This work reviews the current operational condition and activities on design modification for different applications of ejectors. Ejectors being a simple mechanical system capable of performing multiple fluid related functions (vacuum generation, pumping, mixing, condensing and heat exchanging), have been an essential part of several industrial processes. Two areas have been emphasized; internal flow and application-based modifications in components of ejectors. The geometry and inlet flow conditions were found to be the prime influencing factor of its performance. The objective and application-based modifications were performed on the primary nozzle, secondary nozzle, mixing chamber, throat and diffuser. The resultant performance was found to be dependent on operational condition and fluid type. This emphasizes the requirement of application-based design selection of the technology. In addition, the flow dynamics of condensing, non-condensing, particle and slurry flow has been studied based on available literatures. The one-point final objective is to identify the usability of primary water jet ejectors for active vapor transport and condensation, to replace vacuum pump and condenser in compact domestic water desalination system.
This paper explores the potential of water jet eductor to replace large condensers and vacuum pump in the thermal desalination systems, with heat source temperatures below 95 °C. The operational limit of eductor has been investigated for active vapor transport and condensation to produce permeate. Combined system and its operational principle have been proposed with critical examination based on suction performance of Eductor. Experimental and computational study are the primary methodology of this work. The computational analysis of single-phase flow in Eductor, is in proper agreement with the experimental data. The result showed primary pressure & area ratio has positive impact and swirl ratio has negative impact on suction. The extended thermal analysis summarizes strength of Eductor while working with lower temperature sources and optimum cooling capacity of proposed system. Considering the simplicity and reduction in footprint, proposed application has been highlighted. The research disseminates knowledge on maximum vacuum generation capacity of Eductor and operational limit of thermal desalination system.
About Me
Work at Hue Agriculture and Forestry University, research interest: desalination, renewable energy
Work at Hue Agriculture and Forestry University, research interest: desalination, renewable energy