Asphalt mastic plays an important role in asphalt mixtures for pavement engineering. Understanding the asphalt–filler interaction behavior is essential to improve the pavement performance of asphalt mastics. The objective of this paper was to evaluate the asphalt–filler interaction ability based on macro-rheological measurements and to investigate the asphalt–filler interaction mechanism associated with microstructural characteristics of asphalt mastics. First, the asphalt–filler interaction was characterized using macro-rheological features of asphalt mastics based on dynamic shear rheometer (DSR) tests. Second, the physico-chemical interaction between the asphalt and filler was qualitatively evaluated using a Fourier transform infrared (FTIR) spectrometer. Third, the asphalt–filler interaction behavior was investigated in terms of the micro-morphological properties of mineral fillers and asphalt mastics by conducting scanning electron microscopy (SEM) and atomic force microscope (AFM) tests. Finally, the grey relational analysis (GRA) was employed to identify the correlation between the properties of mineral fillers and the macro–micro performances of asphalt mastics. The results show that a higher content of alkaline mineral filler within the critical volume fraction range produced a greater interaction ability between the asphalt and filler. The asphalt–filler interaction is mainly a physical action since no obvious new adsorption peaks appeared in the FTIR spectrum. The micro-morphological characteristics of asphalt mastic mainly depended on the adsorption effect of mineral fillers on polar fractions and the dispersion effect of mineral fillers on wax crystals in the asphalt binder. Based on the results of the GRA, the acidity and content of mineral fillers exhibited a great influence on the micro-morphological and macro-rheological characteristics of asphalt mastics, and the specific surface area of the mineral filler exerted a significant influence on the asphalt–filler interaction ability. Furthermore, the K-B- index was more appropriate for evaluating the asphalt–filler interaction ability.
The asphalt mastic–aggregate interface plays an essential role in determining the service performance of asphalt mixtures. The objective of this paper was to investigate the adhesion behaviors and mechanism between asphalt mastic and aggregate based on molecular dynamic (MD) simulations. First, the asphalt mastic model considering the actual mass ratio of filler to asphalt (F/A) condition was established and validated in terms of thermodynamic properties. Second, the molecular arrangement characteristics of polar components on the aggregate substrate were analyzed by radial distribution function (RDF), relative concentration (RC), and mean square displacement (MSD). Third, the interfacial adhesion ability between asphalt and aggregate was quantitively evaluated based on the work of adhesion. Finally, the coupling effect of moisture and temperature on interfacial adhesion behaviors was investigated to explore the adhesion failure characteristics of the asphalt–aggregate interface. The results demonstrate that the thermodynamic properties could be employed to validate the reliability of the asphalt mastic model. The self-aggregation degree of polar components in base asphalt could be significantly increased with the addition of silica particles, exhibiting a change of configuration from “parallel arrangement” into “stack distribution” due to the high polarity of silica particles. The polar components in asphalt mastic exhibit a more uniform distribution state and lower mobility capability than base asphalt owing to the adsorption effect of silica particles. Silica particles with amounts of residual charges could significantly increase the electrostatic energy of the asphalt mastic–aggregate interface, contributing to an improvement of the adhesion between asphalt mastic and aggregate. The increase of temperature enhances the work of adhesion of the asphalt mastic–aggregate interface, which is opposite to that of the base asphalt–aggregate interface. The asphalt mastic exhibits a greater sensitivity to interfacial moisture damage than base asphalt. The findings would provide insights into a better understanding on the micro adhesion mechanism of the asphalt mastic–aggregate interface.
1 April 2021 in Construction and Building Materials
Asphalt pavement, widely utilized in transportation infrastructure due to its favourable properties, faces significant degradation from chloride salt erosion in coastal areas and winter deicing regions. In this study, two commonly used asphalt binders, 70# base asphalt and SBS (Styrene–Butadiene–Styrene)-modified asphalt, were utilized to study the chloride salt erosion effect on asphalt pavement by immersing materials in laboratory-prepared chloride salt solutions. The conventional properties and adhesion of asphalt were assessed using penetration, softening point, ductility, and pull-off tests, while Fourier transform infrared spectroscopy (FTIR) elucidated the erosion mechanism. The Marshall stability test, freeze–thaw splitting test, and Cantabro test were applied to study the effects of chloride exposure on the strength, water stability, and structural integrity of the asphalt mixture. Finally, the grey correlation analysis was employed to assess the impact of chloride salt erosion on the performance of asphalt binders and mixtures. The findings highlight that chloride salt erosion reduces penetration and ductility in both types of asphalt binders, raises the softening point, and weakens asphalt–aggregate adhesion, confirmed as a primarily physical effect by FTIR analysis. Asphalt mixtures showed decreased strength and water stability, intensifying these impacts at higher chloride concentrations and longer erosion duration. SBS-modified asphalt binders and mixtures exhibited greater resistance to chloride salt erosion, particularly in adhesion, as demonstrated by the Cantabro and pull-out tests. Grey relational analysis revealed that erosion duration is the most influential factor, with TSR and softening point emerging as the most responsive indicators of chloride-induced changes. These findings offer critical insights for practice, providing evidence-based guidance for designing and constructing asphalt pavements in environments with high chloride levels.