The composition of plastic and multilayer packaging waste was assessed in the mixed municipal solid waste (MSW) streams of the Kaunas (Lithuania), Daugavpils (Latvia) and Tallinn (Estonia) municipalities. For the analysis of samples in the mixed MSW streams, the authors used manual sorting and a visual recognition method. Composition analysis of plastic and multilayer packaging waste from separately collected waste of multi-family and single-family households was performed in the Kaunas and Tallinn municipalities. For the analysis of samples in the separately collected waste streams, the research group combined manual sorting and near-infrared (NIR) spectroscopy methods. The findings reveal that the percentage distribution of plastic and multilayer packaging waste within the municipal solid waste (MSW) stream is relatively consistent across the municipalities of Kaunas, Daugavpils and Tallinn, comprising 40.16%, 36.83% and 35.09%, respectively. However, a notable variation emerges when examining separately collected plastic and multilayer packaging waste streams. In this category, the proportion of plastic and multilayer packaging within the total separately collected packaging waste stream ranges from 62.05% to 74.7% for multi-family residential buildings and from 44.66% to 56.89% for single-family residential buildings. The authors provided further insights for the enhanced recycling potential of different plastic materials through improved sorting.
Biopolymers and bio-based plastics, such as polylactic acid (PLA) and polybutylene succinate (PBS), are recognized as environmentally friendly materials and are widely used, especially in the packaging industry. The purpose of this study was to assess the degradation of PLA- and PBS-based formulations in the forms of granules and films under controlled composting conditions at a laboratory scale. Biodegradation tests of bio-based materials were conducted under controlled aerobic conditions, following the standard EVS-EN ISO 14855-1:2012. Scanning electron microscopy (SEM) was performed using a high-resolution Zeiss Ultra 55 scanning electron microscope to analyze the samples. After the six-month laboratory-scale composting experiment, it was observed that the PLA-based materials degraded by 47.46–98.34%, while the PBS-based materials exhibited a final degradation degree of 34.15–80.36%. Additionally, the PLA-based compounds displayed a variable total organic carbon (TOC) content ranging from 38% to 56%. In contrast, the PBS-based compounds exhibited a more consistent TOC content, with a narrow range from 53% to 54%. These findings demonstrate that bioplastics can contribute to reducing plastic waste through controlled composting, but their degradation efficiency depends on the material composition and environmental conditions. Future efforts should optimize bioplastic formulations and composting systems while developing supportive policies for wider adoption.