Extruded crosslinked polyethylene (XLPE) submarine cables with factory joints play a significant role in cross‐sea transmission interconnection projects. Morphological variations in the insulation of submarine cables and factory joints are caused by differences in process parameters. The dielectric properties of XLPE are affected by its morphology. In this study, samples of XLPE insulating materials were taken from the cable bulk, cable–joint transition, and factory joint, respectively, of a 500 kV high‐voltage AC submarine cable. The crosslinked morphology was obtained by extraction and infrared spectrometer. The crystal morphology was obtained by the way of etchant, differential scanning calorimetry, and X‐ray diffractometry. The Weibull distribution was used to gather statistics of AC breakdown strength. The results show that in comparison with the cable bulk, the contents of crosslinked byproducts are higher in the cable–joint transition and factory joint. At the same time, there is a sparse distribution in terms of crystal morphology, with the appearance of smaller grains and lower crystallinity, in the cable–joint transition and factory joint. These morphological variations would generate more heat during electron transport and lengthen the free paths of electrons, then lead to the occurrence of AC breakdown. The results might provide insights into the optimisation of the morphology of XLPE, in particular submarine cable factory joints.
The homo-crosslinked-polyethylene (H-XLPE) bilayer simplifies the returned insulation structure of the factory joint in submarine cables, and its dielectric property is key to the reliability of the power transmission system. In this paper, we investigated the charge accumulation phenomenon in a secondary thermocompression H-XLPE bilayer using the pulse electro-acoustic method. The charge accumulation reduces its overall breakdown strength when compared with XLPE. According to X-ray diffraction measurement and thermal analysis results, the specimen forms a homo-junction region between the bilayers, which has overlapping spherulites with a thick lamella, high crystallinity, and high surface free energy. The charge accumulation can be ascribed to fused lamellas and the crystal imperfection of the homo-junction region, which restricts the charge transport process and exhibits a higher number of deep traps. This study emphasizes the importance of the homo-junction region in the H-XLPE bilayer, which should be considered in the design and operation of factory joint insulation.
28 July 2022 in International Communications in Heat and Mass Transfer
Extruded high voltage direct current (HVDC) cable with cross-linked polyethylene (XLPE) insulation is a key power device which has been widely used globally due to its advantages. However, there are many challenges in the development of HVDC XLPE cable. One of the issues in design and operation is the DC conductivity of XLPE material, which could be affected by crosslinking byproducts within the insulation. In this paper, the influence of crosslinking byproducts on the distribution and the evolution of DC conductivity of HVDC XLPE cable insulation is investigated. The content of crosslinking byproducts was obtained by Fourier transform infrared spectrum (FTIR) method and DC conductivity was measured with 20, 30 and 50 kV/ mm electric stress at 30 °C. It is found that the content of cumyl alcohol, a-methyl styrene and acetophenone exhibits spatial distribution in the insulation layer and varies with the degassing process. The byproduct content of inner insulation is in the highest level, and acetophenone decreases most significantly during the degassing. Affected by this, the conductivity demonstrates corresponding distribution profile in different insulation positions which is consistent with the byproducts distribution. The variation of conductivity during the degassing process is in accord with the decrease tendency of acetophenone, since it will greatly affect the ionic conduction in insulation. Besides, crosslinking byproducts are taking effect combined with some other factors, for instance crystallinity, degree of crosslinking of XLPE material, as well as cable construction. It is concluded that the DC conductivity of HVDC XLPE cable insulation is affected by multiple factors, and conductivity design and operation issues should be considered comprehensively related to the construction and manufacturing process of HVDC XLPE cable.
High voltage direct current (HVDC) extruded cables are developing rapidly in the last two decades and cross-linked polyethylene (XLPE) has been the preferred insulation material worldwide. The central issues in design and operation of HVDC XLPE cables are the space charge and DC conductivity characteristics, which rely on crosslinking byproducts within the insulation. Degassing process during HVDC extruded cable manufacture can efficiently reduce the crosslinking byproducts content. In this paper, the effects of degassing duration on space charge behavior and DC conductivity property in cable insulation are investigated. The space charge accumulation and DC conductivity are measured with 30 and 50kV/mm electrical stress at room temperature. It is found that hetero-charges accumulate near both electrodes in undegassed specimens, while in the preliminary stage of degassing process the amount of accumulated charges decreases and increases in the later stage. DC conductivity changes in a similar way as the space charge results. For a certain degassing time, the inner insulation layer has more charge accumulation and higher conductivity compared to middle and outer insulation layers. It can be concluded that space charge characteristics and conductivity property are first improved by degassing process and then degraded somewhat with longer degassing time; and the degassing effect of outer insulation layer is better than that of inner insulation layers. More studies should be done to find out the reasons for space charge and DC conductivity changes with degassing duration, as well as the mechanisms of the migration of crosslinking byproducts in thick insulation layer in cables.
With the rapid development of power engineering and electronic technology, high voltage direct current (HVDC) extruded cable with low loss, long lifespan, high reliability has become a rising concern, especially in China. Whereas HVDC cable holds insulation with greater thickness and longer distance than other cables, crosslinking condition of crosslinking polyethylene (XLPE) in cable extrusion and the variation of crosslinking byproducts including α-methyl styrene, acetophenone and cumyl alcohol, which have effects on the dielectric properties of cable insulation, are still in need of further research. The temperature and duration in factory degassing of HVDC cable have been handled in accordance to experience so far. In this paper, the effect of duration in factory degassing on crystallinity and crosslinking byproducts of HVDC cable insulation is studied. During the degassing, small grains are taken crystallization in outer insulation. No obvious change of crosslinking degree has taken place in HVDC cable after degassing treatment, as well as α-methyl styrene and cumyl alcohol content, while the relative content of acetophenone in crosslinking byproduct has varied significantly. And there is a variety of relative content of acetophenone in radial direction.