The most common nondestructive weld inspection technique is X-rays and, since a few years ago, the ultrasound-based phased array. Their comparison has been done from the top view of both, with the result that the phased array is much more efficient in discovering flaws. From the last studies of the authors, a welding flaw can be three-dimensionally reconstructed from the sectorial phased array information. The same methodology is applied to compare quantitatively X-rays and phased array on 15 metal inert/active (MIG/MAG) welding specimens covering pores, slag intrusion and cracks. The results can be summarized in the correlation of the top views and in the correlation profiles between the X-ray top-view and the reconstructed top-view at the depths from phased array in the weld. The maximum correlation is the depth when the flaw in the X-ray looks like that in the phased array records at some depth, leading to an effective quantitative comparison of X-rays and phased array.
Weldment inspection is a critical process in the metal industry. It is first conducted visually, then manually and finally using instrumental techniques such as ultrasound. We made one hundred metal inert/active gas (MIG/MAG) weldments on plates of naval steel S275JR+N with no defects, and inducing pores, slag intrusion and cracks. With the objective of the three-dimensional reconstruction of the welding defects, phased array ultrasound inspections were carried out. Error-free weldment probes were used to provide the noise level. The results can be summarized as follows. (i) The top view obtained from the phased array provided no conclusive information about the welding defects. The values of the echo amplitudes were about 70 mV for pores and cracks, and greater than 150 mV for slag intrusion, all of which showed great variability. (ii) The sectional data did not lie at the same depths and they needed to be interpolated. (iii) The interpolated sectional views, or C-scans, allowed the computation of top views at any depth, as well as the three-dimensional reconstruction of the defects. (iv) The use of the simplest tool, consisting of the frequency histogram and its statistical moments, was sufficient to classify the defects. The mean echo amplitudes were 33 mV for pores, 72.16 mV for slag intrusion and 43.19 mV for cracks, with standard deviations of 8.84 mV, 24.64 mV and 12.39 mV, respectively. These findings represent the first step in the automatic classification of welding defects.
Rising sea levels and increasing storm wave heights are two clear indicators of climate change affecting coastal environments worldwide. Coastal cities and infrastructure are particularly vulnerable to these hazards, highlighting the need for accurate predictions and effective adaptation and resilience strategies to protect human lives and economic activities. This study focuses on the Andalusia coast of southern Spain, from Cádiz to Almería, analyzing twelve years of sea level and wave height records using an Extreme Value Analysis. A key challenge lies in selecting the most suitable statistical distribution for long-term predictions. To address this, we propose a modified application of the Cramér–Rao Lower Bound and compare it with the Akaike Information Criteria and the Bayesian Information Criteria. Our results indicate that sea level extremes generally follow a Gumbel distribution, while wave height extremes align more closely with the Fisher–Tippett I distribution. Additionally, a high-resolution digital elevation model of the Navantia Puerto Real shipyard, generated with LiDAR scanning, was used to identify flood-prone areas and assess potential operational impacts. This approach allows for the development of practical recommendations for enhancing infrastructure resilience. The main contribution of this work includes the estimation of extreme regimes for sea level and wave stations, a novel and more efficient application of the Cramér–Rao Lower Bound, a comparative analysis with Bayesian criteria, and providing recommendations to improve the resilience of shipyard operations.