Brain-Computer Interface (BCI) technology has been shown to provide new communication possibilities, conveying brain information externally. BCI-based robot control has started to play an important role, especially in medically assistive robots but not only there. For example, a BCI-controlled robotic arm can provide patients diagnosed with neurodegenerative diseases such as Locked-in syndrome (LIS), Amyotrophic lateral sclerosis (ALS), and others with the ability to manipulate different objects. This study presents the optimization of the configuration parameters of a three-class Motor Imagery (MI) -based BCI for controlling a six Degrees of Freedom (DOF) robotic arm in a plane. Electroencephalography (EEG) signals are recorded from 64 positions on the scalp according to the International 10-10 System. In terms of the resulting classification of error rates, we investigated twelve time windows for the spatial filter and classifier calculation and three time windows for the variance smoothing time. The lowest error rates were achieved when using a 3 s time window for creating the spatial filters and classifier, for a variance time window of 1.5 s.
30 September 2024 in Fırat Üniversitesi Mühendislik Bilimleri Dergisi
Bu çalışmanın amacı, elektrikli kanallı bir fanın (EDF) farklı güç oranlarında verdiği itkileri test etmektir. Nozul girişine takılan iki servomotorun hareketiyle 3°, -3°, 6°, -6° açılarında itki yönlendirmesi yapılmıştır. Bu çalışma ile EDF motorların performans kapasitesinin belirlenmesi de amaçlanmıştır. Yapılan çalışmada, EDF motora güç verildiğinde, EDF üzerine yerleştirildiği kızaklı mekanizma sayesinde rahatça hareket edebilmekte ve ürettiği itki, yük hücresi vasıtası ile akış yönünde ölçülebilmektedir. Çalışmamızda geliştirilen test düzeneğine farklı çaplardaki EDF’lerin takılıp çıkarılması mümkündür. Hesaplamalı akışkanlar dinamiği (HAD) analizleri, daimi akış için farklı dönüş hızlarında elde edilmiştir. Ana çıktılar olan z-yönündeki itki değerleri açılı nozul senaryolarında kaydedilmiş ve grafik halinde verilerek görselleştirilmiştir. Ayrıca YZ düzleminde hız kontürleri ve üç boyutlu yolak çizgisi tüm akış alanı için hız değerlerine göre HAD analizler sonucunda gösterilmiştir. Nominal itki değerleri ve standart sapmaları farklı güç yüzdeleri için test edilen açılarda verilmiş ve aynı grafik üzerinde HAD analizi sonuçları karşılaştırma amacıyla gösterilmiştir. İtki kuvvetlerinin ölçümü sonucunda, güç yüzdesi arttırıldıkça orantılı bir şekilde itki değerinin artmakta olduğu gözlenmiştir. Deneysel sonuçlarla HAD analiz sonuçları birbirleriyle tutarlı ve yakındır. Elde edilen deneysel değerlere lineer (doğrusal) regresyon yapılmış ve “regresyon katsayısı” 1’e yakın elde edilmiştir. Bu durum güç yüzdesi ile itki değerleri arasında oluşturulan doğrusal regresyonun uyumlu olduğunu göstermektedir.
Deflecting vanes are a common means of attitude control for electric ducted fan (EDF) vehicles. However, vane forces are mostly measured at a single operating condition, and the usable deflection range is usually assumed. A four-vane vectoring module fitted to a 70 mm EDF was tested on a static rig. Axial and normal forces were measured at six vane angles up to 25° and eight throttle settings from 10% to 80%. Rotational speed and exhaust velocity were measured, and smoke visualized the deflected jet. The vanes turned the force through less than the commanded angle. At each commanded angle, this shortfall varied by no more than 1.5° with throttle from 40%. At 20°, the effective vectoring angle was 16.0° to 17.2°. The thrust vectoring efficiency peaked at 20° at every throttle setting, from 40% to 20.9%. Beyond 20°, the normal force decreased and the resultant continued to fall. Hence, 20° was the best setting tested. At 80% throttle and 20°, the normal force was 1.56 N, and the resultant was 72% of the 7.89 N reference thrust. For control design, one relation between commanded and effective angle holds from 40% throttle, and commands beyond 20° add no control force.