High–speed, high–power photodiodes play a key role in wireless communication systems for the generation of millimeter wave (MMW) and terahertz (THz) waves based on photonics–based techniques. Uni–traveling–photodiode (UTC–PD) is an excellent candidate, not only meeting the above–mentioned requirements of broadband (3 GHz~1 THz) and high–frequency operation, but also exhibiting the high output power over mW–level at the 300 GHz band. This paper reviews the fundamentals of high–speed, high–power photodiodes, mirror–reflected photodiodes, microstructure photodiodes, photodiode–integrated devices, the related equivalent circuits, and design considerations. Those characteristics of photodiodes and the related photonic–based devices are analyzed and reviewed with comparisons in detail, which provides a new path for these devices with applications in short–range wireless communications in 6G and beyond.

We present the experimental realization of an innovative parallel partially overlapping waveguides (PO-WGs) model grounded in the thermal accumulated regime and fabricated using femtosecond (fs) laser direct-writing within low-iron bulk glass. The 75mm long novel PO-WGs model was made by partially overlapping the shell parts of two core-shell types of waveguides via a back-and-forth single pass fs-laser inscription. The detailed evolution of the PO-WGs model from inception to completion was offered, accompanying by a thorough characterization, which unveils a substantial refractive index (RI) change, on the order of 10⁻³, alongside low propagation loss (0.2 dB/cm) and distinctive features associated with the single mode and shell-guided light. Notably, the unsaturated performance of PO-WGs model after the primary inscription paves the way for potential applications in the successful creation of two distinctive types of Bragg gratings: first-order dot-Bragg grating and second-order line-Bragg grating. The 75 mm long dot-Bragg grating was written by a periodic dot array with a height of 6 µm atop the PO-WGs, and the birefringence was measured of 1.5 × 10⁻⁵ with a 16 pm birefringence-induced wavelength difference. The line-Bragg grating, which was inscribed with dual PO-WGs extending the line grating part to 40 mm in length along its period for increasing the transmission dip, exhibits a pronounced polarization dependence showcasing an effective birefringence of 4.2 × 10⁻⁴ at the birefringence-induced wavelength difference of 0.45 nm. We delved into the slow-light effects of the two Bragg gratings thoroughly, which the theoretical analysis revealed an effective group delay of 0.58 ns (group index 2.3) for the dot-Bragg grating. Similarly, the line-Bragg grating exhibited an effective group delay of 0.3 ns (group index 2.3), in good agreement with experimental measurements. These findings underscore the exciting potential of our gratings for creating optical slow-wave structures, particularly for future on-chip applications.

We propose what we believe to be a novel metastructure consisting of silicon nanoblock tetramer clusters and investigated theoretically and experimentally how to enhance surface sensing capabilities with polarization-independent properties through bound states in the continuum (BICs). By introducing square defects, three quasi-BIC modes are excited at the wavelengths of 1013.29 nm, 1109.57 nm, and 1310.73 nm with a modulation depth up to 100% and a Q-factor of 16618, while achieving a sensitivity of 256 nm/RIU and a figure of merit of 2519.7 RIU⁻¹. Utilizing the finite-difference method in the time domain (FDTD), we have analyzed the electromagnetic near-field distributions, polarization properties, and robustness corresponding to resonance dips at different wavelengths. Our results reveal that the distinct electromagnetic near-field distributions excited by the quasi-BIC modes are characterized by the strong field confinement within the silica nanoblock tetramer clusters. The modes are primarily governed by magnetic quadrupole (MQ) resonance and toroidal dipole (TD) moment. Additionally, the polarization-independent properties of the metastructure are demonstrated to ensure that they can effectively respond to the incident light regardless of its polarization state, while the robustness is investigated to show the stability and reliability by shifting square defects. Moreover, the transmission spectra of the metastructure is experimentally verified by immersing the sample into CaCl₂ solutions in different concentrations. This work plays a pivotal role in creating further novel and high-performance optical metastructures while demonstrating the potential applications of quasi-BIC modes in precision sensing in the future.