The new Ku-band scatterometer (HSCAT-B) onboard the HY-2B satellite was launched on October 25, 2018, and soon after the C-band scatterometer (Advanced Scatterometer (ASCAT)-C) onboard the MetOp-C satellite was launched on November 6, 2018. This article aims to validate the new sea surface wind products from them, and also to summarize the common issues in current scatterometer wind products. Thus, other scatterometer data are also used for comparisons, including the C-band MetOp-B/ASCAT, and Ku-band SCATSAT-1/OSCAT2 and HY-2A/SCAT winds. In this study, the C-band and Ku-band scatterometer wind products were each reproduced using the same procedures, in terms of backscatter calibration, wind retrieval, and quality control. The scatterometer winds are compared to the European Centre for Medium-Range Weather Forecasts (ECMWF) ERA5 winds or buoy winds, and the results show that the quality of ASCAT-C winds is almost the same as the well-known ASCAT-B; the HSCAT-B winds show quite good quality and similar validating statistics as ASCAT winds. Noticeable wind-speed-dependent biases are found in all Ku-band scatterometer winds, which suggests that refinements are needed for the NSCAT-4 geophysical model function, especially in terms of wind speed dependence for all incidence angles.

The Chinese HY-2C satellite was launched on Sep. 21, 2020, carrying the new Ku-band scatterometer (HSCAT-C). Different from the other currently operating scatterometers, the HSCAT-C is in a nonsun-synchronous orbit and as such it will be useful for the cross-calibration of sea surface wind products from current space-borne scatterometers and radiometers. In this article, the HSCAT-C wind products are validated by comparing to collocated winds from buoys, European Centre for Medium-Range Weather Forecasts model, and several other scatterometers. The results show that the quality of HSCAT-C winds is very good: in comparison with buoy winds, the wind speed standard deviation and direction root-mean-square error are 1.03 m/s and 15.9°, respectively. The HSCAT-C winds show very good agreements with the HSCAT-B winds, especially in the range of [4, 17] m/s. In addition, as HSCAT-C is a rotating pencil-beam scatterometer, some common error characteristics are also clearly found in the wind products. Based on the validation results and existing scatterometer application experience, it is believed that the availability of the HSCAT-C wind product would greatly benefit the scientific and user community.

The Chinese HY-2D satellite was launched on 19 May 2021, carrying a Ku-band scatterometer. Together with the operating scatterometers onboard the HY-2B and HY-2C satellites, the HY-2 series scatterometer constellation was built, constituting different satellite orbits and hence opportunity for mutual intercomparison and intercalibration. To achieve intercalibration of backscatter measurements for these scatterometers, this study presents and performs three methods including: (1) direct comparison using collocated measurements, in which the nonlinear calibrations can also be derived; (2) intercalibration over the Amazon rainforest; (3) and the double-difference technique based on backscatter simulations over the global oceans, in which a geophysical model function and numerical weather prediction (NWP) model winds are needed. The results obtained using the three methods are comparable, i.e., the differences among them are within 0.1 dB. The intercalibration results are validated by comparing the HY-2 series scatterometer wind speeds with NWP model wind speeds. The curves of wind speed bias for the HY-2 series scatterometers are quite similar, particularly in wind speeds ranging from 4 to 20 m/s. Based on the well-intercalibrated backscatter measurements, consistent sea surface wind products from HY-2 series scatterometers can be produced, and greatly benefit data applications.