Jie Yuan

Prof. Dr. Jie Yuan

college of transportation, Tongji University, Shanghai, China
orcid

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 June 2020 in Materials
Verified
Journal Article
Open access
PDF file
WXWenyi Xu
Wenyi Xu
XQXin Qiu
Xin Qiu
SXShanglin Xiao
Shanglin Xiao
HHHaojue Hong
Haojue Hong
FWFeng Wang
Feng Wang
JYJie Yuan
Jie Yuan
Asphalt mastic plays an important role in asphalt mixtures for pavement engineering. Understanding the asphalt–filler interaction behavior is essential to improve the pavement performance of asphalt mastics. The objective of this paper was to evaluate the asphalt–filler interaction ability based on macro-rheological measurements and to investigate the asphalt–filler interaction mechanism associated with microstructural characteristics of asphalt mastics. First, the asphalt–filler interaction was characterized using macro-rheological features of asphalt mastics based on dynamic shear rheometer (DSR) tests. Second, the physico-chemical interaction between the asphalt and filler was qualitatively evaluated using a Fourier transform infrared (FTIR) spectrometer. Third, the asphalt–filler interaction behavior was investigated in terms of the micro-morphological properties of mineral fillers and asphalt mastics by conducting scanning electron microscopy (SEM) and atomic force microscope (AFM) tests. Finally, the grey relational analysis (GRA) was employed to identify the correlation between the properties of mineral fillers and the macro–micro performances of asphalt mastics. The results show that a higher content of alkaline mineral filler within the critical volume fraction range produced a greater interaction ability between the asphalt and filler. The asphalt–filler interaction is mainly a physical action since no obvious new adsorption peaks appeared in the FTIR spectrum. The micro-morphological characteristics of asphalt mastic mainly depended on the adsorption effect of mineral fillers on polar fractions and the dispersion effect of mineral fillers on wax crystals in the asphalt binder. Based on the results of the GRA, the acidity and content of mineral fillers exhibited a great influence on the micro-morphological and macro-rheological characteristics of asphalt mastics, and the specific surface area of the mineral filler exerted a significant influence on the asphalt–filler interaction ability. Furthermore, the K-B- δ index was more appropriate for evaluating the asphalt–filler interaction ability.

10 November 2020 in Materials
Verified
Journal Article
Open access
PDF file
WXWenyi Xu
Wenyi Xu
XQXin Qiu
Xin Qiu
SXShanglin Xiao
Shanglin Xiao
GHGanghua Hu
Ganghua Hu
FWFeng Wang
Feng Wang
JYJie Yuan
Jie Yuan
The asphalt mastic–aggregate interface plays an essential role in determining the service performance of asphalt mixtures. The objective of this paper was to investigate the adhesion behaviors and mechanism between asphalt mastic and aggregate based on molecular dynamic (MD) simulations. First, the asphalt mastic model considering the actual mass ratio of filler to asphalt (F/A) condition was established and validated in terms of thermodynamic properties. Second, the molecular arrangement characteristics of polar components on the aggregate substrate were analyzed by radial distribution function (RDF), relative concentration (RC), and mean square displacement (MSD). Third, the interfacial adhesion ability between asphalt and aggregate was quantitively evaluated based on the work of adhesion. Finally, the coupling effect of moisture and temperature on interfacial adhesion behaviors was investigated to explore the adhesion failure characteristics of the asphalt–aggregate interface. The results demonstrate that the thermodynamic properties could be employed to validate the reliability of the asphalt mastic model. The self-aggregation degree of polar components in base asphalt could be significantly increased with the addition of silica particles, exhibiting a change of configuration from “parallel arrangement” into “stack distribution” due to the high polarity of silica particles. The polar components in asphalt mastic exhibit a more uniform distribution state and lower mobility capability than base asphalt owing to the adsorption effect of silica particles. Silica particles with amounts of residual charges could significantly increase the electrostatic energy of the asphalt mastic–aggregate interface, contributing to an improvement of the adhesion between asphalt mastic and aggregate. The increase of temperature enhances the work of adhesion of the asphalt mastic–aggregate interface, which is opposite to that of the base asphalt–aggregate interface. The asphalt mastic exhibits a greater sensitivity to interfacial moisture damage than base asphalt. The findings would provide insights into a better understanding on the micro adhesion mechanism of the asphalt mastic–aggregate interface.

1 March 2017 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
JYJie Yuan
Jie Yuan
Hang LuHang Lu
Hang Lu
QYQuanbing Yang
Quanbing Yang
JLJianming Ling
Jianming Ling
In this paper, the effects of NaCl concentration on saturation in concrete and ice-formation pressure and volume expansion of solutions are investigated; also, mechanisms of concrete salt-frost scaling are analyzed. Results show that the ice-formation pressure and volume expansion of solutions are significantly reduced with increased NaCl concentration, which positively affects the reduction of salt-frost scaling of concrete. On the other hand, the capillary-uptake degree of saturation and water-uptake rate in concrete obviously increase with increased NaCl concentration, which negatively affects the reduction of salt-frost scaling. According to the measured data, the ice-formation pressure in concrete is calculated, and the result quantitatively proves that the ice-formation pressure generated by 2–6% NaCl solution causes maximal concrete damage.

