The widespread popularity of the smartphone and the increasing integrated sensors, make it possible to provide the location-based service for anyone at anytime, anywhere. The pedestrian location based on the smartphone becomes a kind of wonderful solution for indoor/outdoor positioning. A smartphone fusion location method optimized by the indoor/outdoor detection is proposed in this paper. The light sensor signal, the magnetic sensor signal, and the global navigation satellite system (GNSS) signal are integrated into the navigation algorithm to improve the accuracy of the location identification. When the device is detected indoors, the pedestrian dead reckoning algorithm based on the accelerometers and gyroscopes is applied, the initial location and the heading direction values are obtained with the help of the mobile image sensor and the indoor electronic map. When the device is detected outdoors, the GNSS and the magnetic sensor are introduced in the system to assist the inertial process of the navigation. The experiment results indicate that the continuity and the accuracy of the seamless position between the two environments are effectively improved. It is a no-blind area indoor/outdoor navigation with the help of the indoor/outdoor detection method proposed in the paper.
An integrated navigation system coupled with additional sensors can be used in the Micro Unmanned Aerial Vehicle (MUAV) applications because the multi-sensor information is redundant and complementary, which can markedly improve the system accuracy. How to deal with the information gathered from different sensors efficiently is an important problem. The fact that different sensors provide measurements asynchronously may complicate the processing of these measurements. In addition, the output signals of some sensors appear to have a non-linear character. In order to incorporate these measurements and calculate a navigation solution in real time, the multi-sensor fusion algorithm based on factor graph is proposed. The global optimum solution is factorized according to the chain structure of the factor graph, which allows for a more general form of the conditional probability density. It can convert the fusion matter into connecting factors defined by these measurements to the graph without considering the relationship between the sensor update frequency and the fusion period. An experimental MUAV system has been built and some experiments have been performed to prove the effectiveness of the proposed method.
Multipath interference seriously degrades the performance of Global Navigation Satellite System (GNSS) positioning in an urban canyon. Most current multipath mitigation algorithms suffer from heavy computational load or need external assistance. We propose a multipath mitigation algorithm based on the steepest descent approach, which has the merits of less computational load and no need for external aid. A new ranging code tracking loop is designed based on the steepest descent method, which can save an early branch or a late branch compared with the narrow-spacing correlation method. The power of the Non-Line-of-Sight (NLOS) signal is weaker than that of the Line-of-Sight (LOS) signal when the LOS signal is not obstructed and with a relatively high Carrier Noise Ratio (CNR). The peak position in the X-axis of the ranging code autocorrelation function does not move with the NLOS interference. Meanwhile, the cost function is designed according to this phenomenon. The results demonstrate that the proposed algorithm outperforms the narrow-spacing correlation and the Multipath Estimated Delay Locked Loop (MEDLL) in terms of the code multipath mitigation and computation time. The Standard Deviation (STD) of the tracking error with the proposed algorithm is less than 0.016 chips. Moreover, the computation time of the proposed algorithm in a software defined receiver is shortened by 24.21% compared with the narrow-spacing correlation.
The low-altitude economy heavily relies on new carriers represented by unmanned aerial vehicles (UAVs). The localization accuracy of UAVs highly relies on the Global Navigation Satellite System (GNSS), which can be easily affected in low-altitude urban environments, making it difficult to maintain effective localization accuracy. To solve this problem, this paper proposes a UAV autonomous localization method with keypoints on the edges of semantic objects (KESO). Firstly, semantic objects within the working area are selected, and then the latitude, longitude, and altitude of these semantic objects’ keypoints are measured to construct a database. By identifying the semantic objects from aerial images and detecting the edge of the semantic objects, the keypoints of the semantic objects are obtained. Finally, by matching the detected keypoints in the aerial images with the keypoints in the database, the UAV’s position can achieve a high-precision position when satellite signals are blocked in low-altitude urban environments. As verified by real flight data, the results show that the localization error is less than 5 m, and the edges of objects can obtain more accurate keypoints to help UAVs locate more accurately. This paper can provide a reference for UAV localization in the urban environments of the low-altitude economy.
The acquisition and tracking strategies of the BeiDou navigation satellite signals are affected by the modulation of Neumann-Hoffman code (NH code), which increases the complexity of receiver baseband signal processing. Based on the analysis of probability statistics of the NH code, a special sequence of incoming signals is proposed to evade the bit transitions caused by the NH code, and an NH Code Evasion and Stripping method (NCES) based on the NH-pre-modulated code is proposed. The NCES can be applied in both 20-bit NH code and 10-bit NH code. The fine acquisition eliminates the impact of NH code on the traditional tracking loop. These methods were verified with a BeiDou PC-based software-defined receiver using the actual sampled signals. Compared with other acquisition schemes which try to determine or ignore the NH code phase, the NCES needs fewer incoming signals and the actual runtime is greatly reduced without sacrificing much time to search in the secondary code dimension, and the success rate of acquisition is effectively improved. An extension of Fast Fourier Transform (FFT)-based parallel code-phase search acquisition gives the NCES an advantage in engineering applications.