The shifted frequency-based electromagnetic transient (SFEMT) simulation is much more efficient than traditional electromagnetic transient (EMT) simulation for AC grids. This letter proposes a novel interface for the co-simulation of the SFEMT model and the conventional EMT model. The fundamentals of SFEMT modeling are first derived. Then, an interface for the co-simulation of EMT and SFEMT models is proposed based on the estimation of signal parameters via rotational invariance techniques. Theoretical analyses and test results demonstrate the effectiveness of the proposed method.
With the large-scale integration of wind power, it is essential to establish an electromagnetic transient (EMT) model of a wind turbine system. Focusing on the problem of the difficulty in obtaining the parameters of the direct-driven permanent magnet synchronous generator (PMSG) model, this manuscript proposes a method based on trajectory sensitivity analysis and improved gray wolf optimization (IGWO) for identifying the parameters of the PMSG EMT model. First, a model of a PMSG wind turbine is established on an EMT simulation platform. Then, the key parameters of the model are determined based on the sensitivity analysis. Five control parameters are selected as the key parameters for their higher sensitivity indexes. Finally, the key parameters are accurately identified, using the proposed IGWO algorithm. The final case study demonstrates that the proposed IGWO algorithm has better optimization performance compared with the GWO algorithm and particle swarm optimization (PSO) algorithm. In addition, the simulation waveforms show that the identified parameters are accurate and applicable to other operating conditions.
As the penetration rate of new energy continues to increase, the active voltage support capability of the power system is decreasing. The grid-forming static var generator (GFM-SVG) features the advantages of fast dynamic response, strong reactive power support, and high overload capacity, which play an important role in maintaining voltage stability. However, the parameters of the GFM-SVG are often unknown due to trade secret reasons. Meanwhile, the parameters may be changed during the long-term operation of the system, which brings challenges to the system stability analysis and control. Aiming at this problem, a parameter identification method based on trajectory sensitivity analysis and the proximal policy optimization (PPO) algorithm is proposed in this paper. Firstly, through trajectory sensitivity analysis, the key influential parameters on the output characteristics of the GFM-SVG can be selected, which can reduce the dimensionality of the identification parameters and improve the identification efficiency. Then, a parameter identification framework based on the PPO algorithm is constructed for GFM-SVGs, which utilizes its adaptive learning capability to achieve accurate identification of the key parameters of the system. Finally, the effectiveness of the proposed parameter identification method is verified through simulation examples. The simulation results show that the identification error of the parameters in the GFM-SVG is small. The proposed method can characterize the output response of the GFM-SVG under different operating conditions.
This paper addresses the transient voltage stability problem in power systems with high penetration of renewable energy by proposing a hierarchical risk-warning method that integrates Koopman-theory-based transient voltage trajectory prediction and stability margin quantification. First, an online Koopman-theory-based transient voltage trajectory prediction model is constructed through the adaptive optimization of basis functions, a dynamic operator update mechanism, and multistage error correction, significantly enhancing prediction accuracy and generalization capability. Second, a piecewise-weighted quantitative index for transient voltage stability margins is proposed, achieving refined stability assessments ranging from individual nodes to the entire system. Finally, a risk-mapping function based on utility theory is established to convert continuous margin indices to discrete risk levels, forming a complete hierarchical warning system for the transient voltage risk. Simulation results demonstrate that the proposed method achieves precise voltage trajectory prediction and stable-state judgment across various scenarios, effectively identifies critical system weaknesses, and provides reliable technical support for the safety prevention and control of the power system’s transient voltage.