Electrochemical biosensors have attracted a tremendous attention for many researchers recently due to its facile synthesis process, tunability easiness by tailoring the material properties or composition, and wide range of biological analyte types detection. To obtain an excellent electrochemical biosensor performance, a material that facilitates fast electron transfer, large surface area, excellent electrocatalytic activity, and abundant available sites for bioconjugation is immensely needed. Metal-organic frameworks in the two-dimensional form (2D MOFs) provide all of the criteria needed as the sensing material for electrochemical biosensors application. However, the design and preparation of 2D MOFs, which have high stability and sensitivity as well as good selectivity for biological analyte detection, is still quite challenging. This review provides the recent studies and development of 2D MOFs as electrochemical biosensor. A detailed discussion about 2D MOFs structures, their synthesis strategy and control, 2D MOFs materials in electrochemical biosensor application, and the future challenges is thoroughly explained in this review. Hopefully, this review will also provide a new inspiration to advance future studies of 2D MOFs materials development as electrochemical biosensor.
Present-day science indicates that developing sensors with excellent sensitivity and selectivity for detecting early signs of diseases is highly desirable. Electrochemical sensors offer a method for detecting diseases that are simpler, faster, and more accurate than conventional laboratory analysis methods. Primarily, exploiting non-noble-metal nanomaterials with excellent conductivity and large surface area is still an area of active research due to its highly sensitive and selective catalysts for electrochemical detection in enzyme-free sensors. In this research, we successfully fabricate Metal-Organic Framework (MOF) FeBDC-derived Fe3O4 for non-enzymatic electrochemical detection of glucose. FeBDC synthesis was carried out using the solvothermal method. FeCl2.4H2O and Benzene-1,4-dicarboxylic acid (H2BDC) are used as precursors to form FeBDC. The materials were further characterized utilizing X-ray Powder Diffraction (XRD), Scanning Electron Microscopy (SEM), and Fourier-Transform Infrared Spectroscopy (FTIR). The resulting MOF yields good crystallinity and micro-rod like morphology. Electrochemical properties were tested using Cyclic Voltammetry (CV) and Differential Pulse Voltammetry (DPV) with a 0.1 M of Phosphate Buffer Saline (PBS pH 7.4) solution as the supporting electrolyte. The measurement results show the reduction and oxidation peaks in the CV curve of FeBDC, as well as Fe3O4. Pyrolysis of FeBDC to Fe3O4 increases the peak of oxidation and reduction currents. The Fe3O4 sample obtained has a sensitivity of 4.67 µA mM−1.cm−2, a linear range between 0.0 to 9.0 mM, and a glucose detection limit of 15.70 µM.
The development of non-noble-metal sensing material for sensitive and selective detection of uric acid with a simple material synthesis technique has not been frequently reported in recent years. Taking advantage of the unique properties of highly porous materials of Metal-Organic Frameworks, which incomparable in their structural diversity and tunability as well as their range of chemical and physical properties, open up a chance for developing novel nanomaterial for electrochemical sensor applications. In this paper, we evaluated MOF-71 as a sensing material on a glassy carbon electrode (GCE) in a three-electrode system for electrochemical detection of uric acid. The MOF-71 was synthesized by a simple solvothermal method. Its structural characteristics that are examined by scanning electron microscopy and X-ray diffraction confirmed the successful formation of MOF-71. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) analysis showed the successful uric acid detection in a phosphate buffer solution and showed good electrochemical catalytic activity toward uric acid. DPV was selected for the determination of uric acid with a sensitivity of 0.4811 mA.mM-1.cm-2, the detection range of 50.0-1000 μM, and detection limit of 15.61 μM at an S/N = 3.
6 January 2021 in Journal of the Electrochemical Society
Magnetite (Fe 3 O 4 ) nanostructures and their modifications with other materials show proper characteristics to be implemented as a sensing material. This paper provides a brief review of the application of the Fe 3 O 4 nanostructures and their modifications as sensitive material for pollutant gas sensors. Several studies were highlighted to explain the past-to-present progress of materials development. Various synthesis procedures of the materials were also clearly explained. The application of pure Fe 3 O 4 nanostructures and their modification as sensitive materials in gas sensor devices to detect toxic gases is the main section of this paper. Last, the future prospects section summarized the materials’ development and provided a suggestion for future development.
1 February 2021 in IOP Conference Series: Materials Science and Engineering
In this work, a metal-organic framework (MOF) based on cobalt was decorated with graphene and used as a sensing material for glucose determination with electrochemical principles. The selection of Co-MOF material is based on its porous nature, large surface area, and excellent electrochemical properties. The combination of Co-MOF with graphene (high conductivity) effectively increased the electrochemical sensor current. The fabricated composite owned the good crystallinity with graphene particles attached to the Co-MOF surface. The biosensing performance was evaluated by cyclic voltammetry (CV) with 0.1 M NaOH solution as the bolstering electrolyte. The electrochemical measurement indicated that the prepared materials possessed a well-moved transfer electron between the electrode surface and electrolyte solution. The Co-BDC-3Gr sample obtained the best electrochemical performance with the lowest limit of detection (LOD) of 5.39 μM and the highest sensitivity of 100.49 μA mM-1 cm-2. The selectivity test of the modified Co-MOF was done by comparing the response with other compounds such as dopamine, uric acid, and NaCl. The acquired biosensor had excellent stability, with 93% of the initial response after 30 days of storage.