Shahriyar Safat Dipta

Dr. Shahriyar Safat Dipta

Engineering, UNSW Sydney, Sydney, New South Wales, Australia
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 September 2021 in Energy Technology
Verified
Journal Article
Closed access
PDF file
Shahriyar Safat DiptaShahriyar Safat Dipta
Shahriyar Safat Dipta
Ashraf UddinAshraf Uddin
Ashraf Uddin

1 April 2024 in Applied Physics Reviews
Verified
Journal Article
Open access
PDF file
Shahriyar Safat DiptaShahriyar Safat Dipta
Shahriyar Safat Dipta
Md. Arifur RahimMd. Arifur Rahim
Md. Arifur Rahim
Ashraf UddinAshraf Uddin
Ashraf Uddin
Lead halide perovskite solar cells (PSCs) have achieved remarkable efficiencies comparable to those of their established silicon counterparts at a very fast pace. Moreover, solution-processable facile technologies offer low-cost, low-temperature, scalable fabrication of these solar cells. Numerous studies have focused on improving the performance, stability, and processing of PSCs. However, potential lead toxicity and poor long-term stability impede their commercialization. In recent years, several studies have developed novel encapsulants for PSCs that can simultaneously improve stability and impede potential lead leakage. Although improvements have been made on both fronts, no solution to date could achieve a level of stability and leakage prevention that could result in a market breakthrough. Here, we analyze PSC encapsulation and lead leakage prevention techniques undertaken in recent years. While most of the related studies focused on improving either stability or toxicity, we note that both can be solved together with a suitable encapsulant that is impermeable to both moisture and Pb2+ ions. In addition, the lack of a unified standard stability testing protocol has led to stability testing under a variety of temperatures, humidities, and environmental conditions. Therefore, the urgency for a standard protocol for stability and lead toxicity testing cannot be overlooked.

11 June 2020 in Journal of the Optical Society of America B
Verified
Journal Article
Closed access
AGArnob Ghosh
Arnob Ghosh
Shahriyar Safat DiptaShahriyar Safat Dipta
Shahriyar Safat Dipta
SNSk Shafaat Saud Nikor
Sk Shafaat Saud Nikor
NSNazmus Saqib
Nazmus Saqib
ASArnob Saha
Arnob Saha
SSSk Saud
Sk Saud
As poor stability is the primary constraint for the commercialization of perovskite solar cells, improving stability has been the primary focus of recent research works regarding solar cells that make use of perovskite materials. Different metal oxide transport layers are being used with the aim of fabricating stable perovskite solar cells. A stable and efficient solar cell with both metal oxide transport layers (ZnO and N i O X ) and a perovskite (methyl ammonium lead iodide) absorber layer is simulated in this work, and a comparison of performance parameters is made with other transport layers from the literature. The issue of optimization regarding the thickness of the absorber layer and the doping concentration in the absorber and transport layers has been addressed, and the effect of defect concentration at the interface has been investigated. Optimum performance is achieved with an absorber layer of thickness 800 nm. Linear grading is also introduced in the absorber layer by varying the concentration of different halides, which increases the efficiency by approximately 8% owing to the increase in the short circuit current density.

