Alkali-activated materials are alternative building binders, where secondary raw materials are processed. The possibility of using landfilled waste materials in the building industry increases their potential application in construction practice, and they are therefore subject to extensive research, especially in recent years. This paper briefly summarizes the interesting results of an experiment aimed at verifying the possibility of applying cement by-pass dust (CBPD) in the preparation of alkali-activated materials. The research was focused on the possibilities of using these wastes for the preparation of small elements of garden architecture. This work also briefly summarized the interesting results of an experiment aimed at verifying the possibility of applying cement by-pass dust (CBPD) in the preparation of alkali-activated materials. In the experiment, a mixture of blast furnace granulated slag, fly ash and cement by-pass dust was alkali activated with sodium metasilicate.

Brownfields have been the subject of research, evaluation, categorization and, of course, redevelopment for many years. The ABC(D) model (an assessment tool to identify different types of sites in terms of their potential) by the Concerted Action on Brownfield and Economic Regeneration Network (CABERNET) has been mentioned in many publications. The aim of the assessment method presented in this article is to use the basic essence of the categories in the ABC(D) model and to use our own very simple criteria. Our criteria are the result of many years of experience in the creation and management of the brownfield database. In 2017, the development potential of selected brownfields in the database of the Moravian-Silesian region (Czech Republic) was evaluated using our proposed procedure (three objective and one subjective criterion). In 2020, verification of the categories in regard to how correctly or incorrectly they were proposed was carried out. The results from this verification, including reasons for the accompanying inaccuracies, are a part of this article. We verified that the very simple evaluation procedure we proposed is functional and can be applied by database administrators continuously without the need to create complex datasets and statistical evaluations.

Cities are facing the challenges of climate change. The application of nature-based solutions (NBS) to the urban structure is often mentioned in climate change adaptation strategies. In an effort to ensure the greatest possible well-being of citizens in the form of environmentally positive elements, the opinions of citizens are forgotten. This paper presents the results of research focusing on the feelings of unsafety associated with the application of NBS elements directly into the urban structure. In two pilot areas (Ostrava (CZ) and the part of Upper Silesian agglomeration (PL)) the feelings of the inhabitants and the possible feeling of fear or danger in the application of NBS were investigated. In Ostrava, a questionnaire survey was conducted in relation to specific elements of the NBS without discussion of specific locations. In the Upper Silesian agglomeration, residents’ feelings about specific NBS were surveyed at specific locations using guided interviews. Both approaches resulted in the identification of elements of concern. Respondents who discussed a specific location had a better understanding of the urban context and worried less. The two approaches demonstrated the need to communicate with residents before finalizing the design of a particular public space and the desirability of discussing site-specific issues with citizens.

The results of ground granulated blast furnace slag (GGBS) tests in alkali-activated systems show that, with its use, it is possible to produce promising materials with the required properties. Unfortunately, GGBS is becoming a scarce commodity on the market, so the effort is to partially replace its volume in these materials with other secondary materials, while maintaining the original properties. This paper focuses on a comparison of two basic types of mixtures. The first mixture was prepared only from ground granulated blast furnace slag (GGBS) and the second type of mixture was prepared with admixtures, where the admixtures formed a total of 30% (15% of the replacement was fly ash after denitrification—FA, and 15% of the replacement was cement by-pass dust—CBPD). These mixtures were prepared with varying amounts of activator and tested. The experiment monitored the development of strength over time and the influence of different types of aggressive environments on the strength characteristics. Thermal analysis and FTIR were used in the experiment to determine the degradation products. The paper provides an interesting comparison of the resistance results of different composites in aggressive environments and at the same time an evaluation of the behavior of individual mixtures in different types of aggressive environment. After 28 days of maturation, the highest strengths were obtained with mixtures with the lowest doses of activator. The difference in these compressive strengths was around 25% in favor of the mixtures with only GGBS; in the case of flexural strength, this difference was around 23%. The largest decreases in strength were achieved in the XA3 environment. This environment contains the highest concentration of sulfate ions according to the EN 206-1 standard. The decreases in compressive strength were 40–45%, compared to the same old reference series. The surface degraded due to sulfate ions. Calcium sulphate dihydrate was identified by FTIR, thermal analysis and SEM as a degradation product.

Brownfields sometimes represent a development problem but at the same time also hold development potential. With accurate and up-to-date information it is possible to assure the regeneration process is effective; therefore we investigated in detail the development of the process of brownfields management in two countries: Slovenia and the Czech Republic (the Moravian-Silesian Region). The article compares the process of development of databases and the data itself in both selected case studies, and evaluates and identifies the patterns of change in brownfields with a focus on regenerated sites. In the period 2017–2022 we have noticed a growing number of brownfields included in databases in both selected cases, despite the share of regenerated brownfield sites that have been excluded from the database. Both study cases show that ensuring continuity of work in the process of monitoring brownfields and knowledge transfer are critical for sustainable brownfield management and successful regeneration. Based on the comparisons, recommendations are summarised on how to make the database an effective tool that could be relevant to more sustainable brownfield development and land recycling.

This article deals with the possibility of using cement by-pass dust (CBPD) in the garden architecture elements, specifically in curbs for park use. To increase the positive effect on the environment, other secondary raw materials were also used in the research, specifically blast furnace granulated slag and silica fly ash. Mixtures were based on alkali activation, where cement as a binder was 100% replaced by raw materials with waste properties. In the research, properties of used materials and also the basic physical-mechanical and durability properties of prepared mixtures were determined Part of the research focused on the effect of the tested beams on the grassland planted around the beams. Any significant negative impact was not registered, except for low pH increase of soil. Infrared spectroscopy and thermal analysis were performed on selected samples. Testing has shown that the products are in accordance with the Czech standard requirements for concrete curbs in garden architecture. The samples did not pass only the scaling test, which is, however, a condition for concrete curbs used for roads. For garden architecture this test is not required.