Abdul Hadi AZMAN

Dr. Abdul Hadi AZMAN

Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2014 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
ASAsliah Seharing
Asliah Seharing
Abdul Hadi AZMANAbdul Hadi AZMAN
Abdul Hadi AZMAN
SAShahrum Abdullah
Shahrum Abdullah
This review analyses the design, mechanical behaviors, manufacturability, and application of gradient lattice structures manufactured via metallic additive manufacturing technology. By varying the design parameters such as cell size, strut length, and strut diameter of the unit cells in lattice structures, a gradient property is obtained to achieve different levels of functionalities and optimize strength-to-weight ratio characteristics. Gradient lattice structures offer variable densification and porosities; and can combine more than one type of unit cells with different topologies which results in different performances in mechanical behavior layer-by-layer compared to non-gradient lattice structures. Additive manufacturing techniques are capable of manufacturing complex lightweight parts such as uniform and gradient lattice structures and hence offer design freedom for engineers. Despite these advantages, additive manufacturing has its own unique drawbacks in manufacturing lattice structures. The rules and strategies in overcoming the constraints are discussed and recommendations for future work were proposed.

30 July 2022 in Progress in Additive Manufacturing
Verified
Journal Article
Open access
PDF file
MBMinhalina Ahmad Buhairi
Minhalina Ahmad Buhairi
Farhana  Mohd FoudziFarhana Mohd Foudzi
Farhana Mohd Foudzi
FJFathin Iliana Jamhari
Fathin Iliana Jamhari
ASAbu Bakar Sulong
Abu Bakar Sulong
NRNabilah Afiqah Mohd radzuan
Nabilah Afiqah Mohd radzuan
M.S.H. Al-FurjanM.S.H. Al-Furjan
M.S.H. Al-Furjan
Various laser powder bed fusion (LPBF) process parameters must be considered as they can independently affect the properties of end-product. However, many studies simply examine one or two LPBF process parameters. Laser power, scan speed, scan spacing, and layer height are the four primary LPBF process parameters that contribute to volumetric energy density (VED) used in LPBF. VED is often used as an optimization metric for LPBF process parameters, because it takes all four major parameters into consideration. Thus, this paper focuses on the effect of VED on the morphology and properties of part, and also discusses on the interrelationship between all four parameters. Common range used for each parameter is 70–400 W for laser power, 70–1800 mm/s for scan speed, 50–140 µm for scan spacing, and 20–50 µm for layer height. It can be seen as the VED increased, the microstructure of as-built titanium alloy Ti6Al4V components exhibited smaller α’ martensite size and larger columnar β grain. High VED can also reduce porosity and defect formation, which will help in increasing part density. The lowest surface roughness reported for LPBF Ti6Al4V is 4.91 µm. Meanwhile, the maximum microhardness obtained is 443 HV and the highest tensile strength achieved is 1400 MPa. The VED used for studies that obtained these results are in the range of 55–65 J/mm3. Thus, it can be concluded that the most suitable VED for LPBF printing of Ti6Al4V is around 55–65 J/mm3.

3 November 2019 in Processes
Verified
Journal Article
Open access
PDF file
RARahito
Rahito
DWD.A. Wahab
D.A. Wahab
Abdul Hadi AZMANAbdul Hadi AZMAN
Abdul Hadi AZMAN
Repair and restoration is an important step in remanufacturing as it ensures end-of-life products are returned to as-new condition before entering the subsequent life cycle. Currently, such processes are carried out manually by skilled workers. The advent of additive manufacturing (AM) has encouraged researchers to investigate its potential in automated repair and restoration, thus rendering it as a more effective method for remanufacturing. However, the application of this widespread technology for repair and restoration in remanufacturing is still new. This paper provides an overview of the principles and capabilities offered by the existing metal AM technology for object repair and restoration namely, direct energy deposition, powder bed fusion, and cold spray technology. Their applications in the repair and restoration of remanufacturable components are presented and discussed along with issues requiring attention from the perspectives of object design and process systems capabilities. The study provides a compilation of the challenges in AM repair and restoration, which primarily lie in the aspects of geometrical complexity, geometric dimensioning and tolerancing, material compatibility, and pre-processing requirements since it is critical for remanufacturing to restore end-of-life components to as new-condition. The paper concludes with suggestions for further works in AM restoration to enable product life cycle extension in the circular economy.

1 January 2020 in Additive Manufacturing
Verified
Journal Article
Open access
IFInigo Flores
Inigo Flores
NKNiklas Kretzschmar
Niklas Kretzschmar
Abdul Hadi AZMANAbdul Hadi AZMAN
Abdul Hadi AZMAN
SCSergei Chekurov
Sergei Chekurov
DPDavid B. Pedersen
David B. Pedersen
ACAtanu Chaudhuri
Atanu Chaudhuri

15 February 2022 in Metals
Verified
Journal Article
Open access
PDF file
Sajjad HussainSajjad Hussain
Sajjad Hussain
WGWan Aizon W. Ghopa
Wan Aizon W. Ghopa
SSSalvinder Singh Karam Singh
Salvinder Singh Karam Singh
Abdul Hadi AZMANAbdul Hadi AZMAN
Abdul Hadi AZMAN
Shahrum AbdullahShahrum Abdullah
Shahrum Abdullah
This paper aims to investigate the utilization of octet truss lattice structures in gas turbine blades to achieve weight reduction and improvement in vibration characteristics, which are desired for turbine blades to improve the efficiency and load capacity of turbines. A solid blade model using NACA 23012 airfoil was designed as reference. Three lattice-based blades were designed and manufactured via additive manufacturing by replacing the internal volume of solid blades with octet truss unit cells of variable strut thickness. Experimental and numerical vibration analyses were performed on the blades to establish their suitability for potential use in turbine blades. A maximum weight reduction of 24.91% was achieved. The natural frequencies of lattice blades were higher than those of solid blades. A stress reduction up to 38.6% and deformation reduction of up to 21.5% compared with solid blades were also observed. Both experimental and numerical results showed good agreement with a maximum difference of 3.94% in natural frequencies. Therefore, apart from being lightweight, octet-truss-lattice-based blades have excellent vibration characteristics and low stress levels, thereby making these blades ideal for enhancing the efficiency and durability of gas turbines.

29 April 2018 in Jurnal Teknologi (Sciences & Engineering)
Verified
Journal Article
Open access
PDF file
Abdul Hadi AZMANAbdul Hadi AZMAN
Abdul Hadi AZMAN
FVFrédéric Vignat
Frédéric Vignat
FVFrançois Villeneuve
François Villeneuve
Additive manufacturing has opened the door to the creation of lightweight lattice structures. However, present Computer-Aided Design (CAD) and Computer-Aided Engineering (CAE) software are unsuitable for these types of structures. The objective of this research is to examine the performances of current CAD and CAE software to design lattice structures and to demonstrate their limitations and propose requirements for future developments. A performance evaluation of a case study for lattice structure designs was conducted. The criteria used for the evaluation were CAD human-machine-interface, RAM consumption, data exchange between CAD, CAE and CAM tools and finite element analysis (FEA) duration and file sizes. The CAD tool was incapable of executing a repetition function for octet-truss lattice structures of 150 x 150 x 150 mm dimensions or larger and the software stopped working. For 70 × 70 × 70 mm octet-truss lattice structure, the FEA computation file size reached 36.6 GB. The CAD file size of a 200 x 200 x 200 mm octet-truss lattice structure reached nearly 290 MB. In conclusion, this study exposes the performance inadequacy of current CAD and CAE tools and CAD file formats to design lattice structures for additive manufacturing parts.