This research presents a novel approach to 28 impulse radio ultra-wideband (IR-UWB) transmission using pulse position modulation (PPM) over an analog radio-over-fiber (ARoF) link, investigating the impact of fiber-based fronthaul on the overall performance of the communication system. In this setup, an arbitrary waveform generator (AWG) is employed for PPM signal generation, while demodulation is performed with a commercial time-to-digital converter (TDC) based on an event timer. To enhance the reliability of transmitted reference PPM (TR-PPM) signals, the transmission system integrates Gray coding and Consultative Committee for Space Data Systems (CCSDS)-standard-compliant Reed-Solomon (RS) error correcting code (ECC). System performance was evaluated by transmitting pseudorandom binary sequences (PRBSs) and measuring the bit error ratio (BER) across a 5-m wireless link between two 20 gain horn (Ka-band) antennas, with and without a 20 single-mode optical fiber (SMF) link in transmitter side and ECC at the receiver side. The system achieved a BER of less than 8.17 × 10−7, using a time bin duration of 200 and a pulse duration of 100 , demonstrating robust performance and significant potential for space-to-ground telecommunication applications.
1 June 2022 in Electrical, Control and Communication Engineering
The paper is dedicated to the development of hardware and software components for the autonomous water quality monitoring system (WQMS) for fishing farms. The system can measure main water quality parameters, storing and processing data on the remote server. The LoRaWAN technological solutions and infrastructure are utilized, providing the optimal tradeoff between data transmission range and adaptive power consumption. The main implementation and exploitation issues are described, and the proposed solutions are provided.
OTFS, proposed for next-generation wireless communication systems such as 6G mobile networks, incorporates ISAC into DD-domain multiplexing, enabling simple detection of distance, velocity, and movement direction. This paper presents a SDR implementation of OTFS in an ARoF setup with wireless RF transmission. The main goal of this study is to validate and evaluate the implemented OTFS with static objects and to explore the quality of velocity and direction estimation in sensing scenarios involving moving objects. For the BER measurements, experiments were performed using a static object while varying the SDR transmitter power and introducing additional CFO. Experimental validation shows a minimum BER ≤ 5 × 10−7 with 0 errors per 2 × 106 bits. Data transmission at fractional Doppler yielded a BER ≈ 0.09, which is attributed to the use of a LMMSE channel estimator, that is not optimal for channels with fractional Doppler. Estimation of the velocity of a mobile object with an absolute velocity of m/s yielded a RMSE = 0.0839 m/s.
The energy efficiency of a communication system using pulse position modulation (PPM) can be increased by reducing the duration of the pulses transmitted over the communication channel to several tens of picoseconds. The employment of an event timer device as a time-to-digital converter (TDC) for demodulation allows the use of PPM with many pulse positions and achieves competitive data transfer speeds. However, along with several-picosecond accuracy of modern event timers, they require a pulse duration of several hundred picoseconds for precise detection. This research is devoted to developing passive techniques for precise pulse expansion from tens of picoseconds to hundreds of picoseconds. We propose two methods: the electrical method, which employs a microstrip low-pass filter (LPF), and the optical method, which uses fiber Bragg grating (FBG). This research offers a detailed analysis of distortion-free pulse expansion requirements, the design of prototypes meeting these requirements, and experimental design verification. Theoretical background, mathematical models, and results of experimental validation of the proposed pulse expansion methods within the laboratory transmitted reference pulse-position modulation (TR-PPM) communication system are provided.
This study presents the design and development, fabrication, and experimental testing of a four-circular-coil system capable of generating controlled, very low-frequency magnetic fields for biomedical applications. The system is tailored for use with a bioreactor cultivating mesenchymal stem cells, ensuring highly uniform magnetic fields within the area of interest (AOI). An asymptotic approach—the Multiple-Turn Thin-Wire Approximation (MTTWA)—was employed for fast calculations and modeling of multi-turn coil systems with massive windings. The MTTWA-calculated magnetic field distribution of the four-multi-turn coil system was verified with Ansys Maxwell simulations, showing good agreement. The coils and coil system were designed and fabricated, along with a prototype of the exposure system to validate both numerical modeling and simulation results, achieving magnetic field uniformity of at least 97% within the AOI. In the fabricated four-coil exposure setup, symmetric coils are connected in parallel with two separate amplifier-controlled outputs, enabling precise adjustment of field strength, uniformity, and intentional inhomogeneity for specialized experiments. An automated measurement system has been designed and fabricated to measure the magnetic field within the AOI volume with a spatial resolution of 1 mm.
Integrated sensing and communications (ISAC) is a key enabling technology for 6G networks, as it unifies radar sensing and data transmission within a shared infrastructure. Analog radio-over-fiber (ARoF) has emerged as a crucial technology for extending radar coverage and enabling distributed radar sensing. By incorporating pulse position modulation (PPM), it is possible to simultaneously measure the target’s range and transmit data, thereby increasing the energy efficiency of such systems. In this research, we present a novel ARoF-based ISAC-capable pulse radar system that features a custom-built PPM modulator employing a digital-to-time converter, and a high-accuracy time tagger as the demodulator, allowing for pulse time of arrival measurements with an root mean square accuracy up to 1.5 ps. The experimental results show a 5 Mbit/s data transmission along with a bit error ratio less than 5.86 × 10−7 at a 95% confidence level, using a PPM slot duration of 750 ps in an optical system featuring more than 40 km of single-mode optical fiber and a simultaneous range measurement with error less than 0.86 cm. In addition to ISAC exploration, the impact of fiber-induced chromatic dispersion on the PPM signal is studied, and the system is validated in an outdoor environment with a moving target.