Calculating the back electro-motive force (EMF) in a synchronous permanent magnet motor (PMSM) is difficult for its drive control system. In this article, a sensorless robust control scheme combining an improved back EMF observer and an extended state observer (ESO) is presented. First, the back EMF equivalent signal is obtained by a sliding mode observer (SMO), and the improved back EMF observer (IBEO) is proposed based on the back EMF model. By contrast with the traditional back EMF observer, the proposed IBEO considers the uncertainty and dynamic components of the motor mathematic model, suppresses the signal chattering by the adaptive mechanism, and has a smaller estimation error and the faster convergence rate. Afterwards, an ESO is built to estimate the rotor position, the rotor speed and the total disturbance. Based on the ESO, the adaptive robust speed controller is designed. Additionally, the stability of the IBEO and robust speed controller are proved by the Lyapunov stability theory. Finally, the effectiveness and feasibility of the presented control scheme were verified by the experiment work. The sensorless control scheme showed the stronger antiinterference capability and robustness with small chattering.
11 March 2015 in IEEE Transactions on Automatic Control
This note proposes a robust integral sliding mode (RISM) manifold and a corresponding design method for stabilization control for uncertain systems with control input time delay. Delay-independent sufficient condition for the existence of the RISM surface is given in terms of LMI. An improved sliding mode control (SMC), which is delay-dependent and suitable for small input time delay, keeps system stay on the neighborhood of the RISM surface in finite time. With uncertainties and disturbances, the reaching condition for the neighborhood of the RISM is satisfied. Furthermore, the control makes second-order sliding mode. Based on a numerical example, the proposed method is verified to be efficient and feasible.
1 August 2020 in Nonlinear Analysis: Hybrid Systems
This article studied the stability and convergence of a robust iterative learning control (ILC) design for a class of nonlinear systems with unknown control input delay. First, the iterative integral sliding mode (IISM) design was proposed, which comprised iterative actions. The iterative action made the convergence of the tracking error under the ideal sliding mode. Then, a suitable iterative update law was provided for the IISM-based robust ILC controller. The controller had the capability of both minimizing the steady tracking error and suppressing the unrepeatable disturbance. Using the controller, the closed-loop system stability was analyzed, and the stability conditions were given. Consequently, the sliding mode convergence in the iteration domain was proved by a composite energy function (CEF). In addition, by analyzing the influence of affection on the tracking error, several measures were taken to solve the chattering problem of the sliding mode control. Finally, a one-link robotic manipulator and a vertical three-tank system were used to verify the control design. The application simulations validated the performance of the proposed sliding mode iterative learning control (SMILC) design, which achieved the stability of the nonlinear system and overcame the control input time delay.
22 July 2016 in Transactions of the Institute of Measurement and Control
Traditional underwater vehicles are limited in speed due to dramatic friction drag on the hull. Supercavitating vehicles exploit supercavitation as a means to reduce drag and increase their underwater speed. Compared with fully wetted vehicles, the non-linearity in the modelling of cavitator, fin and in particular the planing force make the control design of supercavitating vehicles more challenging. Dominant non-linearities associated with planing force are taken into account in the model of supercavitating vehicles in this paper. Two controllers are proposed to realize stable system dynamics and tracking responses, a linear quadratic regulator (LQR) control scheme and a robust backstepping control (RBC) scheme. The proposed backstepping procedure, in association with integral filters technique, exploits the possibility of avoiding the overparameterization problem existing in the classical backstepping process. In particular, the achieved stability is robust to modelling errors in supercavitating vehicles. Compared with the LQR control scheme, the RBC scheme is seen to increase the robustness with saturation compensation algorithm, which can be useful for avoiding actuator saturation in magnitude.