This article presents a novel system reliability-based framework for multi-objective optimisation of preventive maintenance (PM) management of in-service asphalt pavement. To accurately predict the international roughness index (IRI) sequence of pavement sections, a long short-term memory (LSTM) neural network that considers the spatiotemporal correlations between IRI sequences is trained with data retrieved from the long-term pavement performance (LTPP) program. Based on time-dependent limit-state functions (LSFs) incorporating the uncertainty associated with LSTM neural network prediction and the observational error involved in IRI measurement, Monte Carlo simulation (MCS) with importance sampling (IS) is adopted to calculate the reliability of pavement sections. Pavement sections located in New Mexico and Montana are selected as illustrative examples. Tri-objective optimisation processes are investigated by maximising user benefits (i.e. improved system reliability) and agency benefits (i.e. extended service life) while minimising the associated life-cycle cost (LCC) (i.e. user and agency costs) with multi-objective genetic algorithms (GAs). The obtained Pareto solution sets may assist decision-makers in the selection of well-balanced solutions to identify the optimal timing for applying PM treatments to in-service asphalt pavement.
18 September 2020 in Structure and Infrastructure Engineering
It is widely recognized that reliability-based optimization methodologies are rational and promising tools to perform the life-cycle management (LCM) of civil engineering structures. In order to realize the optimal design and maintenance of asphalt pavement, a comprehensive reliability-based optimization methodology considering the life-cycle cost (LCC) is proposed in this paper. Considering the powerful ability of Artificial Neural Networks (ANNs) to solve complex and nonlinear problems, ANNs are implemented to predict the performance of asphalt pavement based on the training data (i.e. structural, traffic, climatic, and performance parameters) selected from the Long-Term Pavement Performance (LTPP) program. Monte Carlo simulation (MCS) with Importance Sampling (IS) is conducted based on the obtained ANNs model to calculate the life-cycle reliability of asphalt pavement. Finally, the expected LCC including the initial construction cost, the preventive maintenance cost, inspection cost, users cost, and salvage value is minimized while maintaining a prescribed life-cycle reliability level for asphalt pavement. Several applications are presented to investigate the effects of traffic and climatic parameters on reliability-based optimum cost solution.
The galvanostatic method has been widely used for accelerating the corrosion of reinforcing bars in concrete to complete test studies within a reasonable timeframe. However, which level of current density induces characteristics of steel corrosion spatial variability and the associated structural performance of corroded reinforced concrete (RC) beams that are similar to those observed under natural conditions remains unknown. In this paper, comprehensive experimental research is conducted to compare the characteristics of spatial growth in steel weight loss and crack width and the structural behavior of corroded RC beams by two corrosion-accelerated methods (i.e. galvanostatic method at six current densities and artificial chloride environment method). The effects of these corrosion acceleration methods on Gumbel’s location and scale distribution parameters and the associated yield load capacity of corroded RC beams are investigated using Monte Carlo-based two-dimensional finite element analysis. Finally, a suitable current density is recommended to better simulate the steel corrosion distribution and the associated yield load capacity of RC beams in comparison to those observed under an artificial chloride environment.