A key factor in ensuring the stability and ductility of asphalt pavements is interlayer fatigue resistance. Interlayer bonding characteristics are one of the most significant elements influencing the lifespan of asphalt pavements. Poor bonding properties often lead to debonding, slippage cracking, and pavement deformation. The primary cause of interlayer slippage cracking is a lack of interface bonding between an asphalt overlay and underlayer, which is typically triggered by vehicle braking and turning. Emulsified asphalt, modified asphalt, and hot asphalt are just a few of the materials that are used as tack coats to address this issue. This paper examines five different bonding types between interlayers: a model with no tack coat, a model with SBS-modified hot asphalt, a model with SBS-modified asphalt emulsion, a model with an epoxy resin binder, and a model with SK-90 hot asphalt. This study evaluates the shear fatigue of asphalt pavement under a single wheel cycle load. A model is created using the Abaqus software to predict fatigue life while taking into account the various tack coat materials listed above. Considering the outcomes of this study, the best bonding type for asphalt pavement is SBS-modified hot asphalt. After selecting this material, various tack coat thicknesses were used until the optimum thickness of 6 mm was determined. The proposed model can withstand more load cycles and less rutting depth, which helps to prevent interlayer fatigue failure over the course of a pavement’s design life.
The increasing need for materials that are both lightweight and strong in the aerospace and automotive sectors has driven the extensive use of composite sandwich structures. This study examines the impact response of honeycomb sandwich composites fabricated using the vacuum-assisted resin transfer molding (VARTM) technique. Two configurations were analyzed, namely carbon–honeycomb–carbon (CHC) and carbon–Kevlar–honeycomb–Kevlar–carbon (CKHKC), to assess the effect of Kevlar reinforcement on impact resistance. Charpy impact testing was conducted to evaluate energy absorption, revealing that CKHKC composites exhibited significantly superior impact resistance compared to CHC composites. The CKHKC composite achieved an average impact strength of 70.501 KJ/m2, which is approximately 73.8% higher than the 40.570 KJ/m2 recorded for CHC. This improvement is attributed to Kevlar’s superior toughness and energy dissipation capabilities. A comparative assessment of impact energy absorption further highlights the advantages of hybrid Kevlar–carbon fiber composites, making them highly suitable for applications requiring enhanced impact performance. These findings provide valuable insights into the design and optimization of high-performance honeycomb sandwich structures for impact-critical environments.