Qicheng Ruan

Dr. Qicheng Ruan

State Key Laboratory of Mechanical Manufacturing Systems Engineering, Xi'an Jiaotong University

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 January 2023 in Energies
Verified
Journal Article
Open access
PDF file
XLXU Liang
XU Liang
ZSZineng Sun
Zineng Sun
QRQicheng Ruan
Qicheng Ruan
Lei XiLei Xi
Lei Xi
JGJianmin Gao
Jianmin Gao
YLYunlong Li
Yunlong Li
Aeroengines and heavy-duty gas turbines are the core power equipment in the field of national defense and energy. Their research and development (R&D) level and manufacturing level represent the status of a country’s heavy industry in the world. The common cooling technologies of turbine blades including impingement cooling, film cooling, effusion cooling, layer cooling, pin fin cooling, and rough ribs were introduced in this paper. With the continuous improvement of the efficiency and performance of aeroengines and gas turbines, the turbine inlet temperature increases gradually every year; turbine blades will be exposed to higher gas temperatures in the future as gas temperatures break 2000 K. In order to ensure the safe operation of turbine blades under severe super-high temperature working conditions, cooling technology must be developed emphatically. This paper first reviews the research status of turbine blade cooling technology and points out future research focuses. The development trends of next-generation turbine blade cooling technology for above 2000 K temperature are summarized from several aspects: the innovative excavation of high-efficiency composite cooling configuration, multi-objective cooperative cooling structure and optimization design based on 3D printing, composite cooling structure design and optimization based on an artificial intelligence algorithm, tapping the cooling potential of new cooling media and heat pipes, integrated thermal protection with new thermal insulators, and the application of low-resistance and high-efficiency surface dimple cooling. The summary of this paper can provide a reference for the researchers of turbine blade cooling technology.

1 July 2021 in Energies
Verified
Journal Article
Open access
PDF file
XLXU Liang
XU Liang
QRQicheng Ruan
Qicheng Ruan
QSQingyun Shen
Qingyun Shen
Lei XiLei Xi
Lei Xi
JGJianmin Gao
Jianmin Gao
YLYunlong Li
Yunlong Li
Traditional cooling structures in gas turbines greatly improve the high temperature resistance of turbine blades; however, few cooling structures concern both heat transfer and mechanical performances. A lattice structure (LS) can solve this issue because of its advantages of being lightweight and having high porosity and strength. Although the topology of LS is complex, it can be manufactured with metal 3D printing technology in the future. In this study, an integral optimization model concerning both heat transfer and mechanical performances was presented to design the LS cooling channel with a variable aspect ratio in gas turbine blades. Firstly, some internal cooling channels with the thin walls were built up and a simple raw of five LS cores was taken as an insert or a turbulator in these cooling channels. Secondly, relations between geometric variables (height (H), diameter (D) and inclination angle(ω)) and objectives/functions of this research, including the first-order natural frequency (freq1), equivalent elastic modulus (E), relative density (ρ¯) and Nusselt number (Nu), were established for a pyramid-type lattice structure (PLS) and Kagome-type lattice structure (KLS). Finally, the ISIGHT platform was introduced to construct the frame of the integral optimization model. Two selected optimization problems (Op-I and Op-II) were solved based on the third-order response model with an accuracy of more than 0.97, and optimization results were analyzed. The results showed that the change of Nu and freq1 had the highest overall sensitivity Op-I and Op-II, respectively, and the change of D and H had the highest single sensitivity for Nu and freq1, respectively. Compared to the initial LS, the LS of Op-I increased Nu and E by 24.1% and 29.8%, respectively, and decreased ρ¯ by 71%; the LS of Op-II increased Nu and E by 30.8% and 45.2%, respectively, and slightly increased ρ¯; the LS of both Op-I and Op-II decreased freq1 by 27.9% and 19.3%, respectively. These results suggested that the heat transfer, load bearing and lightweight performances of the LS were greatly improved by the optimization model (except for the lightweight performance for the optimal LS of Op-II, which became slightly worse), while it failed to improve vibration performance of the optimal LS.

