Environmental pollution is a serious threat to human health and the natural environment, and it has aroused widespread concern. One of the most effective processes in the removal of pollutants from wastewater is the Fenton reaction. This process is based on the production of highly reactive •OH radicals due to the rapid reaction between Iron ions and hydrogen peroxide under acidic conditions. The hydroxyl radical has a high oxidation potential of E°(•OH/H2O) = 2.8 V/SHE at acidic pH, so they are extremely reactive and non-selective oxidizing agent towards organic contaminants in wastewater. In order to avoid the drawbacks of a standard Fenton reaction, a photo Fenton reaction has been tested working at neutral pH in water in the removal of refractory pollutants. For the first time, a heterogeneous system was experimented, impregnating porous metakaolin-based geopolymers, obtained by using hydrogen peroxide and vegetable oil in different ratios, as foaming agents, with iron working as photocatalyst. The dirty wastewater as scrubber water (SCRW) and liquid fraction of digestate (LFD) were tested obtaining 40-90% abatement of Total Carbon Content.
6 December 2024 in Case Studies in Chemical and Environmental Engineering
In this study, olive mill leaves (OMLs), a waste generated during the olive cleaning at the mill, were used as an adsorbent for removing methylene blue (MB) from aqueous solution. An Olive Leaf-based Adsorbent (OLA) was prepared from OMLs with minimal processing. The maximum adsorption capacity experimentally measured for OLA was qe = 12.8 mg∙g−1. The adsorption of MB by OLA, primarily governed by electrostatic attraction, pore diffusion and weak interactions with functional groups of the leaves, is well described by the Koble–Corrigan isotherm model and pseudo-second-order kinetic model. The performance of OLA under practical environmental conditions, such as in synthetic wastewater, remained unchanged compared to tests carried out in ideal conditions. The possibility of regenerating OLA with methanol, HCl and NaCl solutions was demonstrated, allowing the material to be reused for at least three cycles with unchanged performance. A life cycle assessment was conducted to compare the impacts of OLA production with those of activated carbon, a benchmark for adsorbent materials. Overall, despite its moderate adsorptive performance, OLA stands out as a highly sustainable material for dye removal from polluted waters, owing to its exceptional cost-effectiveness, reusability, and minimal environmental impact.
The large volumes of lignocellulosic residues generated by the paper, wood, and agri-food sectors represent a valuable renewable resource for the sustainable production of chemicals, energy, and bio-based materials. This study explores the valorization of wheat bran, which can be employed in the production of cellulose-based materials through molding processes using sustainable chemicals, thereby valorizing substrates no longer suitable for food applications. The formulations were optimized using eco-compatible additives and characterized by thermal, spectroscopic, rheological, wettability, and morphological analyses. Manual syringe extrudability and preliminary shape retention were experimentally verified for both WBd_B1X7 and WBC_B1X7. This work proposes a low-impact, circular supply chain for cellulose-based polymeric materials, integrating waste-derived raw materials, environmentally friendly processes and life cycle assessment to enable the sustainable production of functional materials. Compared with the WBd preparation route, the WBC route reduced the investigated environmental impacts by approximately 60–80%, while providing a formulation with rheological properties suitable for extrusion-based deposition.
Herein, we report a fully bio‐based, metal‐free photocatalytic protocol for the aerobic oxidation of aryl‐ and alkyl‐methanamines to imines under blue‐light irradiation. This transformation leverages curcumin, a naturally abundant and renewable polyphenol, as an efficient visible‐light photosensitizer and 2‐methyltetrahydrofuran (2‐MeTHF), a biomass‐derived solvent, establishing a sustainable catalytic system composed entirely of organic, bio‐derived components. The reaction proceeds efficiently at room temperature using molecular oxygen as the sole terminal oxidant, strictly avoiding transition metals, stoichiometric oxidants, and hazardous additives. A broad range of benzylic and aliphatic amines is converted to the corresponding imines in good to excellent yields (up to 98%), demonstrating the generality and practicality of the protocol. Comprehensive mechanistic investigations—including light on/off experiments, oxygen‐dependence studies, radical trapping, Stern–Volmer fluorescence quenching studies and Hammett analysis—support a sensitizer‐controlled aerobic photocatalytic pathway involving photoinduced electron transfer and oxygen‐mediated catalyst regeneration via superoxide radical anions. This work highlights the efficacy of natural pigments in driving high‐efficiency, sustainable organic transformations.