuracy and the Signal-to-Noise Ratio (SNR) are improved. Simulation results indicate that the proposed method significantly enhances the SNR and produces accurate detection results, demonstrating its efficacy.

Circular synthetic aperture radar (CSAR), which can observe the region of interest for a long time and from multiple angles, offers the opportunity for moving-target detection (MTD). However, traditional MTD methods cannot effectively solve the problem of high probability of false alarm (PFA) caused by strong clutter. To mitigate this, a novel, three-step scheme combining clutter background extraction, multichannel clutter suppression, and the degree of linear consistency of radial velocity interferometric phase (DLRVP) test is proposed. In the first step, the spatial similarity of the scatterers and the correlation between sub-aperture images are fused to extract the strong clutter mask prior to clutter suppression. In the second step, using the data remaining after elimination of the background clutter in Step 1, an amplitude-based detector with higher processing gain is utilized to detect potential moving targets. In the third step, a novel test model based on DLRVP is proposed to further reduce the PFA caused by isolated strong scatterers. After the above processing, almost all false alarms are excluded. Measured data verified that the PFA of the proposed method is only 20% that of the comparison method, with improved detection of slow and weakly moving targets and with better robustness.

This paper presents a new two-stage approach for suppressing strong clutter and detecting moving targets using scatterers’ spatial structure and signal similarity. Compared with the traditional strong clutter suppression methods, the proposed method considers both the spatial similarity and the channel correlation of the scatterers, effectively alleviating the false alarm probability and avoiding the missed detection problem caused via identifying strong moving targets as strong stationary clutter. Additionally, a detector is presented based on the linear degree of the radial velocity interferometric phase (LDRVP) to eliminate false alarms from isolated strong scatter points and the edges of strong scatterers. The experimental results of the X-band radar indicate the presented approach’s lower false alarm probability and superior robustness.