Uwe König

Dr. Uwe König

Malvern Panalytical B.V., Almelo, The Netherlands

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 October 2021 in Minerals
Verified
Journal Article
Open access
PDF file
Uwe KönigUwe König
Uwe König
Nickel laterite ore is used to produce nickel metal, predominantly to manufacture stainless steel as well as nickel sulfate, a key ingredient in the batteries that drive electric vehicles. Nickel laterite production is on the rise and surpassing conventional sulfide deposits. The efficiency of mining and processing nickel laterites is defined by their mineralogical composition. Typical profiles of nickel laterites are divided into a saprolite and a laterite horizon. Nickel is mainly concentrated and hosted in a variety of secondary oxides, hydrous Mg silicates and clay minerals like smectite or lizardite in the saprolite horizon, whereas the laterite horizon can host cobalt that could be extracted as a side product. For this case study, 40 samples from both saprolite and laterite horizons were investigated using X-ray diffraction (XRD) in combination with statistical methods such as cluster analysis. Besides the identification of the different mineral phases, the quantitative composition of the samples was also determined with the Rietveld method. Data clustering of the samples was tested and allows a fast and easy separation of the different lithologies and ore grades. Mineralogy also plays a key role during further processing of nickel laterites to nickel metal. XRD was used to monitor the mineralogy of calcine, matte and slag. The value of mineralogical monitoring for grade definition, ore sorting, and processing is explained in the paper.

28 September 2021 in Minerals
Verified
Journal Article
Open access
PDF file
Herbert PöllmannHerbert Pöllmann
Herbert Pöllmann
Uwe KönigUwe König
Uwe König
Lithium plays an increasing role in battery applications, but is also used in ceramics and other chemical applications. Therefore, a higher demand can be expected for the coming years. Lithium occurs in nature mainly in different mineralizations but also in large salt lakes in dry areas. As lithium cannot normally be analyzed using XRF-techniques (XRF = X-ray Fluorescence), the element must be analyzed by time consuming wet chemical treatment techniques. This paper concentrates on XRD techniques for the quantitative analysis of lithium minerals and the resulting recalculation using additional statistical methods of the lithium contents. Many lithium containing ores and concentrates are rather simple in mineralogical composition and are often based on binary mineral assemblages. Using these compositions in binary and ternary mixtures of lithium minerals, such as spodumene, amblygonite, lepidolite, zinnwaldite, petalite and triphylite, a quantification of mineral content can be made. The recalculation of lithium content from quantitative mineralogical analysis leads to a fast and reliable lithium determination in the ores and concentrates. The techniques used for the characterization were quantitative mineralogy by the Rietveld method for determining the quantitative mineral compositions and statistical calculations using additional methods such as partial least square regression (PLSR) and cluster analysis methods to predict additional parameters, like quality, of the samples. The statistical calculations and calibration techniques makes it especially possible to quantify reliable and fast. Samples and concentrates from different lithium deposits and occurrences around the world were used for these investigations. Using the proposed XRD method, detection limits of less than 1% of mineral and, therefore down to 0.1% lithium oxide, can be reached. Case studies from a hard rock lithium deposit will demonstrate the value of mineralogical monitoring during mining and the different processing steps. Additional, more complex considerations for the analysis of lithium samples from salt lake brines are included and will be discussed.

11 November 2021 in Minerals
Verified
Journal Article
Open access
PDF file
Uwe KönigUwe König
Uwe König
SVSabine Verryn
Sabine Verryn
Heavy mineral sands are the source of various commodities such as white titanium dioxide pigment and titanium metal. The three case studies in this paper show the value of X-ray diffraction (XRD) and statistical methods such as data clustering for process optimization and quality control during heavy mineral processing. The potential of XRD as an automatable, reliable tool, useful in the characterization of heavy mineral concentrates, product streams and titania slag is demonstrated. The recent development of ultra-high-speed X-ray detectors and automated quantification allows for ‘on the fly’ quantitative X-ray diffraction analysis and truly interactive process control, especially in the sector of heavy mineral concentration and processing. Apart from the information about the composition of a raw ore, heavy mineral concentrate and the various product streams or titania slag, this paper provides useful information by the quantitative determination of the crystalline phases and the amorphous content. The analysis of the phases can help to optimize the concentration of ores and reduction of ilmenite concentrate. Traditionally, quality control of heavy mineral concentrates and titania slag relies mainly on elemental, chemical, gravimetrical, and magnetic analysis. Since the efficiency of concentration of minerals in the different product streams and reduction depends on the content of the different minerals, and for the latter on the titanium and iron phases such as ilmenite FeTiO3, rutile TiO2, anatase TiO2, or the various titanium oxides with different oxidation stages, fast and direct analysis of the phases is required.

17 November 2014 in Powder Diffraction
Verified
Journal Article
Closed access
PDF file
Uwe KönigUwe König
Uwe König
TDThomas Degen
Thomas Degen
NNNicholas Norberg
Nicholas Norberg
The use of high-speed detectors made X-ray diffraction (XRD) become an important tool for process control in mining and metal industries. Decreasing ore qualities and increasing prices for raw materials require a better control of processed ore and a more efficient use of energy. Traditionally quality control of iron ore sinter has relied on time-consuming wet chemistry. The mineralogical composition that defines the physical properties such as hardness or reducibility is not monitored. XRD analysis in combination with Rietveld quantification and statistical data evaluation using partial least-squares regression (PLSR) has been successfully established to determine the mineralogical composition and the Fe 2+ content of iron ore sinter within an analysis time of less than 10 min per sample. A total of 35 iron ore sinter samples were measured and evaluated using PLSR and the Rietveld method. The results were compared with wet chemistry data. PLSR results show accuracy for the Fe 2+ content of ±0.14%. No pure phases, crystal structures, or complex modeling of peak shapes are required. The Rietveld method was used to quantify the total phase composition of the samples. The Fe 2+ content could be calculated from all phases present. Both methods take the full XRD pattern into account and can be simultaneously applied on the same measurement. PLSR was found to be the more robust method if only Fe 2+ results are required. The Rietveld method helps predict other parameters such as the compressional strength of the sinter by monitoring all existing phases (e.g., larnite, C 2 S, or silico-ferrite of calcium and aluminum phases).

17 October 2021 in Minerals
Verified
Journal Article
Open access
PDF file
MPMatteo Pernechele
Matteo Pernechele
ÁLÁngel López
Ángel López
DDDiego Davoise
Diego Davoise
MMMaría Maestre
María Maestre
Uwe KönigUwe König
Uwe König
NNNicholas Norberg
Nicholas Norberg
An essential operation in the mineral processing of copper ores into concentrates is blending, as it guarantees a constant feed for the flotation cells, increases metal recovery rate and reduces tailings. In this study, copper ores from Huelva province (Spain) were investigated by quantitative XRD (X-ray diffraction) methods to optimize blending and detect penalty minerals, which can affect flotation and concentrate quality. The Rietveld method in combination with cluster analysis, PLSR and more traditional chemical analysis provide a more complete and in-depth characterization of the ore and the whole process. The mineralogical monitoring can be fully automated to enable real-time decision making.

20 March 2012
Verified
Book Chapter
Closed access
PDF file
Uwe KönigUwe König
Uwe König
LGLuciano Gobbo
Luciano Gobbo
CRCeleste Reiss
Celeste Reiss