Sajjad Hussain

Mr. Sajjad Hussain

National University of Malaysia (UKM), 43600 UKM Bangi, Selangor, Malaysia
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 February 2022 in Metals
Verified
Journal Article
Open access
PDF file
Sajjad HussainSajjad Hussain
Sajjad Hussain
WGWan Aizon W. Ghopa
Wan Aizon W. Ghopa
SSSalvinder Singh Karam Singh
Salvinder Singh Karam Singh
Abdul Hadi AZMANAbdul Hadi AZMAN
Abdul Hadi AZMAN
Shahrum AbdullahShahrum Abdullah
Shahrum Abdullah
This paper aims to investigate the utilization of octet truss lattice structures in gas turbine blades to achieve weight reduction and improvement in vibration characteristics, which are desired for turbine blades to improve the efficiency and load capacity of turbines. A solid blade model using NACA 23012 airfoil was designed as reference. Three lattice-based blades were designed and manufactured via additive manufacturing by replacing the internal volume of solid blades with octet truss unit cells of variable strut thickness. Experimental and numerical vibration analyses were performed on the blades to establish their suitability for potential use in turbine blades. A maximum weight reduction of 24.91% was achieved. The natural frequencies of lattice blades were higher than those of solid blades. A stress reduction up to 38.6% and deformation reduction of up to 21.5% compared with solid blades were also observed. Both experimental and numerical results showed good agreement with a maximum difference of 3.94% in natural frequencies. Therefore, apart from being lightweight, octet-truss-lattice-based blades have excellent vibration characteristics and low stress levels, thereby making these blades ideal for enhancing the efficiency and durability of gas turbines.

14 July 2022 in Materials
Verified
Journal Article
Open access
PDF file
Sajjad HussainSajjad Hussain
Sajjad Hussain
WGWan Aizon W. Ghopa
Wan Aizon W. Ghopa
SSSalvinder Singh Karam Singh
Salvinder Singh Karam Singh
Abdul Hadi AZMANAbdul Hadi AZMAN
Abdul Hadi AZMAN
Shahrum AbdullahShahrum Abdullah
Shahrum Abdullah
HHHawa Hishamuddin
Hawa Hishamuddin
Vibration fatigue characteristics are critical for rotating machinery components such as turbine rotor blades. Lattice structures are gaining popularity in engineering applications due to their unique ability to reduce weight and improve the mechanical properties. This study is an experimental investigation of octet-truss lattice structure utilization in turbine rotor blades for weight reduction and to improve vibration fatigue characteristics. One completely solid and three lattice infilled blades with variable strut thickness were manufactured via additive manufacturing. Both free and forced experimental vibration analyses were performed on the blades to investigate their modal and vibration fatigue characteristics. The blades were subjected to random vibration using a vibration shaker. The response was measured using a triaxial accelerometer in terms of vibration acceleration time histories in the X, Y, and Z directions. Results indicate a weight reduction of up to 24.91% and enhancement in the first natural frequency of up to 5.29% were achieved using lattice infilled blades. The fatigue life of the blades was investigated using three frequency domain approaches, namely, Lalanne, Dirlik and narrow band. The fatigue life results indicate that the 0.25 mm lattice blade exhibits the highest fatigue life, while the solid blade exhibits the lowest fatigue life of all four blades. The fatigue life of the 0.25 mm lattice blade was 1822-, 1802-, and 1819- fold higher compared to that of the solid blade, using the Lalanne, Dirlik, and narrow-band approaches, respectively. These results can serve as the first step towards the utilization of lattice structures in turbine blades, with thermal analysis as the next step. Therefore, apart from being light weight, the octet-truss lattice infilled blades exhibited superior vibration fatigue characteristics to vibration loads, thereby making them a potential replacement for solid blades in turbine rotors.

1 January 2022
Verified
Book Chapter
Closed access
PDF file
Sajjad HussainSajjad Hussain
Sajjad Hussain
WGWan Aizon W. Ghopa
Wan Aizon W. Ghopa
SSSalvinder Singh
Salvinder Singh
AAAbdul Hadi Azman
Abdul Hadi Azman
SAShahrum Abdullah
Shahrum Abdullah
HKHafizan Kamaruddin
Hafizan Kamaruddin

26 June 2017
Verified
Conference Paper
Closed access
PDF file
IAImran Aziz
Imran Aziz
Sajjad HussainSajjad Hussain
Sajjad Hussain
WTWasim Tarar
Wasim Tarar
IAImran Akhtar
Imran Akhtar
High cycle fatigue (HCF) is the main cause of failure in rotating machinery especially in aircraft engines which results in the loss of human life as well as billions of dollars. More than 60 percent of aircraft accidents are related to High cycle fatigue. Major reason for HCF is vibratory stresses induced in the blades at resonance. Damping is needed to avoid vibratory stresses to reach the failure level. High speed rotating machinery has to pass through the resonance in order to reach the operational speed and chances of failure are high at resonance level. It is therefore required to suppress the vibrations at resonance level to avoid any damage to the structure. Application of coating to suppress vibrations is a current area of research. Various types of coatings have been studied recently. This includes plasma graded coatings, viscoelastic dampers, piezoelectric material damping, and magnetomechanical damping. In this research, the phenomenon of damping using a coating of nickel alloy on a steel beam is studied experimentally and numerically to reduce vibratory stresses by enhancing damping characteristics to avoid aircraft engine and rotating machinery failure. For this purpose, uncoated and nickel alloy coated steel beams are fabricated. The coating procedure was performed using plasma arc method. The beams were then mounted in a cantilevered position and bump and vibration shaker tests were conducted to determine the natural frequencies and mode shapes. One of the most important parameter to measure the damping of a system is the damping ratio. In order to determine the damping ratio, vibration analyzer mode was adjusted in time domain and beam was excited by using a hammer. The vibration analyzer showed the vibration decay as a function of time. Using that decay, damping ratio was calculated by using logarithmic decrement method. In order to investigate and compare the damping characteristics of un-coated and coated beams, forced response method was employed. In this method, beams were excited at 1st and 2nd bending mode natural frequencies using vibration shaker. Results were very encouraging and showed a significant improvement in damping characteristics. The experimental results were then endorsed by numerical results which were achieved by performing modal and forced response analysis using finite element analysis techniques.