A polyvinylidene fluoride (PVDF) film-based capacitive biosensor was developed for glucose sensing. This device consists of a PVDF film sandwiched between two electrodes. A capacitive biosensor measures the dielectric properties of the dielectric layers at the interface between the electrolyte and the electrode. A glucose oxidase (GOx) enzyme was immobilized onto the electrode to oxidize glucose. In practice, the biochemical reaction of glucose with the GOx enzyme generates free electron carriers. Consequently, the potential difference between the electrodes is increased, resulting in a measurable voltage output of the biosensor. The device was tested for various glucose concentrations in the range of 0.013 to 5.85 M, and various GOx enzyme concentrations between 4882.8 and 2.5 million units/L. We found that the sensor output increased with increasing glucose concentration up to 5.85 M. These results indicate that the PVDF film-based capacitive biosensors can be properly applied to glucose sensing and provide opportunities for the low-cost fabrication of glucose-based biosensors based on PVDF materials.
Students' critical thinking skills are still not optimal. One of the reasons is the use of teaching materials in the form of student worksheets that are not yet in line with the good student worksheet structure, do not yet contain the STEM approach, and critical thinking indicators have not been clearly illustrated in the student worksheet. The purpose of this study is to determine the validity of the LKPD, determine the practicality and effectiveness of using student worksheet Physics based on the STEM approach that can improve students' critical thinking. This type of research is research and development (R&D) using the Borg & Gall model which consists of the initial research and information gathering stage, planning, developing the initial product format, and initial trials. As the object of research is the Physics student worksheet based on the STEM approach. Data collection instruments used were expert validation sheets, practicality test sheets, and effectiveness test sheets. The effectiveness test uses an assessment sheet of learning outcomes tests and observation sheets of students' critical thinking. The data analysis technique used is the analysis of the validity of the Physics student worksheet, the practicality analysis of the use of the Physics student worksheet, and the effectiveness analysis of the use of the Physics student worksheet. Based on the analysis of the data that has been done, two research results can be put forward. First, the average value of the validity of the Physics student worksheet based on the STEM approach is 0.88 and this value is included in the valid category. Second, the average value of the practicality test for the use of Physics student worksheet by teachers and students respectively 91.44 and 84.14. This value shows the Physics student worksheet is in the category of very practical. Besides that, the use of Physics student worksheet based on the STEM approach is effective to improve students' critical thinking
1 April 2019 in Journal of Physics: Conference Series
The research aims to synthesis of magnetite nanoparticle from iron sand by mechanomhemical route. The XRF graph of showed the dominant mineral content of the iron sand is SiO2 (36.09%), Fe2O3 (34.015%) and Al2O3 (10.034%). Hereinafter, the Iron oxide nanoparticle synthesized by the ball mill method at different milling time. The XRD graph of samples after milling showed there is no diffraction peak correspond to SiO2, and it only corresponds to Fe3O4, and α-Fe2O3. also showed there is increasing magnetite (Fe3O4) purity as increasing of milling time and homogenous magnetite phase reached at 30 h milling time. The milling time affects the size of crystallites, morphology, and magnetic properties of magnetite nanoparticles. In this paper we will describe the effect of grinding time on these properties in detail.
1 April 2019 in Journal of Physics: Conference Series
In the 21st century, education plays a very important and strategic role in building a knowledgeable society that is literate technology and media, communicating effectively, critical thinking, solving problems and collaborating. The need to emphasize science, engineering, technology, and mathematics (STEM) subjects in school settings to improve 21st-century skills (such as critical thinking, creativity, curiosity, and collaboration) of individuals, began to use appropriate approaches has attracted the attention of a large number of researchers worldwide. In this paper, we report the literature study by searching and evaluating relevant materials to synthesize information from various sources related to the STEM approach in physics learning. The results of this review will be used as the theoretical reference for the development of the student worksheet using the STEM approach for the student in physics learning.
This study reports on the synthesis, characterization of polystyrene(PS)/CuO-Fe2O3 nanocomposites, and their application as hydrophobic coatings. CuO and Fe2O3 materials were synthesized from natural materials by the milling method. Meanwhile, the PS/CuO-Fe2O3 nanocomposites were synthesized by the sol-gel method. Furthermore, the hydrophobic coating on the glass substrate was made by the spin-coating. To obtain highest value of contact angle, the composition of both CuO and Fe2O3 in nanocomposite as well as calcination temperatures were varied. Sample characterization was conducted using X-ray diffraction (XRD), scanning electron microscopy (SEM), and ultraviolet visible (Uv-Vis) spectrophotometry analysis. The Sessile drop method was used to determine the contact angle of the layer. The results showed that PS/CuO-Fe2O3 nanocomposite was successfully obtained with a crystal size between 40–52 nm and grain size of 92 nm. In addition to the basic material of composites, hematite and tenorite, the presence of copper ferrite phase was also identified. The CuO-Fe2O3 composition and its large calcination temperature also plays an effective role in the magnitude of the contact angle. The highest value of contact angle obtained was 125.46° at 3:1 composition and calcination temperature of 200 °C. We found that the PS/CuO-Fe2O3 composite was hydrophobic, but the photocatalyst activity was very small at 0.24%.