Natural dyes and pigments have been proposed as an eco-friendly alternative to artificial pigments. Among the diverse organisms able to synthesize natural dyes and pigments, several wood inhabiting fungi produce extracellular compounds which have been tested to dye fabrics at laboratory conditions with good results. However, the dyeing conditions used at laboratory level not necessary meet the real conditions in which dyeing of fabrics is conducted at industrial level. In this work, yellow and red dyes producing fungi, Penicillium murcianum and Talaromyces australis, respectively, were isolated from wood samples and used to dye wool fabrics at conditions of temperature, pH, additives, and equipment similar to those used at industrial level. After dyeing treatments, color fastness to washing, wet and dry rubbing, and tensile strength were tested. Satisfactory results were found when the dyes were used individually and mixed to different proportions. According to the results, natural dyes synthesized by these two wood inhabiting fungi have great potential to be used for dyeing of wool at industrial level.

Fungal isolates obtained from rotten wood samples were identified and selected by their ability to produce fungal dyes in liquid media. Fungal isolates produced natural extracellular dyes with colors ranging from red to orange, yellow and purple. Dyes from two of these fungi, Talaromyces australis (red) and Penicillium murcianum (yellow), were extracted and used to dye wool samples in a Data Color Ahiba IR Pro-Trade (model Top Speed II) machine. The protein nature of wool interacted well with the fungal dyes producing colors suitable for textile applications when used to a concentration of 0.1 g·L⁻¹. Results on color fastness when washing confirmed the affinity of the dyes with wool as the dyed samples kept their color in acceptable ranges after washing, without the implementation of mordanting pretreatments or the use of fixing agents.

In this study, a novel method for calcium carbonate deposition in wood that increases carbon dioxide concentration and fire resistance is proposed. The method promoted the mineralization of radiata pine wood microstructure with calcium carbonate by using a process consisting in the vacuum impregnation of wood with a calcium chloride aqueous solution and the subsequent sequential diffusion of gaseous ammonium and carbon dioxide. In the most favorable conditions, the method yielded a weight gain of about 20 wt.% due to mineralization, which implied the accumulation of 0.467 mmol·g⁻¹ of carbon dioxide in the microstructure of wood. In addition, a weight gain of about 8% was sufficient to provide fire resistance to a level similar to that achieved by a commercially available fire-retardant treatment. The feasibility of retaining carbon dioxide directly inside the wood microstructure can be advantageous for developing wood products with enhanced environmental characteristics. This method can be a potential alternative for users seeking materials that could be effective at supporting a full sustainable development.