Ahu Ece Hartavi Karcı

Mr. Ahu Ece Hartavi Karcı


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 October 2017 in Energies
Verified
Journal Article
Open access
PDF file
FVFabio Vacca
Fabio Vacca
SPStefano De pinto
Stefano De pinto
AKAhu Ece Hartavi Karcı
Ahu Ece Hartavi Karcı
Patrick GruberPatrick Gruber
Patrick Gruber
FVFabio Viotto
Fabio Viotto
Aldo SorniottiAldo Sorniotti
Aldo Sorniotti
The main benefits of dual clutch transmissions (DCTs) are: (i) a higher energy efficiency than automatic transmission systems with torque converters; and (ii) the capability to fill the torque gap during gear shifts to allow seamless longitudinal acceleration profiles. Therefore, DCTs are viable alternatives to automated manual transmissions (AMTs). For vehicles equipped with engines that can generate considerable torque, large clutch-slip energy losses occur during power-on gear shifts and, as a result, DCTs need wet clutches for effective heat dissipation. This requirement substantially reduces DCT efficiency because of the churning and ancillary power dissipations associated with the wet clutch pack. To the knowledge of the authors, this study is the first to analyse the detailed power loss contributions of a DCT with wet clutches, and their relative significance along a set of driving cycles. Based on these results, a novel hybridised AMT (HAMT) with a single dry clutch and an electric motor is proposed for the same vehicle. The HAMT architecture combines the high mechanical efficiency typical of AMTs with a single dry clutch, with the torque-fill capability and operational flexibility allowed by the electric motor. The measured efficiency maps of a case study DCT and HAMT are compared. This is then complemented by the analysis of the respective fuel consumption along the driving cycles, which is simulated with an experimentally validated vehicle model. In its internal combustion engine mode, the HAMT reduces fuel consumption by >9% with respect to the DCT.

24 June 2024 in Vehicles
Verified
Journal Article
Open access
PDF file
TITaha Taner İnal
Taha Taner İnal
GCGalip Cansever
Galip Cansever
BYBarış Yalçın
Barış Yalçın
GÇGürkan Çetin
Gürkan Çetin
AKAhu Ece Hartavi Karcı
Ahu Ece Hartavi Karcı
The primary objective of this research is to address the existing gap about the use of a path-planning algorithm that will reduce energy consumption in off-road applications of tracked electric vehicles. The study focuses on examining various off-road terrains and their impact on energy consumption to validate the effectiveness of the proposed solution. To achieve this, a tracked electric vehicle energy model that incorporates vehicle dynamics is developed and verified using real vehicle driving data logs. This model serves as the foundation for devising a strategy that can effectively enhance the energy efficiency of off-road tracked electric vehicles in real-world scenarios. The analysis involves a thorough examination of different off-road terrains to identify strategies that can adapt to diverse landscapes. The path planning strategy employed in this study is a modified version of the A*, called the Energy-Efficient Path Planning (EEPP) algorithm, specifically tailored for the dynamic energy consumption model of off-road tracked electric vehicles. The energy consumption of the produced paths is then compared using the validated energy consumption model of the tracked electric vehicle. It is important to note that the identification of an energy-efficient path heavily relies on the characteristics of the vehicle and the dynamic energy consumption model that has been developed. Furthermore, the algorithm takes into account real-world and practical considerations associated with off-road applications during its development and evaluation process. The results of the comprehensive analysis comparing the EEPP algorithm with the A* algorithm demonstrate that our proposed approach achieves energy savings of up to 6.93% and extends the vehicle’s operational range by 7.45%.

30 May 2025 in Energies
Verified
Journal Article
Open access
PDF file
MGMohammad Ghazali
Mohammad Ghazali
IGIshaan Gupta
Ishaan Gupta
KBKemal Buyukkabasakal
Kemal Buyukkabasakal
MAMohamed Amine Ben Abdallah
Mohamed Amine Ben Abdallah
CHCaner Harman
Caner Harman
AKAhu Ece Hartavi Karcı
Ahu Ece Hartavi Karcı
Recently, the electrification and automation of heavy-duty trucks has gained significant attention from both industry and academia, driven by new legislation introduced by the European Union. During a typical drive cycle, the mass of an urban service truck can vary substantially as waste is collected, yet most existing studies rely on a single controller with fixed gains. This limits the ability to adapt to mass changes and results in suboptimal energy usage. Within the framework of the EU-funded OBELICS and ESCALATE projects, this study proposes a novel control strategy for a semi-autonomous refuse truck. The approach combines a particle swarm optimization algorithm to determine optimal controller gains and a multiple model controller to adapt these gains dynamically based on real-time vehicle mass. The main objectives of the proposed method are to (i) optimize controller parameters, (ii) reduce overall energy consumption, and (iii) minimize speed tracking error. A cost function addressing these objectives is formulated for both autonomous and manual driving modes. The strategy is evaluated using a real-world drive cycle from Eskişehir City, Turkiye. Simulation results show that the proposed MMC-based method improves vehicle performance by 5.19% in autonomous mode and 0.534% in manual mode compared to traditional fixed-gain approaches.

