The HY-2B satellite was successfully launched on 25 October 2018. One of the main payloads of the HY-2B was a radar altimeter. In the present study, the quality of the HY-2B along-track sea surface heights (SSH), significant wave heights (SWH), and sea surface wind speeds (SSWS) were assessed, including their precision and accuracy. In order to achieve this goal, the mono-mission metrics of the HY-2B were analyzed and compared with those of the Jason-2 and Jason-3 over the same periods of time. The results of both direct comparison and cross comparison methods were presented in this study. The comparison results indicated that the quality of the HY-2B satellite’s geophysical data records (GDRs) data was excellent, with 95% of the sea surfaces effectively observed between 82 degrees north and south latitudes. In addition, the standard deviation of the sea level anomalies (SLA) at the single mission crossovers was 4.6 cm to 5.8 cm, and at the dual-crossovers with Jason-3, the standard deviation was determined to be 5.1 cm to 5.8 cm. The accuracy levels of the significant wave heights and products of the HY-2B satellite radar altimeter were observed to be greater than 0.3 m and 1.4 m/s (STD), respectively. Therefore, it was concluded in this study that the data quality and system performance of the HY-2B satellite were excellent and stable, and could be widely utilized in such fields as global sea-level change monitoring, wave numerical assimilation predictions etc.
HY2B is now the latest altimetry mission that provides global nadir significant wave height (SWH) and sea surface wind speed. The validation and calibration of HY2B are carried out against National Data Buoy Center (NDBC) buoy observations from April 2019 to April 2020. In general, the HY2B altimeter measurements agree well with buoy observation, with scatter index of 9.4% for SWH, and 15.1% for wind speed. However, we observed a significant bias of 0.14 m for SWH and −0.42 m/s for wind speed. A deep learning technique is novelly applied for the calibration of HY2B SWH and wind speed. Deep neural network (DNN) is built and trained to correct SWH and wind speed by using input from parameters provided by the altimeter such as sigma0, sigma0 standard deviation (STD). The results based on DNN show a significant reduction of the bias, root mean square error (RMSE), and scatter index (SI) for both SWH and wind speed. Several DNN schemes based on different combination of input parameters have been examined in order to obtain the best model for the calibration. The analysis reveals that sigma0 STD is a key parameter for the calibration of HY2B SWH and wind speed.
The Chinese HY-2D satellite was launched on 19 May 2021, carrying a Ku-band scatterometer. Together with the operating scatterometers onboard the HY-2B and HY-2C satellites, the HY-2 series scatterometer constellation was built, constituting different satellite orbits and hence opportunity for mutual intercomparison and intercalibration. To achieve intercalibration of backscatter measurements for these scatterometers, this study presents and performs three methods including: (1) direct comparison using collocated measurements, in which the nonlinear calibrations can also be derived; (2) intercalibration over the Amazon rainforest; (3) and the double-difference technique based on backscatter simulations over the global oceans, in which a geophysical model function and numerical weather prediction (NWP) model winds are needed. The results obtained using the three methods are comparable, i.e., the differences among them are within 0.1 dB. The intercalibration results are validated by comparing the HY-2 series scatterometer wind speeds with NWP model wind speeds. The curves of wind speed bias for the HY-2 series scatterometers are quite similar, particularly in wind speeds ranging from 4 to 20 m/s. Based on the well-intercalibrated backscatter measurements, consistent sea surface wind products from HY-2 series scatterometers can be produced, and greatly benefit data applications.
The purpose of our work is to investigate the performance of fusion wind from multiple remote-sensed data in forcing numeric wave models, and the experiment is described herein. In this study, 0.125° gridded wind fields at 12 h intervals were fused by using swath products from an advanced scatterometer (ASCAT) (a Haiyang-2B (HY-2B) scatterometer) and a spaceborne polarimetric microwave radiometer (WindSAT) during the period November 2019 to October 2020. The daily average wind speeds were compared with observations from National Data Buoy Center (NDBC) buoys from the National Oceanic and Atmospheric Administration (NOAA), yielding a 1.66 m/s root mean squared error (RMSE) with a 0.81 correlation (COR). This suggests that fusion wind was reliable for our work. The fusion winds were used for hindcasting sea surface waves by using two third-generation numeric wave models, denoted as WAVEWATCH-III (WW3) and Simulation Wave Nearshore (SWAN). The WW3-simulated waves in the North Pacific Ocean and the SWAN-simulated waves in the Gulf of Mexico were validated against the measurements from the NDBC buoys and the European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis (ERA-5) for the period June−September 2020. The analysis of significant wave heights (SWHs) up to 9 m yielded a < 0.5 m RMSE with a > 0.8 COR for the WW3 and SWAN models. Therefore, it was believed that the accuracy of the simulation using the two numeric models was comparable with that forced by a numeric atmospheric model. An error analysis was systematically conducted by comparing the modeled WW3-simulated SWHs with the monthly average products from the HY-2B and a Jason-3 altimeter over global seas. The seasonal analysis showed that the differences in the SWHs (i.e., altimeter minus the WW3) were within ±1.5 m in March and June; however, the difference was quite significant in December. It was concluded that remote-sensed fusion wind can serve as a driving force for hindcasting waves using numeric wave models.
16 September 2024 in IEEE Transactions on Geoscience and Remote Sensing
Sea surface temperature (SST) measurements are crucial in the context of climate change. Microwave SST measurements are currently provided by radiometers operating in the C and X bands. In-orbit K and Ka-band payloads lack the commonly-used C and X bands for SST retrieval. We present the K-KaSSTNet, a residual neural network that, for the first time, uses the K and Ka microwave bands with much weaker SST response than C and X bands for SST retrieval. Despite training on a limited dataset from 2020 and 2021, K-KaSSTNet consistently achieves reasonable accuracy SST retrievals for data spanning 2017 to 2022. Moreover, by using deep learning interpretability methods, we have unveiled the underlying mechanisms driving K-KaSSTNet. When extended to the Special Sensor Microwave Imager/Sounder (SSMIS) and Calibration Microwave Radiometers (CMR)-payloads typically not used for SST retrieval-the K-KaSSTNet model maintains SST retrievals with reasonable accuracy compared with Advanced Microwave Scanning Radiometer-2 (AMSR-2). This extension broadens the spatiotemporal coverage of microwave SST products and enhances the temporal sampling frequency and continuity of microwave SST measurements.
6 March 2026 in IEEE Transactions on Geoscience and Remote Sensing
Operational satellite retrieval of the maximum wave height (MWH) has long relied on linear wave theory, which estimates MWH as a fixed multiple of significant wave height (SWH). This static approach fails to capture the dynamic nonlinearity of real ocean waves, leading to systematic biases. In this study, we introduce a novel physics-based method that synergistically uses active and passive microwave observations from the Global Precipitation Measurement (GPM) mission to correct SWH dynamically and retrieve MWH directly. A dynamic correction factor is constructed from GMI brightness temperature—sensitive to wind induced energy input—and DPR radar backscatter—sensitive to wave steepness and nonlinear dissipation—thereby quantitatively diagnosing wave nonlinearity. Validated against 217 independent buoy observations, the proposed GPM MWH retrieval reduces the root mean square error (RMSE) and mean absolute error (MAE) by approximately 34% and 35%, respectively, compared to the ERA5 MWH product. This method demonstrates the feasibility of generating continuous, high resolution global MWH fields, offering a new pathway toward the operational monitoring of extreme ocean waves from space.