Roller compacted concrete (RCC) has gained prominence in the construction industry due to its durability, cost-effectiveness, and environmental benefits, particularly with the incorporation of high-volume fly ash (HVFA). However, traditional experimental approaches to evaluating RCC’s mechanical properties, such as compressive strength (CS) and splitting tensile strength (STS), are resource-intensive and time-consuming. To address these challenges, this study explores the application of artificial intelligence (AI), specifically artificial neural networks (ANN) and a hybrid ANN-Biogeography-Based Optimization (ANN-BBO) model, to predict the CS and STS of RCC. A dataset comprising 168 RCC mixtures, incorporating various material and process parameters, was analyzed. The ANN-BBO model demonstrated superior predictive accuracy compared to a standalone ANN, with R2 values exceeding 0.98 for both CS and STS, significantly reducing error margins. The findings highlight the effectiveness of AI-driven modeling in optimizing RCC mix designs, minimizing experimental costs, and enhancing the sustainability of concrete production. This research underscores the potential of integrating AI with optimization techniques to refine RCC performance assessment, which enables and facilitates more efficient and sustainable infrastructure development.
In this study, the effects of different fiber types on improving the high-temperature performance of roller-compacted concrete (RCC) were comprehensively investigated. For this purpose, 60 mm long steel (S), polypropylene (PP), and environmentally sustainable waste steel (WS) fibers were incorporated into RCC at volumetric ratios of 0%, 0.25%, 0.50%, 0.75%, 1.00%, and 1.25%. The prepared specimens were exposed to controlled conditions at 25 °C (room temperature), 300 °C, 600 °C, and 900 °C, and the influence of thermal exposure on compressive strength and permeability characteristics was thoroughly evaluated. The findings revealed that high temperatures led to significant changes in the physical and mechanical properties of the concrete. Notably, at elevated temperatures such as 600 °C and 900 °C, S and WS fibers were found to reduce strength loss by limiting the propagation of microcracks within the concrete matrix. However, PP fibers were observed to lose their effectiveness at high temperatures due to melting in the range of approximately 160–170 °C, which negatively affected mechanical performance. One of this study’s key findings is that waste steel fibers offer a sustainable alternative while exhibiting comparable performance to conventional steel fibers. These results highlight the potential of recycling industrial waste to reduce environmental impact and lower overall costs.
The urgent need to decarbonize the global cement industry is compounded by the declining availability of conventional supplementary cementitious materials (SCMs). Limestone-calcined clay cement (LC3) emerges as a highly sustainable alternative, enabling up to 50 percent clinker replacement and an approximate 40 percent reduction in carbon dioxide emissions. Unlike existing reviews that focus on basic material properties, this paper critically bridges the gap between fundamental hydration thermodynamics and next-generation sustainable engineering applications. Through a structured bibliographic analysis of 135 contemporary sources published between 2000 and 2026, it traces the evolution of LC3 from a laboratory innovation to a highly promising solution for large-scale industrial implementation and circular economy integration. The discussion highlights the synergistic alumina carbonate reaction. This reaction forms carboaluminate phases. These phases significantly densify the microstructure and enhance long term durability. Key engineering properties are examined, contrasting rheological challenges from high water demand and carbonation susceptibility against its exceptional chloride resistance in aggressive environments. The transition to field application is thoroughly assessed, emphasizing technological advances in flash calcination, environmental footprint reduction through life cycle assessment (LCA), and production scalability. Finally, rather than restating known challenges, this review exposes the limitations of current empirical mitigation strategies. It proposes a targeted research agenda focused on molecular-level green admixture design and field calibrated durability models to support the integration of LC3 into emerging sustainable technologies such as 3D concrete printing.