9 February 2022 in Aerospace
Verified
Journal Article
Open access
PDF file
Lei XiLei Xi
Lei Xi
JGJianmin Gao
Jianmin Gao
XLXU Liang
XU Liang
Zhen ZhaoZhen Zhao
Zhen Zhao
QRQicheng Ruan
Qicheng Ruan
YLYunlong Li
Yunlong Li
In this study, numerical simulations were carried out to investigate the flow and heat transfer characteristics of jet array impingement cooling in the quasi-leading-edge channel of gas turbine blades. The influence laws of Reynolds number (Re, 10,000 to 50,000), hole diameter-to-impingement spacing ratio (d/H, 0.5 to 0.9), hole spacing-to-impingement spacing ratio (S/H, 2 to 6), and Prandtl number (Pr, 0.690 to 0.968) on flow performance, heat transfer performance, and comprehensive thermal performance were examined, and the corresponding empirical correlations were fitted. The results show that increasing the d/H and reducing the S/H can effectively reduce the pressure loss coefficient in the quasi-leading-edge channel. Increasing the Re, reducing the d/H, and increasing the S/H can effectively enhance the heat transfer effect of the target wall. When d/H = 0.6 at lower Reynolds numbers and S/H = 5 at higher Reynolds numbers, the comprehensive thermodynamic coefficient reaches its maximum values. The average Nusselt numbers and comprehensive thermal coefficients of the quasi-leading-edge channel for steam cooling are both higher than those for air cooling. The pressure loss coefficient of the quasi-leading-edge channel is most sensitive to the change in d/H but is not sensitive to the change in Re. The average Nusselt number of the quasi-leading-edge channel is most sensitive to the change in Re and is least sensitive to the change in Pr. The comprehensive thermal coefficient of the quasi-leading-edge channel is most sensitive to the change in Re. The findings may provide a reference for the design of a steam-cooling structure in the leading edge channel of high-temperature turbine blades.

23 June 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XLXU Liang
XU Liang
QSQingyun Shen
Qingyun Shen
QRQicheng Ruan
Qicheng Ruan
Lei XiLei Xi
Lei Xi
JGJianmin Gao
Jianmin Gao
YLYunlong Li
Yunlong Li
Recently, the inlet temperatures in gas turbine units have been drastically increased, which extremely affects the lifespan of gas turbine blades. Traditional cooling structures greatly improve the high temperature resistance of the blade; however, these structures scarcely concern both heat transfer and mechanical performances. Lattice structure (LS) can realize these requirements because of its characteristics of light weight, high strength, and porosity. Although the topology of LS is complex, it can be manufactured with the 3D metal printing technology. In this study, an integral optimization method of lattice cooling structure, used at the trailing edge of turbine blades, concerned with heat transfer and mechanical performance, was presented. Firstly, functions between the first-order natural frequency (freq1), elasticity modulus (E), relative density (ρ¯), and Nusselt number (Nu), and the geometric variables of pyramid type LS (PLS) and X-type LS (XLS) were established, and the reliability of these functions was verified. Then, a mathematical optimization model was developed based on these functions which contained two selected optimization problems. Finally, relations among objectives were analyzed; influence law of geometric variables to objectives were discussed, and the accuracy of the optimal LS was proved by experiment and numerical simulation. The optimization results suggest that, compared to the initial LS, Nu increases by 24.1% and ρ¯ decreases by 31% in the optimal LS of the first selected problem, and the Nu increases by 28.8% while freq1 and ρ¯ are almost unchanged in the optimal LS of the second selected problem compared to the initial LS. This study may provide a guidance for functions integration design of lattice cooling structures used at turbine blades based on 3D printing.