10 November 2022 in Heliyon
Verified
Journal Article
Open access
Shahriyar Safat DiptaShahriyar Safat Dipta
Shahriyar Safat Dipta
Ashraf UddinAshraf Uddin
Ashraf Uddin
GCGavin Conibeer
Gavin Conibeer
Perovskite Solar Cells (PSCs) are the most promising candidates for low-cost and high-efficiency devices in the future photovoltaic market. PSCs are also used as the top cell in tandem devices with silicon bottom cells. However, research in PSCs is still at an early stage while racing towards a promising future. Along with experimental research, numerous simulation studies are conducted with PSCs aiming to analyze new materials and optimize their performance. Here, a wavelength-dependent model is implemented to account for the reflected part of irradiance from the cells, which is ignored in most SCAPS-1D based PSC simulated models. This model optimizes the MgF2 anti-reflective coating in SCAPS-1D simulation to allow maximum photons to pass inside the device. A simple structured PSC (MgF2/Glass/ITO/ZnO/CH3NH3PbI3/Spiro-OMeTAD/Au) is simulated and optimized optically as well as electrically with this model’s modified spectrum. The device was optimized for layer thickness, defects, and doping. Moreover, the effects of temperature and device resistances are discussed. The optimized device yields 21.62% power conversion efficiency, which can be further improved to reach over 25% through better processing schemes. Finally, the optimized device was compared with other devices having different ETL/absorber/HTL combinations and the pathway to achieving higher efficiencies was discussed. This article aims at improving the credibility of simulated devices by incorporating top surface reflection with electrical optimization.

18 June 2024 in Advanced Science
Verified
Journal Article
Open access
Shahriyar Safat DiptaShahriyar Safat Dipta
Shahriyar Safat Dipta
ACAndrew J Christofferson
Andrew J Christofferson
PKPriyank V. Kumar
Priyank V. Kumar
VKVarun Kundi
Varun Kundi
MHMuhammad Hanif
Muhammad Hanif
Md. Arifur RahimMd. Arifur Rahim
Md. Arifur Rahim
Lead (Pb) halide perovskite solar cells (PSCs) exhibit impressive power conversion efficiencies close to those of their silicon counterparts. However, they suffer from moisture instability and Pb safety concerns. Previous studies have endeavoured to address these issues independently, yielding minimal advancements. Here, a general nanoencapsulation platform using natural polyphenols is reported for Pb‐halide PSCs that simultaneously addresses both challenges. The polyphenol‐based encapsulant is solution‐processable, inexpensive (≈1.6 USD m−2), and requires only 5 min for the entire process, highlighting its potential scalability. The encapsulated devices with a power conversion efficiency of 20.7% retained up to 80% of their peak performance for 2000 h and up to 70% for 7000 h. Under simulated rainfall conditions, the encapsulant rich in catechol groups captures the Pb ions released from the degraded perovskites via coordination, keeping the Pb levels within the safe drinking water threshold of 15 ppb.

10 June 2024 in Molecules
Verified
Journal Article
Open access
PDF file
Shahriyar Safat DiptaShahriyar Safat Dipta
Shahriyar Safat Dipta
AHAshraful Hossain Howlader
Ashraful Hossain Howlader
WTWalia Binte Tarique
Walia Binte Tarique
Ashraf UddinAshraf Uddin
Ashraf Uddin
The solar energy market is predicted to be shared between Si solar cells and third-generation photovoltaics in the future. Perovskite solar cells (PSCs) show the greatest potential to capture a share there as a single junction or in tandem with silicon. Researchers worldwide are looking to optimize the composition of the perovskite film to achieve an optimal bandgap, performance, and stability. Traditional perovskites have a mixture of formamidinium and methyl ammonium as the A-site cation in their ABX3 structure. However, in recent times, the use of cesium and rubidium has become popular for making highly efficient PSCs. A thorough analysis of the performance and stability of double-, triple-, and quadruple-cation PSCs under different environmental conditions was performed in this study. The performance of the device and the films was analyzed by electrical measurements (J–V, dark J–V, EQE), scanning electron microscopy, atomic force microscopy, photoluminescence, and X-ray diffraction. The quadruple-cation device with the formula Cs0.07Rb0.03FA0.77MA0.13PbI2.8Br0.2 showed the highest power conversion efficiency (PCE) of 21.7%. However, this device had the least stability under all conditions. The triple-cation device with the formula Cs0.1FA0.6MA0.3PbI2.8Br0.2, with a slightly lower PCE (21.2%), was considerably more stable, resulting in about 30% more energy harvested than that using the other two devices during their life cycle.