Viviana Bressi

Dr. Viviana Bressi

Research Department, Universidad ECOTEC, Samborondón, Guayas, Ecuador
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 April 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Viviana BressiViviana Bressi
Viviana Bressi
AFAngelo Ferlazzo
Angelo Ferlazzo
Daniela IannazzoDaniela Iannazzo
Daniela Iannazzo
Claudia EsproClaudia Espro
Claudia Espro
The continuous decrease in the availability of fossil resources, along with an evident energy crisis, and the growing environmental impact due to their use, has pushed scientific research towards the development of innovative strategies and green routes for the use of renewable resources, not only in the field of energy production but also for the production of novel advanced materials and platform molecules for the modern chemical industry. A new class of promising carbon nanomaterials, especially graphene quantum dots (GQDs), due to their exceptional chemical-physical features, have been studied in many applications, such as biosensors, solar cells, electrochemical devices, optical sensors, and rechargeable batteries. Therefore, this review focuses on recent results in GQDs synthesis by green, easy, and low-cost synthetic processes from eco-friendly raw materials and biomass-waste. Significant advances in recent years on promising recent applications in the field of electrochemical sensors, have also been discussed. Finally, challenges and future perspectives with possible research directions in the topic are briefly summarized.

19 November 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ASAntonella Satira
Antonella Satira
Emilia PaoneEmilia Paone
Emilia Paone
Viviana BressiViviana Bressi
Viviana Bressi
Daniela IannazzoDaniela Iannazzo
Daniela Iannazzo
FMFederica Marra
Federica Marra
Claudia EsproClaudia Espro
Claudia Espro
In this study, a simple and green protocol to obtain hydrochar and high-added value products, mainly 5-hydroxymethylfurfural (5-HMF), furfural (FU), levulinic acid (LA) and alkyl levulinates, by using the hydrothermal carbonization (HTC) of orange peel waste (OPW) is presented. Process variables, such as reaction temperature (180–300 °C), reaction time (60–300 min), biomass:water ratio and initial pH were investigated in order to find the optimum conditions that maximize both the yields of solid hydrochar and 5-HMF and levulinates in the bio-oil. Data obtained evidence that the highest yield of hydrochar is obtained at a 210 °C reaction temperature, 180 min residence time, 6/1 w/w orange peel waste to water ratio and a 3.6 initial pH. The bio-products distribution strongly depends on the applied reaction conditions. Overall, 180 °C was found to be the best reaction temperature that maximizes the production of furfural and 5-HMF in the presence of pure water as a reaction medium.

25 January 2022 in Sensors
Verified
Journal Article
Open access
PDF file
Viviana BressiViviana Bressi
Viviana Bressi
ZAZahra Akbari
Zahra Akbari
MMMorteza Montazerozohori
Morteza Montazerozohori
AFAngelo Ferlazzo
Angelo Ferlazzo
Daniela IannazzoDaniela Iannazzo
Daniela Iannazzo
Giovanni  NeriGiovanni Neri
Giovanni Neri
A novel bidentate Schiff base (L) is here proposed for the detection of Zn ions in water. The structure of the synthesized Schiff base L was characterized by FT-IR, 1H NMR and 13C NMR. Optical characteristics were addressed by UV-Visible spectroscopy and Photoluminescence (PL) measurements. PL demonstrated that L displays a “turn-off” type fluorescence quenching in the presence of Zn2+ ion in aqueous solution, indicating its ability to preferentially coordinate this ion. Based on these findings, an L-M (where M is a suitable membrane) modified screen-printed carbon electrode (SPCE) was developed to evaluate the electrochemical behavior of the Schiff base (L) with the final objective of undertaking the electroanalytical determination of Zn ions in water. Using various electrochemical techniques, the modified L-M/SPCE sensor demonstrates high sensitivity and selectivity to Zn ions over some common interferents ions, such as Ca2+, Mg2+, K+, Ni++ and Cd++. The potentiometric response of the L-M/SPCE sensor to Zn ions was found to be linear over a relatively wide concentration range from 1 μM to 100 mM.

6 July 2023 in RSC Sustainability
Verified
Journal Article
Open access
PDF file
Damiano SpagnuoloDamiano Spagnuolo
Damiano Spagnuolo
DID. Iannazzo
D. Iannazzo
TLT. Len
T. Len
ABAlina Balu
Alina Balu
MMM. Morabito
M. Morabito
Viviana BressiViviana Bressi
Viviana Bressi
In this study, an environmentally friendly protocol for the recovery of hydrochar by hydrothermal carbonization (HTC) of the macroalga Sargassum muticum was presented. HTC conditions such as temperature (180–300 °C) and reaction time (60–300 min) were investigated to study the differences between the obtained samples and find the optimal conditions that maximize the yield of hydrochar. The acquired results demonstrate that the highest hydrochar yield is reached after 180 min at a reaction temperature of 180 °C. The obtained biocarbons were characterized by several techniques (XRD, FTIR, XPS, SEM-EDX, and BET) and their adsorption capability was evaluated in the environmental recovery of water organic pollutants.

