Single-point incremental forming (SPIF) is a sheet forming technique that deforms sheet materials incrementally to a designated shape. The process has shown high ability to deform low-strength materials for good geometrical accuracy and formability at room temperature. Deforming high-temperature alloys, such as high-strength steels and Ti-6AI-4 V, requires integrated heat sources to increase the ductility of the metal sheets for deformation. However, the integration of heating results in unpredictable thermal behaviours and impacts the formability, geometric accuracy, thickness distribution and surface quality. Considerable research efforts have invented different heating methods and designed novel tools and analytical modelling to resolve the limitations. The current challenge remains improving the localised and stable heating, functional tool design to reduce the thermal expansion and friction at the tool-surface contact area and the analysis of relationship between thermal and mechanical effects. This study aims to review the heating-assisted SPIF systems for high-strength alloy sheets to solve the current limitations. The method includes analysis of heating systems, tool, tool path design, lubricants and macro- and micro-numerical analyses. Additionally, the study aims to correlate the microstructural properties to the mechanical behaviours and subsequent effects on forming force, strain, springback, geometrical accuracy and surface quality.
Additive manufacturing (AM) can revolutionise engineering by taking advantage of unconstrained design and overcoming the limitations of traditional manufacturing capabilities. A promising application of AM is in catalyst substrate manufacturing, aimed at the enhancement of the catalytic efficiency and reduction in the volume and weight of the catalytic reactors in the exhaust gas aftertreatment systems. This work addresses the design and fabrication of innovative, hybrid monolithic ceramic substrates using AM technology based on Digital Light Processing (DLP). The designs are based on two individual substrates integrated into a single, dual-substrate monolith by various interlocking systems. These novel dual-substrate monoliths lay the foundation for the potential reduction in the complexity and expense of the aftertreatment system. Several examples of interlocking systems for dual substrates were designed, manufactured and thermally post-processed to illustrate the viability and versatility of the DLP manufacturing process. Based on the findings, the sintered parts displayed anisotropic sintering shrinkage of approximately 14% in the X–Y direction and 19% in the Z direction, with a sintered density of 97.88 ± 0.01%. Finally, mechanical tests revealed the mechanical integrity of the designed interlocks. U-lock and Thread configurations were found to sustain more load until complete failure.
10 May 2022 in The International Journal of Advanced Manufacturing Technology
For heat-assisted single point incremental sheet forming (SPIF) works of Ti-6Al-4 V sheets, the use of lubricant has shown significant effects on surface quality and geometric accuracy at higher temperatures. Molybdenum disulphide (MoS2) is a common lubricant widely used in SPIF works, however, it usually indicates ineffective performance at high temperatures. This article has studied different lubricants of MoS2 lubricants and proposed a novel mixture of MoS2 to provide better surface quality and improve geometric accuracy. A forming tool with a ball-roller and water channel was designed to enable the MoS2 mixture to pass through the tool tip, allowing easy application of the lubricant on the localised area and reduce the thermal expansion on the ball-roller. Surface roughness analysis has revealed that the water-cooling MoS2 mixture performed well in reducing friction effects and achieved better geometric accuracy. Forming forces measurements, scanning electron microscope (SEM), energy-dispersive X-ray analysis (EDX) and micro-hardness tests also indicated that a higher strain hardening behaviour was detected for the water-cooling MoS2 mixture.
5 October 2022 in The International Journal of Advanced Manufacturing Technology
Induction heating-assisted single point incremental sheet forming was established for Ti-6Al-4V thin sheets at closed and above beta-transus temperature (980 °C). In order to eliminate geometric inaccuracy and adherence of lubricant on the surface caused by elevated temperature, a cooling lubricant system was designed for the forming tool to decrease the thermal expansion and friction. A radial basis function (RBF)-based tool path optimisation was developed to study the measured geometric accuracy, temperature, and forming force. By adjusting cooling lubricant control and integrating the RBF framework, the first optimised tool path was used to collect the results and to validate with the finite element (FE) model and theoretical geometric profiles. The output data were further studied by RBF and generate a second optimised tool path. The measured geometric coordinates revealed that the error percentage has been reduced to less than 5%. Further, the microstructure evolution analysed by scanning electron microscopy (SEM) indicated noticeable oxidation and alpha-layer for temperature around 1040 °C and the phenomenon was removed at temperature closed to 950 °C. The surface roughness and energy-dispersive X-ray analysis (EDX) revealed the optimised tool path distributed significant improvement in surface quality. The cooling lubricant system indicated optimal performance with RBF optimised tool path to support constant temperature and reduce friction and lubricant adherence on the surface.
6 October 2022 in The International Journal of Advanced Manufacturing Technology
To relate the thermomechanical behaviour and microstructural evolution of the heat-assisted incremental sheet forming (SPIF) for Ti–6Al–4 V sheet, multi-scale models based on crystal plasticity finite element model (CPFEM), representative elementary volume (RVE), and cellular automaton (CA) were established in this article. An experimental-scale CPFEM was built in advance to provide macrograin level strain, strain rate, and temperature output data, which were then used in RVE and CA as inputs to simulate the microstructural evolution throughout the SPIF process. The output results include the pole figures, dynamic recrystallisation (DRX) maps, and statistics results of the alpha (α) phase of the Ti–6Al–4 V (α-Ti) alloy from stage to stage throughout the 700 $$^\circ{\rm C}$$ SPIF. The obtained statistics results of dislocation density, grain orientation angles, and grain size were verified with electron backscatter diffraction (EBSD). The CA analysis of the DRX progress at the upper, centre, and lower regions of the deformed workpiece has discovered that the incremental increase of the strain rate has significant effects on the dislocation density that produced a proportional relationship to the DRX percentage. The results revealed that the strain rate has strong domination in affecting the slip of grains orientation, which overcomes the effect of temperature increase in this SPIF process. Furthermore, it was found that a large amount of DRXed grains were generated at the grain boundaries, which reduced the mean grain size and increased the DRX percentage, which produced an inversely proportional relationship to the dislocation density. The thermomechanical behaviour on the SPIF workpiece was increased incrementally, which is insufficient for DRX initiation in the upper region, and the behaviour was enhanced at the centre and lower region, which can be corresponded to the microstructural evolution throughout the process.