New alternative jet fuels have provided many advantages in the aviation industry, especially in terms of economics and environment. However, fuel–seal compatibility is one of the major issues that restricts alternative fuel advancement into the market. Thus, to help understand and solve the problem, this study examines the swelling effect of prepared and non-prepared O-rings in different fuels and aromatic species. Stress relaxation experiments were carried out to evaluate seal compatibility under compression, which mimics engine operation conditions. Seals were compressed and immersed in a variety of fuels and their blends for about 90h while maintaining a constant temperature 30°C and constant compression force of 25% seal thickness. The two types of elastomers investigated were fluorosilicone and nitrile O-rings, which are predominantly used in the aviation industry. Meanwhile, three different fuels and aromatic species were utilised as the variables in the experiments. The fuels used were Jet-A1, SPK and SHJFCS, while the aromatic species added were propyl benzene, tetralin and p-xylene. The swelling effects were determined from the P/Po value. Results indicate that Jet-A1 has the highest swelling effect, followed by SHJFCS and SPK. It was observed that the higher the percentage of aromatics in fuel, the higher the rate of swelling. Furthermore, prepared seals had a lower swelling rate than did non-prepared seals. Meanwhile, the intensity of the swelling effect in the Jet-A1-SHJFCS blends was in the order of 60/40, 85/15 and 50/50 blend. The work done in this study will aid in the selection of suitable aromatic species in future fuels. The novelty of this research lies in the determination of the appropriate amount of aromatic content as well as the selection of type of aromatic and its mixture fuel. Moreover, the various proportions of fuel blends with aromatic are investigated. The primary aim of this study is to understand the behaviour of prepared and non-prepared seals, and their compatibility with alternative fuels.
The study aims to establish the behavior of hydro processed esters and fatty acids (HEFA), as a type of alternative fuel with a conventional Jet A-1 as a reference fuel using a GTCP85 aircraft auxiliary power unit (APU). The research evaluates the impact of fuel properties on emissions using HEFA (blends in 18 proportions) and Jet A-1. With increasing HEFA proportions in the fuel, it is observed that reduction of gaseous emissions is not absolute. No specific trend of gaseous emissions reduction, in terms of aromatic and hydrogen content, were observed for the 18 blend ratios tested. For 50:50 blend of HEFA and Jet A-1, which meets current American Society for Testing and Materials (ASTM) specifications D7566 as drop-in fuel to D1655, the average reduction of NOX, CO, UHC emissions in PPM are ∼ 40%, 18%, and 28%, respectively. In contrast, no significant difference observed in CO2 emissions as compared with Jet A-1. Furthermore, the smoke number is proportional to the aromatic fuel content, fuel density (at 15°C), and carbon content irrespective of load condition. Conversely, the smoke number tends to be inversely proportional to the hydrogen, Sulphur, iso-paraffinic, and heat content of the fuel. Finally, these findings will contribute to the knowledge of fuel properties on impact engine performance and emissions as the aviation industry moves towards 100% SAFs.