Shuang Yang

Dr. Shuang Yang

Shenyang University of Technology
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 February 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
He ZhangHe Zhang
He Zhang
SYShuang Yang
Shuang Yang
JZJian Zeng
Jian Zeng
XLXin Li
Xin Li
RCRongyan Chuai
Rongyan Chuai
When the free end of a microcantilever is modified by a genetic probe, this sensor can be used for a wider range of applications, such as for chemical analysis, biological testing, pharmaceutical screening, and environmental monitoring. In this paper, to clarify the preparation and detection process of a microcantilever sensor with genetic probe modification, the core procedures, such as probe immobilization, complementary hybridization, and signal extraction and processing, are combined and compared. Then, to reveal the microcantilever’s detection mechanism and analysis, the influencing factors of testing results, the theoretical research, including the deflection principle, the establishment and verification of a detection model, as well as environmental influencing factors are summarized. Next, to demonstrate the application results of the genetic-probe-modified sensors, based on the classification of detection targets, the application status of other substances except nucleic acid, virus, bacteria and cells is not introduced. Finally, by enumerating the application results of a genetic-probe-modified microcantilever combined with a microfluidic chip, the future development direction of this technology is surveyed. It is hoped that this review will contribute to the future design of a genetic-probe-modified microcantilever, with further exploration of the sensitive mechanism, optimization of the design and processing methods, expansion of the application fields, and promotion of practical application.

27 February 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
He ZhangHe Zhang
He Zhang
SYShuang Yang
Shuang Yang
RCRongyan Chuai
Rongyan Chuai
XLXin Li
Xin Li
XMXinyu Mu
Xinyu Mu
In order to investigate the influence of the unit junction on the micromixer performance, a repetitive structure micromixer with a total length of 12.3 mm was proposed. This micromixer consists of a T-shape inlet channel and six cubic mixing units, as well as junctions between them. Numerical simulations show that, when the junctions are all located at the geometric center of the cubic mixing unit, the outlet mixing index is 72.12%. At the same flow velocity, the best mixing index achieved 97.15% and was increased by 34.68% when the junctions were located at different corners of the cubic mixing unit. The improvement in the mixing index illustrated that the non-equilibrium vortexes generated by changing the junction location to utilize the restricted diffusion by the mixing unit’s side wall could promote mixing. Visual tests of the micromixer chip prepared by 3D printing were consistent with the simulation results, also indicating that the junction location had a significant influence on the mixer’s performance. This article provides a new idea for optimizing the structural design and improving the performance of micromixers.

25 June 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
SYShuang Yang
Shuang Yang
He ZhangHe Zhang
He Zhang
SYShuihua Yang
Shuihua Yang
YZYunlong Zheng
Yunlong Zheng
JWJianan Wang
Jianan Wang
RCRongyan Chuai
Rongyan Chuai
In this paper, a sequence of passive micromixers with spiral patterns on the side wall of cylindrical chambers are designed, optimized, prepared and tested. The simulation studies show that the vortex magnitude and continuity in the mixing chamber are the most important factors to determine mixing performance, while the inlet position and structural parameters are secondary influences on their performance. According to the above principles, the performance of a micromixer with a continuous sidewall spiral finally wins out. The total mixing length is only 14 mm, but when Re = 5, the mixing index can reach 99.81%. The multi-view visual tests of these mixer chips prepared by 3D printing are consistent with the simulation results. This paper provides a new idea for optimizing the micromixer with spiral patterns on the side wall and the problems of floor area and pressure loss are significantly improved compared to the conventional spiral structure.

8 July 2025 in Sensors
Verified
Journal Article
Open access
PDF file
ZLZibo Lan
Zibo Lan
YHYing Hu
Ying Hu
SYShuang Yang
Shuang Yang
JRJiayun Ren
Jiayun Ren
He ZhangHe Zhang
He Zhang
This study proposes a deep learning-based, non-contact method for detecting elevated intraocular pressure (IOP) by integrating Scheimpflug images with corneal biomechanical features. Glaucoma, the leading cause of irreversible blindness worldwide, requires accurate IOP monitoring for early diagnosis and effective treatment. Traditional IOP measurements are often influenced by corneal biomechanical variability, leading to inaccurate readings. To address these limitations, we present a multi-modal framework incorporating CycleGAN for data augmentation, Swin Transformer for visual feature extraction, and the Kolmogorov–Arnold Network (KAN) for efficient fusion of heterogeneous data. KAN approximates complex nonlinear relationships with fewer parameters, making it effective in small-sample scenarios with intricate variable dependencies. A diverse dataset was constructed and augmented to alleviate data scarcity and class imbalance. By combining Scheimpflug imaging with clinical parameters, the model effectively integrates multi-source information to improve high IOP prediction accuracy. Experiments on a real-world private hospital dataset show that the model achieves a diagnostic accuracy of 0.91, outperforming traditional approaches. Grad-CAM visualizations identify critical anatomical regions, such as corneal thickness and anterior chamber depth, that correlate with IOP changes. These findings underscore the role of corneal structure in IOP regulation and suggest new directions for non-invasive, biomechanics-informed IOP screening.

1 January 2021 in Energy Engineering
Verified
Journal Article
Open access
YLYukun Lv
Yukun Lv
Wei ZhuangWei Zhuang
Wei Zhuang
QGQuanzhi Ge
Quanzhi Ge
FYFan YANG
Fan YANG
SYShuang Yang
Shuang Yang
The water-cooling heat dissipation technology can solve the heat dissipation and noise problems of the calculation plate. Therefore, the structural design of the water-cooling plate directly affects its flow and heat transfer characteristics, which restricts the promotion and application of the technology. To this end, the water-cooling plate of a heat dissipation system was taken as the research object, and its flow and heat transfer characteristics were numerical simulated and experimental studied. Through comparative analysis, the rationality of the numerical simulation method was verified. Based on this, three improved schemes of water-cooling plate structure were proposed and numerical simulation was carried out, and the optimal model was verified by experiments. The results of the study show that compared with the original water-cooling plate, the optimized water-cooling plate has increased internal flow velocity and distributes uniformly, increased heat transfer amount by 4.2%, and the average temperature of the calculation plate decreased by 5.3%.