27 September 2022 in Green Chemistry
Verified
Journal Article
Closed access
PDF file
TLThomas Len
Thomas Len
Viviana BressiViviana Bressi
Viviana Bressi
ABAlina Balu
Alina Balu
TKTetiana Kulik
Tetiana Kulik
OLENA KORCHUGANOVAOLENA KORCHUGANOVA
OLENA KORCHUGANOVA
Rafael LuqueRafael Luque
Rafael Luque
The total annual production of agricultural biomass such as wood, corn cobs, leaves, and citrus peels, is estimated at 956 million tons (Mt). Since crop residues are by-products of agricultural production, crop residue collection does not compete with food crops for acreage and therefore, it does not negatively impact food prices. Moreover, it has the advantage of reducing the amount of waste, the disposal of which often becomes a serious problem despite natural sources. Biomass conversion becomes a very valid alternative to diversify energy sources and reduce global warming. Thermochemical treatment of biomass is a promising way to convert biomass into bio-oil, biochar, and gas. In recent years, interest in the conversion of plant biomass into biochar has increased because this carbonaceous material has interesting properties that guarantee applications in wastewater treatment, soil improvement, solid fuels, and energy. The processes performed to convert biomass into biochar are different and the most used are thermochemical processes: pyrolysis, torrefaction, hydrothermal treatment, and gasification. The studies of the thermokinetic parameters that control these processes are carried out using different methods that provide the necessary information for the applicability of the processes on an industrial scale. One of the objectives of the present review is to compare kinetic models in order to clarify the role of the conversion process and the effects of the process parameters on the final product. A comprehensive investigation of the thermokinetic parameters controlling the conversion of crop residues to biochar was conducted. The mathematical description of kinetic processes is usually performed using the Arrhenius equation and its derivatives to obtain the activation energies (Ea), the pre-exponential parameter, and the process mechanisms. While isothermal processes can be described using the model fitting method, isoconversional processes can be studied using both the model fitting method and model-free methods. The high complexity and diversity of the reactions involved could lead to the use of approximations. In this paper, an overview of the kinetic parameters determined for biochar production processes and the model used to determine them is given.

6 July 2023 in Chemosensors
Verified
Journal Article
Open access
PDF file
MKMadiha Khan
Madiha Khan
KAkhouloud ABID
khouloud ABID
AFAngelo Ferlazzo
Angelo Ferlazzo
Viviana BressiViviana Bressi
Viviana Bressi
Claudia EsproClaudia Espro
Claudia Espro
Giovanni  NeriGiovanni Neri
Giovanni Neri
In the present work, a study was carried out with the aim of enhancing the performance of electrochemical biosensors based on Co3O4:Fe2O3 heterojunctions. Specifically, the redox behavior of screen–printed carbon electrodes (SPCEs) modified with Co3O4:Fe2O3 (0.5 wt%:x wt%) nanocomposites, where x ranged from 0.1 to 0.5 wt%, was examined in detail. The hybrid nanocomposites were synthesized using the sol-gel auto-combustion method. Several characterization methods were performed to investigate the morphology, microstructure, and surface area of the pure Co3O4, pure Fe2O3, and the synthesized Co3O4:Fe2O3 nanocomposites. Using cyclic voltammetry (CV) tests, the electrochemical behavior of the modified electrodes toward the dopamine (DA) molecules was investigated. The modified Co3O4:Fe2O3, (0.5 wt%, x = 0.4 wt%)/SPCE resulted in a sensor with the best electrochemical performance toward DA. A high linear relationship between DA concentrations and the faradic current variation (ipa (μA) = 0.0736 + 0.1031 CDA (μA) and R2 = 0.99) was found in the range of 10–100 μM. The sensitivity value was computed to be 0.604 µA µM−1cm−2 and the limit of detection (LOD) 0.24 µM. Based on the characterization and electrochemical results, it can be suggested that the formation of Co3O4:Fe2O3 heterostructures provides a large specific surface area, an increased number of electroactive sites at the metal oxide interface and a p–n heterojunction, thus ensuring a remarkable enhancement in the electrochemical response towards DA.