Nature has proven to be a valuable resource in inspiring the development of novel technologies. The field of biomimetics emerged centuries ago as scientists sought to understand the fundamental science behind the extraordinary properties of organisms in nature and applied the new science to mimic a desired property using various materials. Through evolution, living organisms have developed specialized surface coatings and chemistries with extraordinary properties such as the superhydrophobicity, which has been exploited to maintain structural integrity and for survival in harsh environments. The Lotus leaf is one of many examples which has inspired the fabrication of superhydrophobic surfaces. In this review, the fundamental science, supported by rigorous derivations from a thermodynamic perspective, is presented to explain the origin of superhydrophobicity. Based on theory, the interplay between surface morphology and chemistry is shown to influence surface wetting properties of materials. Various fabrication techniques to create superhydrophobic surfaces are also presented along with the corresponding advantages and/or disadvantages. Recent advances in the characterization techniques used to quantify the superhydrophobicity of surfaces is presented with respect to accuracy and sensitivity of the measurements. Challenges associated with the fabrication and characterization of superhydrophobic surfaces are also discussed.
18 July 2023 in Journal of Colloid and Interface Science
Carbon microspheres have been shown to reduce friction and surface wear at relatively low speeds and high applied loads (i.e., within the boundary lubrication regime). We hypothesize that in dilute colloidal lubricating systems there is an interplay between the size of the carbon microspheres and the lubrication gap size, which determines the dominant lubricating mechanism of the system. A 60 wt% aqueous glycerol solution was used as the base lubricant and compared to various carbon particle-based lubricant formulations ranging in particle concentrations from 0.05 to 0.30 vol%. The tribological properties of the various lubricant formulations were tested on a pin-on-disk tribometer. A simplified Stribeck plot was produced to understand the changing mechanism of lubrication over a wide range of conditions. The Stribeck curves show that the carbon microspheres assist lubrication by a rolling mechanism primarily in the boundary lubrication regime. A 0.20 vol% carbon-based lubricant formulation showed the best friction reduction compared to the base lubricant. Increasing speed increases the lubricating gap between the friction pair beyond the size of the particles, thereby nullifying the rolling mechanism of the particles. We introduce a modified specific film thickness parameter to determine the lubrication regime in a particle-lubricant system.
The application of low-density polyethylene (LDPE) has been confined to packaging applications due to its inadequate mechanical and tribological characteristics. We propose enhancing LDPE by integrating hard carbon spheres (CSs) to improve its strength, frictional characteristics, and wear resistance. LDPE/CS composites were created by blending LDPE with varying CS amounts (0.5–8 wt.%). Analysis using scanning electron microscopy and Raman spectroscopy confirmed CS presence in the LDPE matrix, with X-ray diffraction showing no microstructural changes post-blending. Thermal characterization exhibited notable improvements in thermal stability (~4%) and crystallinity (~7%). Mechanical properties such as hardness and Young’s modulus were improved by up to 4% and 24%, respectively. Tribological studies on different composite samples with varying surface roughness under various load and speed conditions revealed the critical role of surface roughness in reducing friction by decreasing real contact area and adhesive interactions between asperities. Increased load and speed amplified shear stress on asperities, possibly leading to deformation and failure. Notably, integrating CSs into LDPE, starting at 1 wt.%, effectively reduced friction and wear. The composite with the highest loading (8 wt.%) displayed the most significant tribological enhancement, achieving a remarkable 75% friction reduction and a substantial 78% wear reduction.