The condition of railway infrastructure is currently assessed by track recording cars, wayside equipment, onboard monitoring techniques and visual inspections. These data sources deliver valuable information for infrastructure managers on the asset’s condition but are mostly carried out in time-based intervals. This paper examines the potential of fibre optic cables, which are already installed in cable troughs alongside railway tracks, to monitor railway infrastructure conditions. The sensing technique, known as distributed acoustic/vibration sensing (DAS/DVS), relies on the effect of Rayleigh scattering and transforms the optical fibre into an array of “virtual microphones” in the thousands. This sensing method has the ability to be used over long distances and thus provide information about the events taking place in the proximity of the monitored asset in real-time. This study outlines the potential of DAS for the identification of different track conditions and isolated track defects. The results are linked to asset data of the infrastructure manager to identify the root cause of the detected signal anomalies and pattern. A methodology such as this allows for condition-based and component-specific maintenance planning and execution and avoids the installation of additional sensors. DAS can pave the way toward a permanent and holistic assessment of railway tracks.
Condition assessment and maintenance planning of railway infrastructure is a prerequisite for safe and reliable train operation. As the loads are constantly increasing, condition assessment of the track must also be further developed. Existing methods can describe the condition of the track well in many cases, but they will reach their limits with faster deterioration processes and shorter time windows for inspection and maintenance, both associated with higher loads. This development can only be countered with an increased understanding of the system and the associated better planning of component specific measures. Among others, short-wave effects of the track need to be considered. The aim of this paper is to demonstrate the possibility of describing short-wave effects with an already existing data source. Insulated rail joints, welding joints, switch components, but also rail corrugation of different wavelengths and squat can be detected, evaluated and monitored by a measuring system based on optical distance meters. These assets and wear phenomena form essential parts of track asset management, but still are not described sufficiently by established methods. Although the so-called rail surface measurement system has been installed on the main Austrian measuring car for years, its full potential could not be exploited due to insufficient positioning accuracy. The method presented in this paper intends to change that. This allows for a holistic assessment of track condition when planning maintenance activities.
For future requirements, asset management of turnouts needs to rely on data-based assessment tools. These tools must enable the quantification of quality behaviour of turnouts and identify causes of poor behaviour. In this paper, we provide a toolbox addressing these requirements. We use track geometry as the main criterion for quality behaviour in combination with additional indicators, each associated with a different component, to understand turnout performance. The toolbox is applied to five similar turnouts to compare their performance. It is revealed that one of the turnouts performs significantly worse than the others. A deeper analysis can identify worn ballast in several areas of the turnout as the cause of poor performance. Problems in the ballast bed can be attributed to worn insulated rail joints as well as to stiffness changes in the transition areas of the turnout.
The positive effects of under sleeper pads have already been proven by track and laboratory tests worldwide. In Austria, padded concrete sleepers reduce track deterioration by 50 percent and have therefore been used as standard components since 2010. As the pads increase material costs, many infrastructure managers have discussed the idea of covering costs by reducing the ballast bed thickness. Technically, this approach (less ballast) is feasible, as the pads increase the track elasticity and protect the ballast. Further, pads lead to higher rail deflection and distribution of the load to more sleepers, and the stresses in sleepers are therefore relieved. Here, we compared Austrian test sections with padded and unpadded concrete sleepers and with a difference in the ballast bed thickness: standard thickness of 30 cm against 20 cm below the sleeper. Fractal analyses and standard deviations of the track’s longitudinal level provided information about the sections’ long-term track behaviour over 20 years. We found that the standard solution with 30 cm ballast performed better in the long term compared to 20 cm. Additionally, the test section with padded sleepers on a reduced ballast bed thickness showed a lower maintenance demand than the unpadded concrete sleeper track on a 30 cm ballast bed.
As track behavior varies in a wide range of service lives and maintenance demands must be specified. The Standard Element Approach provides a specification based on the most important boundary conditions influencing track behavior such as transport load, alignment, superstructure components as well as substructure qualities, and last but not least the functionality of the dewatering system. These parameters show several possible values. The mix of all of these parameter values describes tracks in the entire network. This clustering helps for decision making for strategic asset management: superstructure component use for different parameter sets, calculating average maintenance and renewal demands and thus the respective budgets for a sustainable track strategy avoiding or reducing backlogs. The Standard Element Approach works for all railway infrastructure assets, this chapter focuses on track in detail.
Today’s railway transport is built upon high-performance infrastructure. Cost-effective yet sustainable infrastructure presumes tracks with a precise and durable geometry. At ballasted tracks, the geometry is created and restored through tamping machines, which position the track panel and compact the ballast beneath the sleepers. It is commonly agreed that the ballast compaction plays an important role in the long-term stability of the track. Yet, there is no method available which allows a direct correlation between the compactness of the ballast and the stability of the track geometry. Available studies either model track behaviour without considering the bedding, or analyse ballast compactness locally while disregarding its influence on the track geometry. This paper presents a new methodology which establishes a relation between these two topics—ballast compaction during tamping and subsequent track behaviour. A state-of-the-art tamping machine has been equipped with an experimental measurement setup, constantly recording relevant data during every tamping process. These data can be used to derive an indication for the achieved compaction under every sleeper. Utilising the tamping machine’s internal measuring system for track geometry documentation, every tamping process (every sleeper) is assigned to the precise position along the track. The data set is merged and synchronised with regular track geometry measurements of the infrastructure manager. The result is a comprehensive data set which allows precise analyses between tamping machine measurements and track behaviour. This data set provides the foundation for future research, aiming towards a better understanding of the tamping process and its influence on the quality and durability of the established track geometry.