8 February 2022 in Energies
Verified
Journal Article
Open access
PDF file
Zhen ZhaoZhen Zhao
Zhen Zhao
XLXU Liang
XU Liang
JGJianmin Gao
Jianmin Gao
Lei XiLei Xi
Lei Xi
QRQicheng Ruan
Qicheng Ruan
YLYunlong Li
Yunlong Li
In this study, Response Surface Methodology (RSM) and multi-objective genetic algorithm were used to obtain optimum parameters of the channels with frustum of a cone with better flow and heat transfer performance. Central composite face-centered design (CCF) was applied to the experimental design of the channel parameters, and on this basis, the response surface models were constructed. The sensitivity of the channel parameters was analyzed by Sobol’s method. The multi-objective optimization of the channel parameters was carried out with the goal of achieving maximum Nusselt number ratio (Nu/Nu0) and minimum friction coefficient ratio (f/f0). The results show that the root mean square errors (RSME) of the fitted response surface models are less than 0.25 and the determination coefficients (R2) are greater than 0.93; the models have high accuracy. Sobol’s method can quantitatively analyze the influence of the channel parameters on flow and heat transfer performance of the channels. When the response is Nu/Nu0, from high to low, the total sensitivity indexes of the channel parameters are frustum of a cone angle (α), Reynolds number (Re), spanwise spacing ratio (Z2/D), and streamwise spacing ratio (Z1/D). When the response is f/f0, the total sensitivity indexes of the channel parameters from high to low are Re, Z1/D, α and Z2/D. Four optimization channels are selected from the Pareto solution set obtained by multi-objective optimization. Compared with the reference channel, the Nu/Nu0 of the optimized channels is increased by 21.36% on average, and the f/f0 is reduced by 9.16% on average.

22 May 2024 in Energies
Verified
Journal Article
Open access
PDF file
Lei XiLei Xi
Lei Xi
YGYuan Gao
Yuan Gao
QRQicheng Ruan
Qicheng Ruan
JGJianmin Gao
Jianmin Gao
XLXU Liang
XU Liang
YLYunlong Li
Yunlong Li
Using the SST k-ω turbulence model, a comprehensive numerical investigation was conducted to analyze the flow and heat transfer characteristics of steam within an isosceles trapezoidal cooling channel with pin-fin arrays modeled from the trailing edge of a F-class gas turbine high-temperature blade. The influence laws of various parameters, including the Reynolds number (Re, from 10,000 to 50,000), dimensionless pin-fin diameter (d/H, from 0.4 to 0.8), and dimensionless pin-fin spacing (S/H, from 1.6 to 2.4), on the flow and heat transfer performance of the isosceles trapezoidal cooling channel with pin-fin arrays were examined. Sensitivity analysis was employed to determine the relative significance of these influence parameters on the cooling performance of the isosceles trapezoidal channel with pin-fin arrays. Finally, the corresponding heat transfer and friction correlations within the investigated parameter range were developed. The research findings reveal that under different Reynolds numbers, as the dimensionless pin-fin diameter increases from 0.4 to 0.8, the friction factor within the isosceles trapezoidal cooling channel with pin-fin arrays increases by a factor of 3.25 to 3.41, while the overall average Nusselt number improves by 31.05% to 37.41%. Conversely, when the dimensionless pin-fin spacing increases from 1.6 to 2.4, the friction factor within the isosceles trapezoidal cooling channel with pin-fin arrays decreases by 67.38% to 69.18%, accompanied by a reduction in the overall average Nusselt number by 24.95% to 31.14%. When both the flow performance and heat transfer performance are taken into account, the importance of the influence parameters ranks as follows: Reynolds number, pin-fin diameter, and pin-fin spacing. It also suggests that smaller pin-fin diameters and larger pin-fin spacing should be selected in the design stage based on the variation laws of integrated thermal-hydraulic performance. The results may provide valuable references and insights for the design of steam cooling structures within high-temperature turbine blade trailing edge channels in advanced gas turbines.