Sergio de la Rosa Silva

Mr. Sergio de la Rosa Silva

University of Cádiz
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 July 2021 in Polymers
Verified
Journal Article
Open access
PDF file
LRLucía Rodríguez-Parada
Lucía Rodríguez-Parada
SSSergio de la Rosa Silva
Sergio de la Rosa Silva
PAPedro Francisco Mayuet Ares
Pedro Francisco Mayuet Ares
The design of products with elastic properties is a paradigm for design engineers because the properties of the material define the correct functionality of the product. Fused filament fabrication (FFF) allows for the printing of products in thermoplastic polyurethanes (TPU). Therefore, it offers the ability to design elastic products with the freedom of forms that this technology allows and also with greater variation of elastic properties than with a conventional process. The internal structures and the variation in thickness that can be used facilitate the design of products with different elastic realities, producing variations in the elasticity of the product with the same material. This work studies the influence of the variation of internal density as a function of basic geometries in order to quantify the difference in elasticity produced on a product when it is designed. Likewise, a case study was carried out with the creation of a fully elastic computer keyboard printed in 3D. The specimens were subjected to compression to characterize the behavior of the structures. The tests showed that the elasticity varies depending on the orientation and geometry, with the highest compressive strength observed in the vertical orientation with 80% lightening. In addition, the internal lightening increases the elasticity progressively but not uniformly with respect to the solid geometry, and also the flat faces favour the reduction in elasticity. This study classifies the behavior of TPU with the aim of being applied to the design and manufacture of products with specific properties. In this work, a totally flexible and functional keyboard was designed, obtaining elasticity values that validate the study carried out.

22 April 2025 in Polymers
Verified
Journal Article
Open access
PDF file
SSSergio de la Rosa Silva
Sergio de la Rosa Silva
PAPedro Francisco Mayuet Ares
Pedro Francisco Mayuet Ares
LRLucía Rodríguez-Parada
Lucía Rodríguez-Parada
This study presents a comparative analysis of the influence of open-cell and closed-cell topologies on the manufacturing quality and resultant elasticity of 3D printed thermoplastic polyurethane (TPU) lattice structures. Lattice samples were designed based on various open-cell and closed-cell configurations, varying in unit cell size and fabricated using extrusion-based additive manufacturing (AM) techniques. A microscopic analysis was conducted to assess manufacturing defects, while mechanical compression tests were performed to characterize the elasticity of the samples. The correlation between the obtained results enabled the evaluation of the relationship between the manufacturability of lattice topologies and their stiffness. The findings reveal substantial differences in the manufacturability of the topologies, with open-cell structures exhibiting more pronounced defects. Additionally, the unit cell size and the resulting density of the samples were found to provide design advantages, as closed-cell topologies demonstrated superior load resistance. The accumulation of manufacturing defects was identified as a critical factor influencing deviations in stiffness measurements. This study establishes a foundational framework for lattice structural design, emphasizing the impact of cell topology and unit cell size on mechanical performance. The significance of this research lies in its contribution to the optimization of 3D printed TPU-based lattice structures, providing valuable insights for product design applications.

26 March 2024 in Rapid Prototyping Journal
Verified
Journal Article
Open access
PDF file
SSSergio de la Rosa Silva
Sergio de la Rosa Silva
PMPedro F. Mayuet
Pedro F. Mayuet
CSCátia S. Silva
Cátia S. Silva
ÁSÁlvaro M. Sampaio
Álvaro M. Sampaio
LRLucía Rodríguez-Parada
Lucía Rodríguez-Parada
Purpose: This papers aims to study lattice structures in terms of geometric variables, manufacturing variables and material-based variants and their correlation with compressive behaviour for their application in a methodology for the design and development of personalized elastic therapeutic products. Design/methodology/approach: Lattice samples were designed and manufactured using extrusion-based additive manufacturing technologies. Mechanical tests were carried out on lattice samples for elasticity characterization purposes. The relationships between sample stiffness and key geometric and manufacturing variables were subsequently used in the case study on the design of a pressure cushion model for validation purposes. Differentiated areas were established according to patient’s pressure map to subsequently make a correlation between the patient’s pressure needs and lattice samples stiffness. Findings: A substantial and wide variation in lattice compressive behaviour was found depending on the key study variables. The proposed methodology made it possible to efficiently identify and adjust the pressure of the different areas of the product to adapt them to the elastic needs of the patient. In this sense, the characterization lattice samples turned out to provide an effective and flexible response to the pressure requirements. Originality/value: This study provides a generalized foundation of lattice structural design and adjustable stiffness in application of pressure cushions, which can be equally applied to other designs with similar purposes. The relevance and contribution of this work lie in the proposed methodology for the design of personalized therapeutic products based on the use of individual lattice structures that function as independent customizable cells.

