Polymer coatings based on polycations represent a perspective class of protective antimicrobial coatings. Polydiallyldimethylammonium chloride (PDADMAC) and its water-soluble complexes with sodium polystyrenesulfonate (PSS) were studied by means of dynamic light-scattering, laser microelectrophoresis and turbidimetry. It was shown that addition of six mol.% of polyanion to polycation results in formation of interpolyelectrolyte complex (IPEC) that was stable towards phase separation in water-salt media with a concentration of salts (NaCl, CaCl₂, Na₂SO₄, MgSO₄) up to 0.5 M. Most of the polyelectrolyte coatings are made by layer-by-layer deposition. The utilization of water-soluble IPEC for the direct deposition on the surface was studied. The coatings from the PDADMAC and the PSS/PDADMAC complex were formed on the surfaces of hydrophilic glass and hydrophobic polyvinylchloride. It was found that formation IPEC allows one to increase the stability of the coating towards wash-off with water in comparison to individual PDADMAC coating on both types of substrates. The visualization of the coatings was performed by atomic force microscopy and scanning electron microscopy.

In this work, the preparation procedure and properties of anionic magnetic microgels loaded with antitumor drug doxorubicin are described. The functional microgels were produced via the in situ formation of iron nanoparticles in an aqueous dispersion of polymer microgels based on poly(N-isopropylacrylamide-co-acrylic acid) (PNIPAM-PAA). The composition and morphology of the resulting composite microgels were studied by means of X-ray diffraction, Mössbauer spectroscopy, IR spectroscopy, scanning electron microscopy, atomic-force microscopy, laser microelectrophoresis, and static and dynamic light scattering. The forming nanoparticles were found to be β-FeO(OH). In physiological pH and ionic strength, the obtained composite microgels were shown to possess high colloid stability. The average size of the composites was 200 nm, while the zeta-potential was −27.5 mV. An optical tweezers study has demonstrated the possibility of manipulation with microgel using external magnetic fields. Loading of the composite microgel with doxorubicin did not lead to any change in particle size and colloidal stability. Magnetic-driven interaction of the drug-loaded microgel with model cell membranes was demonstrated by fluorescence microscopy. The described magnetic microgels demonstrate the potential for the controlled delivery of biologically active substances.

Due to the presence of cationic units interpolyelectrolyte complexes (IPECs) can be used as a universal basis for preparation of biocidal coatings on different surfaces. Metallopolymer nanocomposites were successfully synthesized in irradiated solutions of polyacrylic acid (PAA) and polyethylenimine (PEI), and dispersions of non-stoichiometric IPECs of PAA–PEI containing silver ions. The data from turbidimetric titration and dynamic light scattering showed that pH 6 is the optimal value for obtaining IPECs. Metal polymer complexes based on IPEC with a PAA/PEI ratio equal to 3/1 and 1/3 were selected for synthesis of nanocomposites due to their aggregative stability. Studies using methods of UV–VIS spectroscopy and TEM have demonstrated that the size and spatial organization of silver nanoparticles depend on the composition of polymer systems. The average sizes of nanoparticles are 5 nm and 20 nm for complexes with a molar ratio of PAA/PEI units equal to 3/1 and 1/3, respectively. The synthesized nanocomposites were applied to the glass surface and exhibited high antibacterial activity against both gram-positive (Staphylococcus aureus) and gram-negative bacteria (Salmonella). It is shown that IPEC-Ag coatings demonstrate significantly more pronounced biocidal activity not only in comparison with macromolecular complexes of PAA–PEI, but also coatings of PEI and PEI based nanocomposites.

Positively charged polyelectrolytes hold significant potential as materials for creating antibacterial coatings. We examined the physicochemical and mechanical properties of the macromolecules in water solutions and in coatings for the series of branched polyethyleneimine (PEI) and linear polydiallyldimethylammonium chloride (PDADMAC) with different molecular weights. The microbiological study was conducted to analyze the biocidal activity of the polycation solutions and coatings towards foodborne bacteria. While the moisture saturation of the polycationic coatings and biocidal activity did not significantly depend on the chemical nature of charged groups or the molecular weight or architecture of macromolecules, the lowering of the molecular weight of polymers resulted in the loss of cohesive forces in the coatings and to a dramatic loss of stability when being washed off with water. The diffusion coefficient (D₀) of macromolecules was identified as a key parameter for the wash-off mechanism. Films formed by molecules with a D₀ below 1 × 10⁻⁷ cm²/s demonstrated a high resistance to wash-off procedures. We demonstrated that PEI and PDADMAC samples with high molecular weights showed high antimicrobial activity towards L. monocytogenes. Our results highlight the importance of macromolecule characteristics in the development of new biocidal coatings based on polycations.

A facile technique for the preparation of mixed polylactide micelles from amorphous poly-D,L-lactide-block-polyethyleneglycol and crystalline amino-terminated poly-L-lactide is described. In comparison to the classical routine solvent substitution method, the ultrasonication assisted formation of polymer micelles allows shortening of the preparation time from several days to 15–20 min. The structure and morphology of mixed micelles were analyzed with the assistance of electron microscopy, dynamic and static light scattering and differential scanning calorimetery. The resulting polymer micelles have a hydrodynamic radius of about 150 nm and a narrow size distribution. The average molecular weight of micelles was found to be 2.1 × 10⁷ and the aggregation number was calculated to be 6000. The obtained biocompatible particles were shown to possess low cytotoxicity, high colloid stability and high stability towards enzymatic hydrolysis. The possible application of mixed polylactide micelles as drug delivery vehicles was studied for the antitumor hydrophobic drug paclitaxel. The lethal concentration (LC50) of paclitaxel encapsulated in polylactide micelles was found to be 42 ± 4 µg/mL—a value equal to the LC50 of paclitaxel in the commercial drug Paclitaxel-Teva.