Renato Mio

Mr. Renato Mio

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2018
Verified
Conference Paper
Closed access
MBMarlene Bustamante
Marlene Bustamante
RVRodrigo Vega-Centeno
Rodrigo Vega-Centeno
MSMidori Sanchez
Midori Sanchez
Renato MioRenato Mio
Renato Mio
The widespread of 3D-printing technology has resulted in the appearance of many open-source prosthetic hand models, especially for partial hand amputations. However, most of these designs are not editable and while some are parametric to some degree, customization for every user is limited to scaling the size of a base design. As consequence, most prostheses fail to closely match the user specific anthropometry and have poor aesthetics, which could result in abandonment of the device. Furthermore, achieving a high degree of customization could be a time-consuming task and requires previous knowledge of CAD design. This work presents a prosthetic hand easy to customize by changing parametric dimensions of the finger phalanges and palm on an Excel sheet. Additionally, the design tackles common issues from previous 3D-printed body-powered prosthetic hands by incorporating new features such as the use of linkages instead of cables as finger flexors and a new cable-adjusting system which requires no additional tools and makes the tensioning of finger tendons easier and quicker.

1 October 2018
Verified
Conference Paper
Closed access
Renato MioRenato Mio
Renato Mio
MSMidori Sanchez
Midori Sanchez
QVQuino Valverde
Quino Valverde
New manufacturing and rapid prototyping technologies have fueled the creation of affordable and easy to replicate upper-limb prostheses. In this matter, many types and designs of 3D-printed upper-limb prostheses have been created over the last years. However, there is no consensus in the testing methodology for these devices regarding their mechanical capabilities and the comparisons authors can make are limited to their own metrics, which could be considered as a subjective approach. In order to tackle this issue, this work revises the existing methods for testing both the mechanical resistance and the mechanical performance or efficiency of upper-limb prostheses; specifically, the ones that are relevant for 3D-printed body-powered prostheses. Then, the adaptations needed to apply these methods to 3D-printed prostheses are discussed. Finally, recommendations are given for prosthetists and researchers in order to execute reliable tests that can be compared across different hand prosthesis designs.

1 April 2017
Verified
Conference Paper
Closed access
Renato MioRenato Mio
Renato Mio
BVBruno Villegas
Bruno Villegas
LCLuis Ccorimanya
Luis Ccorimanya
KFKevin M. Flores
Kevin M. Flores
GSGiancarlo Salazar
Giancarlo Salazar
DEDante Elias
Dante Elias
New proposals for prosthetic hands fabricated by means of 3D printing are either body-powered for partial hand amputees or myoelectric powered prostheses for transradial amputees. There are no current studies to develop powered 3D printed prostheses for transmetacarpal, probably because at this level of amputation there is little space to fit actuators and their associated electronics. In this work, a design of a 3D-printed hand prosthesis for transmetacarpal amputees and powered by DC micromotors is presented. Four-bar linkage mechanisms were used for the index, middle, ring and little fingers flexion movements, while a mechanism of cylindrical gears and worm drive were used for the thumb. Additionally, a method for customizing prosthetic fingers to match a user specific anthropometry is proposed. Sensors and actuators' selection is explained, and a position control algorithm was developed for each local controller by modeling the DC motors and transmission mechanisms. Finally, a basic control scheme was tested on the prototype for velocity and force evaluation.

17 May 2019
Verified
Book Chapter
Closed access
PDF file
Renato MioRenato Mio
Renato Mio
MBMarlene Bustamante
Marlene Bustamante
GSGiancarlo Salazar
Giancarlo Salazar
DEDante A. Elias
Dante A. Elias

1 January 2019 in Advances in Science, Technology and Engineering Systems Journal
Verified
Journal Article
Open access
Renato MioRenato Mio
Renato Mio
MSMidori Sanchez
Midori Sanchez
QVQuino Valverde
Quino Valverde
JLJosé Lara
José Lara
FRFrancisco Rumiche
Francisco Rumiche

17 May 2019
Verified
Book Chapter
Closed access
PDF file
DEDante A. Elias
Dante A. Elias
DCDiego Cerna
Diego Cerna
CCChristian Chicoma
Christian Chicoma
Renato MioRenato Mio
Renato Mio