Sumit Mahajan

Dr. Sumit Mahajan

Mechanical Engineering & Design, Jaypee Institute of Information Technology, Noida, India
orcid
Assistant Professor (Senior Grade)

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2012 in Procedia Chemistry
Verified
Journal Article
Open access
BSB. Sharma
B. Sharma
Sumit MahajanSumit Mahajan
Sumit Mahajan
RCR. Chhibber
R. Chhibber
RMR. Mehta
R. Mehta
Polymer composites have been the mainstay of high-performance structural materials, but these materials are inherently sensitive to environmental factors such as temperature, exposure to liquids, gases, electrical fields and radiation, which significantly affects their useful life. Addition of layered silicate nanofillers in the polymer matrix has led to improvements in the elastic moduli, strength, heat resistance, decreased gas permeability and flammability. In the present work epoxy modified with Cloisite 30 B̈ nanoclay (at 1, 3 and 5 wt% of resin) and E-glass unidirectional fibers are used to prepare fiber reinforced nanocomposites using hand lay-up method. The nanocomposites have been characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). XRD results show that the interlayer spacing between the clay platelets increased significantly indicating that the polymer is able to intercalate between the clay layers. The mechanical properties are measured by carrying out tensile, hardness and flexural tests and values are compared with those found for fiber reinforced neat epoxy composites. The tests show that an addition of nano-clay up to 3 wt% increases tensile strength and micro-hardness and there is a decrease in values with further clay addition up to 5 wt%. The flexural strength increased significantly with clay loading and the highest value is observed for specimens with 5 wt% of clay. Further, durability studies on nanocomposites have been performed in water and NaOH baths under accelerated hygrothermal conditions. During the exposure it is observed that the degradation in NaOH environment is more severe than in water

1 May 2019 in Engineering Failure Analysis
Verified
Journal Article
Closed access
Sumit MahajanSumit Mahajan
Sumit Mahajan
RCRahul Chhibber
Rahul Chhibber


1 February 2021 in Materials Letters
Verified
Journal Article
Closed access
WKWaris Nawaz Khan
Waris Nawaz Khan
Sumit MahajanSumit Mahajan
Sumit Mahajan
RCRahul Chhibber
Rahul Chhibber

27 April 2020 in Materials and Manufacturing Processes
Verified
Journal Article
Closed access
Sumit MahajanSumit Mahajan
Sumit Mahajan
RCRahul Chhibber
Rahul Chhibber
This article is an attempt to develop Ni-based shielded metal arc welding electrodes to join SS304L austenitic stainless steel to P91 martensitic steel used in power plant applications. Nickel-based electrodes were prepared using a mixture design approach. Dissimilar welds of SS304L/P91 were fabricated using Nickel-based laboratory-developed electrodes and commercially available electrode (ENiCrFe-3). A comparison was drawn between the weld characteristics of commercial and laboratory-developed electrodes. Experimentation was performed to evaluate the microstructural changes and mechanical characterization which includes hardness profile, tensile strength, the impact strength of the base materials, as well as dissimilar welds. Welds fabricated with a laboratory-developed electrode possesses better weld quality and mechanical characteristics. A higher amount of Ni and Cr was observed in the laboratory developed electrodes as compared to the commercial electrode.

30 July 2025 in Environmental Progress & Sustainable Energy
Verified
Journal Article
Closed access
SBSuraj Bhan
Suraj Bhan
SKSaket Kumar
Saket Kumar
RGRaghvendra Gautam
Raghvendra Gautam
PYPrem Shankar Yadav
Prem Shankar Yadav
GGGirish Dutt Gautam
Girish Dutt Gautam
Sumit MahajanSumit Mahajan
Sumit Mahajan