2 November 2021 in Materials
Verified
Journal Article
Open access
PDF file
JYJie Yuan
Jie Yuan
WLWenhao Li
Wenhao Li
YLYuening Li
Yuening Li
LMLukuan Ma
Lukuan Ma
JZJiake Zhang
Jiake Zhang
The fatigue model plays an important role in the mechanistic–empirical design procedure of airfield pavement. As for cement concrete pavement, the fatigue model represents the relationship between the stress and the number of load repetitions. To further understand the fatigue model, a literature review was performed in this paper along with the discussion. In this paper, the developed fatigue models available now were classified as the full-scale testing-based fatigue model and the concrete beam testing-based fatigue model, according to the data source. Then, the regression analysis process and stress calculation method of each fatigue model were summarized. Besides, the fatigue model proposed by the Federal Aviation Administration (FAA) was compared with the fatigue model of the Civil Aviation Administration of China (CAAC). The design thicknesses using the two models were obtained based on the finite element analysis. The results show that the designed slab using the fatigue model of FAA is thicker than that of CAAC, meaning that the fatigue model of FAA is comparatively conservative. Moreover, it can be concluded that the differences in the slab thickness become more significant with the increase in the wheel load and the foundation strength. Finally, the recommendation was proposed to refine the fatigue model in the future study from three aspects: data source, stress calculation method, and regression analysis process.

31 March 2023 in Buildings
Verified
Journal Article
Open access
PDF file
JZJiake Zhang
Jiake Zhang
ZLZhang Liupeng
Zhang Liupeng
BXBoyang Xu Boyang Xu
Boyang Xu Boyang Xu
JYJie Yuan
Jie Yuan
The preparation of recycled concrete aggregate generates a lot of fines, which are obstacles for implementing the recycled concrete aggregate. In this work, carbonation treatment is applied to improve the properties of recycled concrete fine, and the influences of carbonated recycled concrete fine (CRCF) on cement hydration process are evaluated. Both fresh and hardened properties of the cement paste samples replacing 0 to 30% of the CRCF are measured. The results reveal that the addition of CRCF obviously accelerates the hydration process of cement, especially during the early stage, and the initial and final setting times of the cement paste containing 30% CRCF are both reduced by approximately 25% compared to the control. The CRCF improves the strength gain of cement, and that influence becomes obvious with longer curing; the relative compressive strength of cement paste containing 30% CRCF is increased by 18% relative to the control after being cured for 28 days. At the same time, the early hydration of cement paste is accelerated with the addition of CRCF and the total hydration heat after 48 h of cement paste is significantly decreased with the addition of CRCF. Specifically, the total hydration heat after 48 h of cement paste with 30% CRCF is less than 50% of that with 0% CRCF. Besides that, CRCF consumes CH in cement paste and improves the pore structure of hardened cement paste. The morphology of hydrated samples shows that the shape of ettringite formed within the control sample with 0% CRCF is longer than those of the other ones formed in cement paste with CRCF, and the length decreases as the CRCF contents increase. In addition, the sample containing 30% CRCF does not show the particles, which means that CRCF reduces the ettringite forming in hardened paste samples. Thus, the findings from this work provide a better understanding of the field of waste concrete reuse.

25 December 2024 in Buildings
Verified
Journal Article
Open access
PDF file
CZCe Zhao
Ce Zhao
HJHuacheng Jiao
Huacheng Jiao
BZBing Zhou
Bing Zhou
FLFei Liu
Fei Liu
FZFeilin Zhang
Feilin Zhang
JYJie Yuan
Jie Yuan
To understand the mechanical behavior of CRTS (China Railway Track System) II cement emulsified asphalt mortar (CA mortar), this study tested the compressive strength and flexural strength of CA mortar at different ages under varying water-to-cement ratios and dosages of water-reducing agent. Based on X-ray diffraction (XRD) and scanning electron microscopy (SEM) results, the hydration products and microstructure of CA mortar at different ages were analyzed. The main conclusions are as follows. As the water-to-cement ratio increases, the compressive strength and flexural strength of CA mortar generally exhibit a decreasing trend. The strength increases rapidly in the early stages, with the 7-day compressive strength reaching over 80% of the 28-day compressive strength, and the 7-day flexural strength reaching over 93% of the 28-day flexural strength. As the dosage of water-reducing agent increases, both the compressive strength and flexural strength of CA mortar first increase and then decrease, with a reasonable range of water-reducing agent dosage being between 0.2% and 1.0%, and 0.5% is most appropriate. The hydration reaction of CA mortar is nearly complete at 3 days, with the increase in ages, the cement hydration slows down due to the coating action of asphalt, and the strength no longer changes greatly. Hydration products are mainly Ettringite, which is the main source of strength of CA mortar. After the emulsified asphalt breaks, it adsorbs onto the hydration products and sand surfaces, gradually forming a continuous phase, which enhances the structural toughness of the CA mortar.