Ground Granulated Blast-Furnace Slag (GGBS) and silica fume (SF) are frequently utilized in gel materials to produce environmentally sustainable concrete. The blend of the two components contributes to an enhancement in the pore structure, which, in turn, increases the mechanical strength of the material and the compactness of the pore structure and decreases the permeability, thereby improving the durability of the concrete. In this study, the pore structures of GGBS and SF blends are assessed using Nuclear Magnetic Resonance (NMR) and Mercury Intrusion Porosimetry (MIP) tests. These methodologies provide a comprehensive evaluation of the effect of GGBS and SF on the pore structure of cementitious materials. Results showed that the addition of SF and GGBS reduces the amount of micro-capillary pores (10 < d < 100 nm) and the total pore volume. The results indicate that the transport properties are related to the pore structure. The incorporation of SF reduced the permeability of the concrete by an order of magnitude. The pore distribution and pore composition had a significant effect on the gas permeability. The difference in porosity obtained using the MIP and NMR tests was large due to differences in testing techniques.
28 September 2023 in Journal of Building Engineering
The effects of confining pressure are investigated for two samples of a macro-cracked concrete. Samples are first macro-cracked with a splitting tensile strength test (Brazilian) technique. Gas permeability is continually measured under increasing (or decreasing) confining pressure, whereas crack closure (or opening) is recorded with an LVDT (Linear Variable Differential Transformer) device. Despite a mechanical closure of the macro-crack, identified at around 20 MPa confining pressure, gas permeability continues to decrease as confinement is increased. This means that a model of the macro-crack by two parallel planes (using Poiseuille law) cannot be used to represent permeability variations during closure (or opening) of cracks. As a consequence, a physical model is designed in order to simulate with a better consistency the real behaviour of the macro-crack. This simple modelling allows both behaviours, mechanical and hydraulic, under confining pressure, to be simulated with the same set of parameters.
Currently, most cities landfill most waste glass, resulting in the waste of resources and environmental pollution. Therefore, to realize the recycling of waste glass, solid waste glass was recycled and broken. Waste glass sand was prepared according to the gradation of natural river sand particles and the fineness modulus screening. It was used as an alternative material to natural river sand and mixed with mortar materials with different replacements. Analysis of the mortar with different replacements (0%, 20%, 40%, 60%, 80%) was conducted by combining macro and micro tests on the change law and influence mechanism of permeability, mechanical properties, and microstructure. The results showed that: the replacement of waste glass sand effectively improved the gas permeation resistance of mortar; with the increase of replacement, the gas permeation resistance of mortar roughly showed a trend of increasing first and then decreasing. The replacement of waste glass sand at 20% can better promote cement’s hydration so that the mortar’s porosity is reduced by 16.5%. The gas permeability decreases by 57.4%; the compressive strength increases by 3%, and the elastic modulus increases by 5.9%. When the replacement rate of glass sand is 20%, the test performance of mortar is the best among the five groups.
1 January 2024 in Fluid Dynamics & Materials Processing
This study focuses on the effect of ultrafine waste glass powder on cement strength, gas permeability and pore structure. Varying contents were considered, with particle sizes ranging from 2 to 20 μm. Moreover, alkali activation was considered to ameliorate the reactivity and cementitious properties, which were assessed by using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and specific surface area pore size distribution analysis. According to the results, without the addition of alkali activators, the performance of glass powder mortar decreases as the amount of glass powder increases, affecting various aspects such as strength and resistance to gas permeability. Only 5% glass powder mortar demonstrated a compressive strength at 60 days higher than that of the control group. However, adding alkali activator (CaO) during hydration ameliorated the hydration environment, increased the alkalinity of the composite system, activated the reactivity of glass powder, and enhanced the interaction of glass powder and pozzolanic reaction. In general, compared to ordinary cement mortar, alkali-activated glass powder mortar produces more hydration products, showcases elevated density, and exhibits improved gas resistance. Furthermore, alkali-activated glass powder mortar demonstrates an improvement in performance across various aspects as the content increases. At a substitution rate of 15%, the glass powder mortar reaches its optimal levels of strength and resistance to gas permeability, with a compressive strength increase ranging from 28.4% to 34%, and a gas permeation rate reduction between 51.8% and 66.7%.
This experimental study investigated the effect of heating rate on mortar gas permeability and microstructure. The mortar was heated to three target temperatures (400 °C, 500 °C, and 600 °C) at three heating rates (5 °C/min,10 °C/min, and 15 °C/min). The variations of gas permeability and porosity were measured simultaneously at different confining pressures, and the changes in mortar microstructure were analyzed by NMR and SEM techniques. The results show that the porosity and gas permeability increase with an increase in temperature and heating rate. The gas permeability and porosity continue to decrease as confinement is increased due to a reduction in the pore volume. The microstructure observed by SEM indicates that the high heating rate induces some microcracks at 500 °C and 600 °C. The fractal dimension based on NMR can quantitatively characterize the complexity of the mortar pore structure and shows a quadratic decreasing relationship with gas permeability and porosity.