This study evaluates the multi-physical effects of fiber type, length, and dosage on the fresh properties, mechanical performance, and environmental impact of roller-compacted concrete (RCC). Industrial steel (S), polypropylene (PP), and waste steel (WS) fibers with lengths of 30 mm and 60 mm were incorporated into RCC mixtures at volume fractions ranging from 0% to 1.25%. The experimental program included Vebe consistency tests, mechanical strength assessments, and fracture energy measurements, complemented by a simplified cradle-to-gate Global Warming Potential (GWP) analysis. Furthermore, Taguchi and ANOVA methods were employed to statistically determine the hierarchy of influential parameters. The statistical analysis revealed that fiber dosage was the most dominant factor, contributing approximately 68–78% to the variation in compressive, splitting tensile, and flexural strengths, whereas fiber type governed the consistency. Experimentally, S and WS fibers significantly enhanced the post-cracking behavior and fracture energy compared to the brittle control mix, although they imposed a greater penalty on workability than PP fibers. Notably, at comparable dosages, WS fibers exhibited mechanical interlock and toughness performance nearly identical to industrial steel fibers. The environmental analysis demonstrated that replacing industrial steel fibers with WS fibers reduces the embodied carbon by approximately 240 kgCO2-eq/m3 at the maximum dosage, without compromising mechanical reliability. These findings suggest that waste steel fibers offer a superior performance-to-carbon ratio, making them a viable sustainable alternative for heavy-duty RCC pavements where crack control is prioritized.
Today, various strategies are being adopted to produce more environmentally friendly cementitious systems. A commonly adopted strategy is the enhancement of energy efficiency in the clinker grinding process through the use of grinding aids (GAs). Another approach is to reduce cement consumption by partially replacing cement with mineral additives such as fly ash. The literature has highlighted that the use of GAs during clinker grinding can narrow the particle size distribution, thereby promoting higher rates of mineral additive replacement. Nevertheless, the literature still lacks comprehensive insight into how the combined application of commonly used GAs influences the substitution levels of mineral additives. In this regard, this study thoroughly examined the influence of varying proportions and dosages of Triethanolamine (TEA) and Triisopropanolamine (TIPA)—two commonly employed grinding aids—on the hydration kinetics, compressive strength development, and life cycle performance of fly ash (FA)-blended cementitious systems. The mixtures prepared with the cements produced were analyzed through XRD, TGA, and SEM techniques, and the compressive strength results were evaluated using the Taguchi method. The results demonstrated that, irrespective of the type of additive used, the use of GAs enhanced pozzolanic activity and compressive strength. In particular, the GA combination containing 75% TIPA and 25% TEA proved the most superior results in terms of hydration kinetics, mechanical strength, and environmental performance. It was demonstrated that the combined use of TEA and TIPA in specific proportions creates a synergistic effect, enabling the development of more efficient binder systems.
Purpose: This study aims to explore the potential of three-dimensional (3D) printing technology to enhance geogrid production, focusing on the influence of filament type on tensile performance. Geogrids, which reinforced soils by forming interlocking mechanisms with soil grains, were manufactured using polypropylene (PP) and polyethylene terephthalate glycol-modified (PET-G) filaments. The printability of these materials, along with thermoplastic polyurethane (TPU) and high-density polyethylene (HDPE), was initially assessed, revealing challenges with TPU and HDPE. Design/methodology/approach: Tensile tests, conducted on both single-rib and multirib samples, compared the mechanical performance of the 3D-printed geogrids against a factory-made PP geogrid. Findings: The results indicated that while the factory-made geogrid demonstrated superior tensile strength and ductility, 3D-printed geogrids, particularly those made with PP, exhibited promising tensile characteristics that could be suitable for specific applications. However, 3D-printed PET-G geogrids showed higher tensile strength but were more brittle. The findings suggest that although 3D printing offers a viable method for geogrid production, further optimization is required to achieve performance levels comparable to traditional manufacturing methods. Originality/value: While existing research on 3D-printed geogrids exists, studies comparing them with their factory-produced counterparts are currently limited. This research provides a unique comparison of the tensile modulus, elongation and tensile strength of factory-made geogrids and 3D-printed geogrids produced with different filaments.