Verified
Journal Article
Open access
PDF file
MGMehmet Göl
Mehmet Göl
ABAhmet Fevzi Baba
Ahmet Fevzi Baba
AKAhu Ece Hartavi Karcı
Ahu Ece Hartavi Karcı
Due to the limitations of current battery technologies—such as lower energy density and high cost compared to fossil fuels—electric vehicles (EVs) face constraints in applications requiring extended range or heavy payloads, such as refuse trucks. As a midterm solution, hybrid electric vehicles (HEVs) combine internal combustion engines (ICEs) and electric powertrains to enable flexible energy usage, particularly in urban duty cycles characterized by frequent stopping and idling. This study introduces a model-based energy management strategy using the Equivalent Consumption Minimization Strategy (ECMS), tailored for a retrofitted series hybrid refuse truck. A conventional ISUZU NPR 10 truck was instrumented to collect real-world driving and operational data, which guided the development of a vehicle-specific ECMS controller. The proposed strategy was evaluated over five driving cycles—including both standardized and measured urban scenarios—under varying load conditions: Tare Mass (TM) and Gross Vehicle Mass (GVM). Compared with a rule-based control approach, ECMS demonstrated up to 14% improvement in driving range and significant reductions in exhaust gas emissions (CO, NOx, and CO2). The inclusion of auxiliary load modeling further enhances the realism of the simulation results. These findings validate ECMS as a viable strategy for optimizing fuel economy and reducing emissions in hybrid refuse truck applications.

Verified
Journal Article
Open access
PDF file
MGMohammad Ghazali
Mohammad Ghazali
ZSZaid Samadi
Zaid Samadi
MGMehmet Göl
Mehmet Göl
ADAli Demir
Ali Demir
KRKemal Rodoplu
Kemal Rodoplu
AKAhu Ece Hartavi Karcı
Ahu Ece Hartavi Karcı
The trend towards shorter supply chains and home delivery has rapidly increased delivery van traffic. Consequently, in the 20 years prior to 2018, delivery traffic has increased by 71%, while passenger vehicles have increased only by 13%. This drastic change in traffic patterns presented new challenges to decision makers and fortunately coincided with changes in the automotive industry, i.e., the advent of automation. However, the design of a controller is not straightforward due to the complex and nonlinear vehicle dynamics and the nonlinear relationship between the controller, tracking error and trajectory. This paper proposes a novel hybrid artificial-intelligence-based lateral control system for an autonomous delivery van to address these challenges to achieve the lowest value of tracking error. The strategy consists of multiple simultaneously operating fuzzy controllers. Their output signals are optimally weighted by a genetic algorithm to determine the proper allocation of control signals for calculating the final steering angle. Six different scenarios are implemented to evaluate the algorithm. A comparative analysis is then performed with two alternative state-of-the-art methods: (i) manually weighted and (ii) geometrically weighted controllers. During the tests, the vehicle’s speed varied, and the roads considered ranged from simple roads to a series of curves. The results show that the proposed strategy leads to a reduction of up to 91.2% and 61.1% in tracking error compared to the manually and geometrically weighted alternatives, respectively.

11 October 2025
Verified
Book Chapter
Open access
PDF file
AAAli Serdar Atalay
Ali Serdar Atalay
AKAhu Ece Hartavi Karcı
Ahu Ece Hartavi Karcı
IAİbRahim Arif
İbRahim Arif
SESalih Ergun
Salih Ergun
AKAlper Kanak
Alper Kanak
Maintenance, traditionally perceived as a reactive cost and a hindrance, poses challenges to efficiency when components succumb to unforeseen breakdowns. In addition to the financial implications, the repair process also incurs substantial time wastage. To overcome these obstacles and achieve enhanced efficiency and cost savings within the manufacturing sector, this paper presents a conceptual study of a technologically advanced predictive maintenance (PdM) approach, particularly in the realm of artificial intelligence-powered digital twins. The effectiveness of these solutions hinges on their data-driven nature, technical feasibility, and acceptance by industry stakeholders.