This paper presents the first successful implementation of fully printed electronics for flexible and wearable smart multi-pad stimulation electrodes intended for use in medical, sports and lifestyle applications. The smart multi-pad electrodes with the electronic circuits based on organic electrochemical transistor (OECT)-based electronic circuits comprising the 3–8 decoder for active pad selection and high current throughput transistors for switching were produced by multi-layer screen printing. Devices with different architectures of switching transistors were tested in relevant conditions for electrical stimulation applications. An automated testbed with a configurable stimulation source and an adjustable human model equivalent circuit was developed for this purpose. Three of the proposed architectures successfully routed electrical currents of up to 15 mA at an output voltage of 30 V, while one was reliably performing even at 40 V. The presented results demonstrate feasibility of the concept in a range of conditions relevant to several applications of electrical stimulation.
Process automation, in general, enables the enhancement of productivity, product quality, and consistency alongside other production metrics. Liquor production on an industrial scale also follows the automation trend. However, small and medium producers lag with equipment modernization due to the high costs of industrial equipment. One of the important sensors in automation equipment for distilleries is the alcohol concentration sensor used for fraction separation, process automation, and supervision. This paper proposes a novel low-cost approach to alcohol concentration sensing by employing deep learning on the visual perception of traditional alcoholmeter. For purposes of the training model, dataset acquisition apparatus is developed and a large dataset of labeled images of alcoholmeter readings is acquired. The problem of reading alcohol concentration from an alcoholometer image is treated as a regression and classification problem. Performances of both regression and classification models were investigated with Resnet18 as an architecture of choice. Both models achieved satisfying performance metrics demonstrating the feasibility of the proposed approaches. The proposed system implemented on Raspberry Pi with a camera can be integrated into new distillation equipment. Additionally, it can be used for retrofitting existing equipment due to its non-invasive nature of reading. The scope of use can be further expanded to the reading of other types of analog instruments simply by retraining the model.