Tracked vehicles are integral for maneuvering diverse terrains, with hybrid propulsion systems offering potential benefits in terms of fuel efficiency and performance. However, research in hybrid electric tracked vehicles remains limited, thus necessitating a comprehensive analysis to maximize their advantages. This study presents a numerical analysis focusing on optimizing hybridization in speed-coupled parallel hybrid electric powertrains for tracked vehicles. A dynamic programming algorithm and custom drive cycle are utilized to determine optimal hybridization factors and assess parameter sensitivities. The study reveals that a hybridization factor of 0.48 is optimal for speed-coupled parallel configurations. Furthermore, the sensitivity analysis underscores the substantial impact of factors such as the engine displacement and bore-to-stroke ratio on the fuel economy, with a 10% change in these parameters potentially influencing the fuel economy by up to 2%, thus emphasizing the importance of thorough consideration during powertrain sizing. Parallel hybrid configurations exhibit considerable potential for tracked vehicles, thus highlighting the viability of choosing them over series configurations.
All recent technological developments in the field of power distribution in hybrid electric tracked vehicles are often hard to apply and carry high computational burden which makes them impractical for real-time applications. In this paper, a novel control strategy is proposed for parallel hybrid electric tracked vehicle based on robust and easy to implement thermostat strategy with added merits of power follower control strategy (PFCS). The goal of the control strategy is enhanced fuel economy. Serbian infantry fighting vehicle BVP M80-A is chosen as the reference vehicle. For the purpose of validation, a backward-looking, high fidelity model is created in Simulink environment. Investigation of the results indicates that the proposed control strategy offers 12.8% better fuel economy while effectively maintaining battery state of charge (SOC). Even better results (23.2%) were achieved applying the proposed strategy to a model with an additional generator. It is concluded that further improvements can be made with combined sizing and control optimization.
This paper presents a systematically derived theoretical model for the motion of tracked vehicles, encompassing various scenarios such as soft terrain and slopes. The model considers all the resistances encountered by tracked vehicles, including track-terrain interaction, grade and air resistance, centrifugal force, inertial forces, and turning resistance. The heading angle determines the geometrical orientation of the vehicle on the slope. A MATLAB model of tracked vehicle general motion was established based on theoretical discussions. The paper discusses the steering performance of tracked vehicles on slopes of different inclinations. A simulation of steering with different turning radiuses was also presented. It is shown that the proposed model can be used for predicting and evaluating the steering performance of tracked vehicles with adequate accuracy. Furthermore, due to its high computational efficiency, the proposed model can be utilized for power demand modeling in research on the hybridization or electrification of tracked vehicles.
Introduction/purpose: The paper presents a systematic approach to the development of a series hybrid electric tracked vehicle (HETV) including powertrain sizing and adequate energy management strategy (EMS) selection. Methods: Powertrain elements were sized considering key performance requirements. Three energy management strategies were proposed: Thermostat Control Strategy (TCS), Power Follower Control Strategy (PFCS), and Optimal Power Source Strategy (OPSS). The evaluation of the powertrain configuration and the three proposed EMSs was performed in the Simulink environment using a driving cycle containing significant acceleration, braking and steering. Results: The results showed that the OPSS proved to be the best due to increased fuel economy and a low battery state of charge (SOC) variation. Compared to the previous research of the same vehicle with a parallel hybrid configuration, significantly better results were achieved. The investigation of the results indicates that the proposed powertrain and control strategy offer 53.79% better fuel economy which indicates that the powertrain sizing was properly performed. Conclusions: The results of this work are of great importance for understanding the effect of proper powertrain sizing on fuel economy. Compared to the reference vehicle, the proposed configuration achieves significant improvement, most of which is attributed to adequate sizing. The OPSS proved to be the best strategy, thus confirming the theoretical hypothesis. The series hybrid configuration with the OPSS as the EMS proved to be a major candidate for use in HETVs.
This paper presents a multi-objective optimization framework for improving internal combustion engine performance in hybrid electric vehicles, specifically targeting the minimization of fuel consumption and emissions (CO, NOx, HC, PM). The proposed method integrates normalized objective functions with weighted factors to develop a unified performance index, facilitating the simultaneous optimization of multiple conflicting objectives. Utilizing the NSGA-II algorithm, a diverse set of Pareto optimal points is generated, each representing different trade-offs between the objectives. The study?s results demonstrate significant improvements in engine performance through the application of the unified internal combustion engine operation map, showcasing a notable reduction in emissions with only a slight increase in fuel consumption. The methodology was validated via MATLAB simulations on two case studies involving parallel and series hybrid electric vehicles, employing a custom synthesized drive cycle for energy management strategy evaluation. The unified map enabled real-time control and efficiency improvements by balancing different emission parameters, thus optimizing internal combustion engine operation across various conditions.
Introduction: Hybrid technology has been successfully incorporated into the industry of passenger and commercial vehicles. Driven by the success and benefits that hybrid technology brings, many defense organizations around the world invest in the development of hybrid technology for combat vehicles and develop prototypes of tracked combat vehicles which have lower fuel consumption, better performance, better exhaust emission, and additional onboard electric power. However, various technical challenges must be resolved before it comes to the introduction of hybrid tracked combat vehicles in operational use. Several successful tests of prototypes have been conducted so far, but there are still restrictions on key technologies such as electric motors, electronics, and storage of electricity. In such conditions, where finance is limited, mistakes cannot be allowed nor spending a lot of resources on planning, building prototypes, and testing. Method: Therefore, it is clever to run the simulation software with which it is possible to examine various parameters in simulated conditions which more or less mimic real operating conditions. This paper aims to show one of possible solutions concerning the selection of appropriate technologies of hybrid drive, to propose a system solution for a hybrid BVP M80A, and to display a simulation hybrid drive model and the results obtained from the model devised in Simulink. Results: The results obtained by the simulation show that the proposed hybrid drive solution provides better performance while retaining key drivetrain elements of the vehicle. Conclusion: Only turning parameters are considered during the simulation but it is clear that the hybrid drivertrain has advantages related to straightline motion as well. Also, sound projections about the drivetrain performance and control can be made with the use of the proposed model.