Stephen Lars Dorn

Mr. Stephen Lars Dorn

University of Münster, Münster, North Rhine-Westphalia, Germany
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
SHStine Eriksen Hammer
Stine Eriksen Hammer
SDStephen Lars Dorn
Stephen Lars Dorn
EDEmmanuel Dartey
Emmanuel Dartey
BBBalázs Berlinger
Balázs Berlinger
YTYngvar Thomassen
Yngvar Thomassen
DEDag G. Ellingsen
Dag G. Ellingsen
Electronic repair workers may be exposed to lead, mercury, cadmium and other elements including rare earth elements used in electronic equipment. In this study, repair work took place in small repair shops where, e.g., televisions, radios, video players, compact discs and computers were repaired. Personal full-shift air samples of particulate matter were collected among 64 electronic repair workers in Kumasi (Ghana) and analysed for 29 elements by inductively coupled plasma mass spectrometry. Results showed that air concentrations of all elements were low. The highest air concentration was measured for iron with a geometric mean concentration and geometric standard deviation of 6.3 ± 0.001 µg/m3. The corresponding concentration of Pb and Hg were 157 ± 3 ng/m3 and 0.2 ± 2.7 ng/m3, respectively. The cerium concentration of 5 ± 2 ng/m3 was the highest among the rare earth elements. Source apportionment with ranked principal component analysis indicated that 63% of the variance could be explained by the repair and soldering of electronic components such as batteries, magnets, displays and printed circuit boards. An association between concentrations of lead in the workroom air and lead in whole blood was found (Pearson’s correlation coefficient r = 0.42, p < 0.001). There was, however, no statistically significant difference between whole blood lead concentrations in the workers and references indicating that lead did not exclusively originate from occupational exposure.

22 September 2026 in Communications Chemistry
Verified
Journal Article
Open access
PDF file
SDStephen Lars Dorn
Stephen Lars Dorn
JKJ. Kauling
J. Kauling
MBM. Börner
M. Börner
MWMartin Winter
Martin Winter
SWSimon Wiemers-Meyer
Simon Wiemers-Meyer
Sascha NowakSascha Nowak
Sascha Nowak
A high amount of energy needed for the production of lithium-ion batteries is used for the drying and solvent recovery of N -methyl-2-pyrrolidone (NMP) in electrodes with polyvinylidene fluoride-based binder (PVdF) systems. Therefore, controlling the amount of used solvent as well as developing efficient drying procedures is of major importance. Furthermore, the drying process and solid content of the electrode paste directly affect the battery performance due to the risk of transport of the binder towards the electrode surface. This work focuses on an analytical approach for rapidly and reliably assessing the degree of this migration by measuring the fluorine distribution via glow discharge-sector field-mass spectrometry (GD-SF-MS). A sample with notably more binder migration based on preliminary cross-section imaging via scanning electron microscopy combined with energy-dispersive X-ray spectroscopy and a reference sample with no visualized binder migration were evaluated, with the former displaying a severely elevated degree of binder migration over the reference based on GD-SF-MS analysis. The developed method could also be applicable to electrodes based on sodium carboxymethyl cellulose (Na-CMC) binders by investigating the Na distribution instead.

4 May 2026 in Research Square
Verified
Preprint
Open access
Sascha NowakSascha Nowak
Sascha Nowak
SDStephen Lars Dorn
Stephen Lars Dorn
JKJohanna Kauling
Johanna Kauling
MBMarkus Börner
Markus Börner
MWMartin Winter
Martin Winter
SWSimon Wiemers-Meyer
Simon Wiemers-Meyer
A high amount of energy needed for the production of lithium ion batteries is used for the drying and solvent recovery of N -methyl-2-pyrrolidone (NMP) in electrodes with polyvinylidene fluoride-based binder (PVdF) systems. Therefore, controlling the amount of used solvent as well as developing efficient drying procedures is of major importance. Furthermore, the drying process and solid content of the electrode paste directly affect the battery performance due to the risk of transport of the binder towards the electrode surface. This work focuses on an analytical approach for rapidly and reliably assessing the degree of this migration by measuring the fluorine distribution via glow discharge-sector field-mass spectrometry (GD-SF-MS). A sample with notably more binder migration based on preliminary cross-section imaging via scanning electron microscopy combined with energy-dispersive X-ray spectroscopy and a reference sample with no visualized binder migration were evaluated, with the former displaying a severely elevated degree of binder migration over the reference based on GD-SF-MS analysis. The developed method could also be applicable to electrodes based on sodium carboxymethyl cellulose (Na-CMC) binders by investigating the Na distribution instead.

18 September 2026 in Advanced Energy and Sustainability Research
Verified
Journal Article
Open access
PDF file
SASimon Albers
Simon Albers
JTJens Timmermann
Jens Timmermann
MHMarcel Heidbuechel
Marcel Heidbuechel
SDStephen Lars Dorn
Stephen Lars Dorn
SWStefan van Wickeren
Stefan van Wickeren
JKJohannes Kasnatscheew
Johannes Kasnatscheew
Aqueous processing of conventional Ni‐rich layered oxide cathodes (here LiNi 0.83 Co 0.12 Mn 0.05 O 2 , NCM) can be a sustainable alternative to conventional organic solvent‐based processing. However, the LiOH‐based native surface layer of NCM dissolves in water and increases pH of the electrode paste, which can cause Al corrosion after slurry coating on the current collector. In contrast, a decreased pH via, e.g., acid addition increases risk of NCM dissolution. Here, this dilemma is partly circumvented via a decreased acid exposure, i.e., by adding H 2 SO 4 directly before the slurry coating, which also yields the literature‐known Li 2 SO 4 surface layer on final NCM. The mechanism of this beneficial measure is further investigated by systematically varying the cations of the sulfates as slurry additives. Without these processing additives, the recrystallization of LiOH in course of drying is concluded to deposit as inhomogeneous agglomerates, which increases content of detrimental crystal water. The addition of Li 2 SO 4 , Na 2 SO 4 , or MgSO 4 as slurry additives—contrary to sulfates with, e.g., Ni 2+ , Co 2+ , Mn 2+ , Al 3+ —are shown to suppress the detrimental LiOH agglomerates as these cations are better soluble with OH − and can effectively interfere with the detrimental LiOH recrystallization process in the final, i.e., almost solvent‐free, drying stage within the cathode composite.

10 October 2026 in Advanced Energy and Sustainability Research
Verified
Journal Article
Open access
PDF file
SASimon Albers
Simon Albers
JTJens Timmermann
Jens Timmermann
MHMarcel Heidbuechel
Marcel Heidbuechel
SDStephen Lars Dorn
Stephen Lars Dorn
SWStefan van Wickeren
Stefan van Wickeren
JKJohannes Kasnatscheew
Johannes Kasnatscheew
Aqueous Processing of Ni-Rich Layered Oxides