11 December 2021 in Polymers
Verified
Journal Article
Open access
PDF file
SSSergio de la Rosa Silva
Sergio de la Rosa Silva
PAPedro Francisco Mayuet Ares
Pedro Francisco Mayuet Ares
JSJosé Ramón Méndez Salgueiro
José Ramón Méndez Salgueiro
LRLucía Rodríguez-Parada
Lucía Rodríguez-Parada
This work focuses on evaluating and establishing the relationship of the influence of geometrical and manufacturing parameters in stiffness of additively manufactured TPU lattice structures. The contribution of this work resides in the creation of a methodology that focuses on characterizing the behavior of elastic lattice structures. Likewise, resides in the possibility of using the statistical treatment of results as a guide to find favorable possibilities within the range of parameters studied and to predict the behavior of the structures. In order to characterize their behavior, different types of specimens were designed and tested by finite element simulation of a compression process using Computer Aided Engineering (CAE) tools. The tests showed that the stiffness depends on the topology of the cells of the lattice structure. For structures with different cell topologies, it has been possible to obtain an increase in the reaction force against compression from 24.7 N to 397 N for the same manufacturing conditions. It was shown that other parameters with a defined influence on the stiffness of the structure were the temperature and the unit size of the cells, all due to the development of fusion mechanisms and the variation in the volume of material used, respectively.

21 October 2024 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
SSSergio de la Rosa Silva
Sergio de la Rosa Silva
LRLucía Rodríguez-Parada
Lucía Rodríguez-Parada
Moises Batista PonceMoises Batista Ponce
Moises Batista Ponce
PAPedro Francisco Mayuet Ares
Pedro Francisco Mayuet Ares
Carbon-fiber-reinforced polymer (CFRP) composites are widely used across industries due to their enhanced strength and stiffness properties. Fused deposition modeling (FDM) enables the cost-effective production of polymer samples, such as carbon-fiber-reinforced PLA (CFR-PLA). However, CFRP’s hardness and anisotropic nature present significant challenges in conventional machining, including rapid tool wear and thermal sensitivity. Consequently, abrasive water jet machining (AWJM) has proven to be an effective alternative for machining CFRP materials, offering benefits such as reduced tool wear, minimized thermal damage, and improved cutting quality. This study focuses on a comparative analysis of the effects of AWJM parameters on PLA and CFR-PLA samples, specifically to evaluate the influence of carbon fiber reinforcement on machining performance. The findings highlight the critical role of reinforcements in machining behavior. The results suggest that optimizing cutting parameters significantly reduces taper formation and improves machining accuracy. In particular, adjustments to process parameters resulted in lower taper angles and reduced surface roughness in the cutting zones of the CFR-PLA samples.

1 October 2021 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
SSSergio de la Rosa Silva
Sergio de la Rosa Silva
PMP F Mayuet
P F Mayuet
LRL Rodríguez
L Rodríguez
The advantages of AM (Additive Manufacturing) to manufacture complex geometries and custom flexible structures (shape, density, geometry etc.) provides the possibility to use the elastic properties of different materials to design elastic products with “customized” properties in order to obtain damping profiles that could be adapted to a specific energy absorbing application. One of the most widely used materials in the sense of the above is TPU (Thermoplastic Polyurethane). Several compression studies of porous TPU structures proven its effectiveness for shock absorption and have shown that the amount of energy absorbed is influenced by the density of the structure and the type of geometry used, among other parameters. This highlights the possibility of customizing the elastic behaviour of structures and could be implemented in rehabilitation programs which usually use elastic products with highly specific levels of resistance, harder or softer, to try not to strain injured muscles under dynamic loading conditions. However, a high percentage of the current research results is related to the development of support rehabilitation products under static loading conditions such as prostheses and orthotics. This paper aims to overview the current state of additive manufacturing capabilities in the development of rehabilitation products with customized elastic properties.