Globally, environmental challenges have been recognised as a matter of concern. Among these challenges are the reduced availability and quality of drinking water, and greenhouse gases that give rise to change in climate by entrapping heat, which result in respirational illness from smog and air pollution. Globally, the rate of demand for the use of freshwater has outgrown the rate of population increase; as the rapid growth in town and cities place a huge pressure on neighbouring water resources. Besides, the rapid growth in anthropogenic activities, such as the generation of energy and its conveyance, release carbon dioxide and other greenhouse gases, warming the planet. Polymer nanocomposite has played a significant role in finding solutions to current environmental problems. It has found interest due to its high potential for the reduction of gas emission, and elimination of pollutants, heavy metals, dyes, and oil in wastewater. The revolution of integrating developed novel nanomaterials such as nanoparticles, carbon nanotubes, nanofibers and activated carbon, in polymers, have instigated revitalizing and favourable inventive nanotechnologies for the treatment of wastewater and gas separation. This review discusses the effective employment of polymer nanocomposites for environmental utilizations. Polymer nanocomposite membranes for wastewater treatment and gas separation were reviewed together with their mechanisms. The use of polymer nanocomposites as an adsorbent for toxic metals ions removal and an adsorbent for dye removal were also discussed, together with the mechanism of the adsorption process. Patents in the utilization of innovative polymeric nanocomposite membranes for environmental utilizations were discussed.

Activated carbons were produced from coconut shells of tall and dwarf tree varieties. The activated carbon from the tall tree variety was initially synthesized using 1 M concentration of each of ZnCl₂, H₃PO₄, and KOH solutions. From the adsorptive tests conducted using methylene blue solution, the activated carbon produced with H₃PO₄gave the best absorbance and adsorptive performance. Coconut shells of dwarf tree variety were then obtained and treated with same mass of coconut shells of the tall tree variety using varied concentrations of the acid in order to determine whether the optimum concentration and temperature for producing carbon black from the coconut shells are distinct or similar for both varieties. The process was also modelled using the Differential Response Method (DRM) in order to determine the yields and adsorptive performances of the activated carbons by varying the carbonization temperature and concentration. The results from experiment and the developed mathematical model were both found to be in agreement giving the optimum concentration of phosphoric acid and pH for producing activated carbon to be 0.67 M and 2.07 for the tall tree variety and 1 M and 1.98 for the dwarf variety at optimum temperatures in the range of 450–575°C and 575°C, respectively.

Carbon capture has become a very important method for curbing the problems associated with the release of carbon dioxide into the atmosphere, which in turn has detrimental effects on the planet and its inhabitants. Ionic liquids and membrane separation have been explored in this review paper as effective means of capturing carbon dioxide. An innovative approach to CO₂ capture is the use of Ionic liquids (ILs) since they exhibit certain significant traits such as good stability (thermal, mechanical and chemical), inflammability and high absorptive capacities. Ionic liquids (ILs) are widely regarded as nontoxic substances. Viscosity and thermal degradation of ILs at temperatures slightly above 100 °C are the major disadvantages of ILs. Membrane separation is a technique used for the effective separation of substances by materials bearing holes in a continuous structure. Membrane technology has gained significant improvements, over the years. Several ILs and membrane systems were considered in this work. Their weaknesses, strengths, permeability, selectivity, operating conditions and carbon capture efficiencies, were all highlighted in order to gain a good perspective on ways by which the individual systems can be improved upon. The study considered several polymer-Ionic liquid hybrid materials as viable options for CO₂ capture from a post-combustion process. Different ILs were scrutinized for possible integration in membranes by taking full advantage of their individual properties and harnessing their tune-able characteristics in order to improve the overall carbon capture performance of the system. Several options for improving the mechanical, chemical, and thermal stabilities of the hybrid systems were considered including the use of cellulose acetate membrane, nanoparticles (graphene oxide powder) alongside potential ionic liquids. Doping membranes with ILs and nanoparticulates such as graphene oxide serves as a potential method for enhancing the CO₂ capture of membranes and this review provides several evidences that serve as proofs for this concept.