Tung Nguyen

Mr. Tung Nguyen

Korea Electrotechnology Research Institute, Changwon, Gyeongnam, Republic of Korea
+1
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 December 2021 in Energies
Verified
Journal Article
Open access
PDF file
JLJi-young Lee
Ji-young Lee
Ji-Heon LeeJi-Heon Lee
Ji-Heon Lee
TNTung Nguyen
Tung Nguyen
This paper presents the design of an axial-flux permanent-magnet (AFPM) generator used for hybrid electric propulsion drone applications. The design objectives of the AFPM generator are high power density, which is defined as output power per generator weight, and high efficiency. In order to satisfy the requirements for the target application and consider the practical problems in the manufacturing process, the structure of the AFPM generator comprising a double-rotor single-stator (DR-SS) was studied. In order to determine the rotor topology and stator winding specifications that had the greatest impact on performance in the DR-SS type design process, we selected three rotor models according to the arrangement of the magnetization direction and three stator models according to the coreless winding specifications. These models were first compared and analyzed. Then, a 3-D finite element method was performed to calculate the magnetic, mechanical, and thermal characteristics of the designed models. By consideration of the output power, efficiency, temperature, and mechanical stability, etc., a topology suitable for the design of generators for UAV systems was determined and manufactured. The reliability of the design result was confirmed through the test.

15 October 2021 in Energies
Verified
Journal Article
Open access
PDF file
Ji-Heon LeeJi-Heon Lee
Ji-Heon Lee
JLJi-young Lee
Ji-young Lee
PLPhuong Thi Luu
Phuong Thi Luu
TNTung Nguyen
Tung Nguyen
In this paper, we propose a method to efficiently design joint motors, which are the key elements that drive a cooperative robot. Designing joint motors with more power than the required capacity increases the volume and weight of the robot. On the other hand, designing joint motors with less power than the required capacity can lead to failure and safety accidents because of high temperature rise and mechanical instability. Therefore, in this study, the required capacities of the joint motors were determined through a dynamic analysis of the robot system and incorporated in the joint motor design specifications. An electromagnetic analysis was performed during design using the two-dimensional finite element method, and the detailed dimensions of the motor were determined using the response surface method, which is an optimal design technique. The thermal characteristics of the joint motor were evaluated using a thermal equivalent circuit. The designed joint motors were manufactured, and their performance were tested not only at the component level, but also at the robot system level to verify experimentally the validity and usefulness of the proposed joint motor design method.

31 May 2023 in IEEE Access
Verified
Journal Article
Open access
TNTung Nguyen
Tung Nguyen
JLJi-young Lee
Ji-young Lee
Ji-Heon LeeJi-Heon Lee
Ji-Heon Lee
The demand for electric bikes has been increasing in recent years, and so has their drive, which requires a high power-to-weight ratio or a high power density. An axial-flux permanent magnet motor with a Halbach-array is an excellent choice for electric bike drives thanks to its known characteristics of high power density, reliability, and efficiency. However, because an axial-flux machine topology is not common, the manufacturing process can be challenging, especially in the stator core. A good solution to this problem is to remove the stator tooth tips, as this simplifies the stator core shape and makes manufacturing easier. The proposed electric bike has limited housing dimension constraints; thus magnet sensors were implemented to support the Hall sensors in detecting the rotor position. The designed models were analyzed using the 3D finite element method (FEM) to determine their electromagnetic and thermal characteristics. A prototype was manufactured based on the final design and tested under rated conditions to validate the analysis results.

