In the present work, a study was carried out with the aim of enhancing the performance of electrochemical biosensors based on Co3O4:Fe2O3 heterojunctions. Specifically, the redox behavior of screen–printed carbon electrodes (SPCEs) modified with Co3O4:Fe2O3 (0.5 wt%:x wt%) nanocomposites, where x ranged from 0.1 to 0.5 wt%, was examined in detail. The hybrid nanocomposites were synthesized using the sol-gel auto-combustion method. Several characterization methods were performed to investigate the morphology, microstructure, and surface area of the pure Co3O4, pure Fe2O3, and the synthesized Co3O4:Fe2O3 nanocomposites. Using cyclic voltammetry (CV) tests, the electrochemical behavior of the modified electrodes toward the dopamine (DA) molecules was investigated. The modified Co3O4:Fe2O3, (0.5 wt%, x = 0.4 wt%)/SPCE resulted in a sensor with the best electrochemical performance toward DA. A high linear relationship between DA concentrations and the faradic current variation (ipa (μA) = 0.0736 + 0.1031 CDA (μA) and R2 = 0.99) was found in the range of 10–100 μM. The sensitivity value was computed to be 0.604 µA µM−1cm−2 and the limit of detection (LOD) 0.24 µM. Based on the characterization and electrochemical results, it can be suggested that the formation of Co3O4:Fe2O3 heterostructures provides a large specific surface area, an increased number of electroactive sites at the metal oxide interface and a p–n heterojunction, thus ensuring a remarkable enhancement in the electrochemical response towards DA.
The work reports the development of an AuNPs-L1/SPCE sensor based on a novel L1 Schiff base, with enhanced Pb2+ sensitivity and LOD of 0.298 μM. The sensor is suitable for Pb2+ detection in seawater with no sample treatment.
Ag2O-loaded Co3O4 composites (Ag2O/Co3O4) were prepared by the sol–gel auto-combustion method. Their morphology, microstructure, and textural properties were characterized by scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), and Brunauer–Emmett–Teller (BET) analysis. The composites were evaluated as conductometric sensors for hydrogen (H2). The Ag2O/Co3O4−0.5 sensor showed an enhanced response to H2 over the investigated concentration range of 2000–10,000 ppm at an optimal operating temperature of 125 °C compared with pure Co3O4. The electrocatalytic activity of the composites was also investigated after spray-coating them onto screen-printed carbon electrodes (SPCEs). Cyclic voltammetry (CV) showed an enhanced response to uric acid for the Ag2O/Co3O4−1.0/SPCE compared with Co3O4/SPCE, with a sensitivity of 2.6 μA μM−1 cm−2, satisfactory reproducibility and stability, and a limit of detection (LoD) of 147 nM. These findings suggest that Ag2O/Co3O4 composites are promising materials for both gas and electrochemical sensing.