3 April 2025 in IEEE Access
Verified
Journal Article
Open access
KTKhanh Vu Tran
Khanh Vu Tran
TNThanh-Tuan Nguyen
Thanh-Tuan Nguyen
TNTung Nguyen
Tung Nguyen
JKJae Beom Kang
Jae Beom Kang
JLJi-young Lee
Ji-young Lee
Yon-Do ChunYon-Do Chun
Yon-Do Chun
The increasing demand for lightweight, high-efficiency electrical machines has driven research into copper-carbon nanotube (Cu-CNT) composites as alternatives to copper windings. While Cu-CNT-based conductors show promise, their bi-directional electromagnetic-thermal behavior in permanent magnet synchronous generators (PMSGs) remains underexplored. This study evaluated the feasibility of Cu-CNT windings to enhance power density, thermal management, and efficiency through a coupled analysis using 2D electromagnetic finite element analysis integrated with a lumped parameter thermal network. Two Cu-CNT materials with a resistivity of $7.12\times 10^{-8}~\Omega $ .m (Cu-CNT #1) and $2.12\times 10^{-8}~\Omega $ .m (Cu-CNT #2) were tested over speeds ranging from 1000 to 4800 RPM with parametric variations in axial length and outer diameter. Results show that Cu-CNT #2 delivered higher specific power and, at high temperatures, achieved better efficiency than the copper-based model. Due to limited composite material samples from current processing and manufacturing, a copper coil prototype was manufactured for validation. The good agreement between the simulation and the test results of the copper-based confirms the accuracy of the coupled electromagnetic-thermal analysis. As a result, the correctness of the Cu-CNT-based model is validated.

19 October 2023 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
TNTung Nguyen
Tung Nguyen
Ji-Heon LeeJi-Heon Lee
Ji-Heon Lee
JKJae-Beom Kang
Jae-Beom Kang
JLJi-young Lee
Ji-young Lee
The winding eddy current loss can cause a dangerous temperature rise in an electric machine, especially in a coreless topology. The coreless axial-flux machine is an unconventional machine configuration with many advantages, but its application is limited due to the winding eddy current loss. However, this problem has not yet been studied extensively in previous literature due to the relatively new topology. Furthermore, it is very difficult to analyze this loss accurately, because it would usually require modeling each of the machine’s conductors, extending the designing and computation time significantly. This article is one of the few that utilize a hybrid method to calculate winding ac loss with both analytical method and simplified 3D finite element analysis of a coreless axial-flux machine, under both no load and load conditions. This method can reduce the computation time while giving relatively good accuracy, making the coreless axial-flux topology becomes more feasible. Losses at multiple sizes of conductors were calculated using this method and thermal analysis was performed with 3D FEA to determine which conductor size will not cause the thermal problem. The analysis results of losses and temperature are then validated with test results.

18 May 2023 in Electronics
Verified
Journal Article
Open access
PDF file
JKJae Beom Kang
Jae Beom Kang
JLJi-young Lee
Ji-young Lee
TNTung Nguyen
Tung Nguyen
HKHyeong-Jin Kim
Hyeong-Jin Kim
Ji-Heon LeeJi-Heon Lee
Ji-Heon Lee
This study analyzes the material deformation of electrical steel with aging and its effects on the electromagnetic and thermal characteristics of a Brushless Wound-Field Synchronous Generator (BL-WFSG). First, in order to confirm the material deformation of electrical steel applied to the BL-WFSG, magnetic property tests are performed on the core sheets of the old and new generators. Those two generators are made of the same material, so there was no difference except for their usage time. Based on the results of the magnetic property tests, an electromagnetic field analysis is performed on the old and new generators, and analysis results are compared in order to confirm the effects of material deformation on the electromagnetic characteristics of BL-WFSG. Then, a thermal analysis is performed on the old and new generators using losses calculated by electromagnetic field analysis as heat sources, and analysis results are compared in order to confirm the effects of material deformation on the thermal characteristics of BL-WFSG. Finally, an additional electromagnetic analysis is performed on both the old and new generators, using the exact winding resistances that were calculated in the thermal analysis for each respective generator in order to calculate and compare the efficiency of the old and new generators. Through this process, the authors confirmed the effects of material deformation of the rotor and stator cores due to aging on the electromagnetic and thermal characteristics of the BL-WFSG.